View source for Template:Networking tsw0 manual powering options

This chapter contains information on powering options supported by {{{name}}} switch. 

__TOC__

The switch has a 2 pin power socket and can be powered by a 7-30 VDC power supply unit (PSU). Refer to the image below for the power socket's pinout information: 

==Power socket==

{{Template: Networking_{{lc:{{{series}}}}}_manual_power_socket_pinout}}

{{#ifeq:{{{poe}}}|1|<b>Note</b> that {{{name}}} PoE ports works properly when switch is powered using PSU, which can supply 44 VDC or higher voltages. If {{{name}}} switch is powered with voltages ranging from 7 VDC to 43 VDC, it will work as standard switch, without PoE capabilities.|}}

{{#ifeq:{{{passive_poe}}}|1|
{{Template: networking_device_manual_powering_options_passive_poe
  | series    = {{{series}}}
  | file_lan1 = {{{file_lan1}}}
  | size_lan1 = {{{size_lan1}}}
}}|}}

[[Category:{{{name}}} Manual]]