View source for TRB141 Powering Options

{{Template: networking_trb_manual_powering_options
<!------------------------DEVICE----------------------->
| name   = TRB141
| series = TRB1
<!----------------------SEPARATORS--------------------->
| eth    = 0         <!-- 1 - has Ethernet; 0 - does not have Ethernet -->
| rs485  = 0         <!-- 1 - can be powered over RS485; 0 - cannot be powered over RS485 -->
| pin    = 4 pin     <!-- 4 pin - 4 pin connector; 16 pin - 16 pin terminal block connector -->
| psu    = 9 VDC     <!-- Standard PSU -->
| volts  = 9-30 VDC  <!-- Input voltage range -->
}}