View source for RUT950 Firmware Downloads

{{Template: Networking_rutos_firmware_downloads
<!------------------------DEVICE----------------------->
| name         = RUT950
| series       = RUT9
}}

==Changelog==
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.5.4/RUT9/RUT9_R_00.07.05.4_WEBUI.bin RUT9_R_00.07.05.4]</span></b> | 2023.11.09===
 
* <b>Improvements</b>
** <b>WebUI</b>
*** Improved events log loading logic to reduce device load in certain pages

===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.5/RUT9/RUT9_R_00.07.05_WEBUI.bin RUT9_R_00.07.05]</span></b> | 2023.10.09===
 
* <b>New</b>
** <b>Network</b>
*** Added "shared.m2m.ch" APN for Swisscom IoT operator to APN database
*** Added "gamma" APN to auto-APN database
*** Added "soracom.io" APN for Soracom operator to APN database
*** Added "simbase" APN to auto-APN database
*** Added "pnd" APN for Pond IoT to auto-APN database
*** Added "spitfire1" APN for Spitfire operator to APN database
*** Software Offloading enabled on default configuration 
*** New argument in "gsmctl" CLI command for Carrier aggregation
*** Numeric mode support for modem AT commands
*** Enabled dynamic MTU configuration on mobile interfaces by default
*** WDS support for wireless bridging
** <b>Services</b>
*** DLMS Client package
*** 7zip package
*** TincVPN package
*** Added router uptime and mobile connection uptime data parameters to SNMP
*** Custom MQTT publisher/subscriber topics definition support 
*** Alternative configuration file upload support for MQTT Broker service
*** Device Provisioning Service support for Azure IoT Hub service
*** Added more mobile usage parameters to SNMP
*** SIM Idle Protection package
** <b>WebUI</b>
*** Firewall status page
*** Page search feature
*** Network Topology page
*** "Allow insecure connection" option for MQTT TLS protocol in Data to Server service
*** Package Restore feature Enable/Disable option
*** Hotspot client connection/disconnection trap option for SNMP service
*** Added Events log trap option for SNMP service
*** Confirm dialog when cancelling a verified package in Package Manager
*** "Bridge ALPN" option for Bridge configuration in MQTT Broker service
*** New subtypes of events that specify a specific port on "Events Reporting" and "SNMP Trap rules" pages
*** Specific firmware packages repository link in Package Manager page 
*** Ability to enter decryption passphrase for encrypted private keys 
*** "Reconnect" button in RMS page
*** New event "Device startup completed" in Events Reporting service 
*** Wireless interface QR code generator
*** Channel analysis page Status -> Wireless -> Channel Analysis
*** Disabled direct network interface deletion when it is associated with a wireless interface
*** Limited to a single section configuration and added IP address field for Relayd service
*** "Fast roaming" configuration for Wireless service in Client mode
*** Updated Status->Network->Wireless page to display interfaces as cards and added ability to filter connected clients by selected interface
*** "Write to config" option for SIM Switch action in I/O Juggler service
*** Modem Debug page
*** APN database management page added to package manager
*** Added "Message forwarding" option in SMS Rules page when rule type is "Execute custom script" 
*** Ability to unblock SIM card and insert SIM PIN in Overview page
*** New SMS rules "Reset mobile connection" and "Reload config"
*** "SMS limit clear due" display in Overview page
*** Added modem temperature to System -> Status page
*** IP6 table configuration option for DHCPv6 protocol in Network -> WAN page
** <b>System</b>
*** Mechanism to rebrand WebUI using GPL
*** Possiblity to create web applications with closed-source GPL
 
* <b>Improvements</b>
** <b>Network</b>
*** Moved FRR VTYSH package to package manager
*** Made newly created Firewall Traffic, NAT rules and Port Forwards disabled by default
*** Improved Interfaces to enable IPv6 DHCP server when mobile v6 or v4v6 PDP type is set
*** Improved auto APN selection
*** SMS sending event is now logged into events log
*** Improved roaming control
*** Removed unused APN usernames and passwords from auto-APN database
*** Added connection to the operator when no mobile interfaces are active
*** Improved VoLTE management functions
*** Improved cases where Low Signal Reconnect sometimes executed prematurely
*** Improved wrong SIM PIN remove logic
*** Added automatic reconfiguration when switching between wireless interface modes
*** Added automatically generated name option for new network
*** Improved operator information parsing logic on MeiG modem
** <b>Services</b>
*** New reworked Data to Server
*** UPNP moved to package manager
*** Added IPv6 support for Modbus TCP Server/Client services
*** Refactored Azure IoT Hub service
*** Improved resiliency to timeouts in Modbus Client service
*** Added PDU data type to Modbus read requests
*** Added new formatters for MQTT alarms in Modbus Client service
*** Added main section to make test functions independent in Modbus Client service
*** Improved WAN IP register reading time in Modbus service
*** Sped up default profile and profile template generation for Profiles functionality
*** Optimized profile change time for Profiles functionality
*** Added IPv6 support for Stunnel VPN
*** Added MAC blocking for client connections after set amount of failed login attempts in Hotspot service
*** Improved TCPdump by allowing to capture packets from any interface
*** Added OSPF support for DMVPN
*** Updated Hotspot password hashing to sha512
*** A single SMS message with multiple PDUs is sent instead of multiple SMS messages in Email to SMS service
*** Allowed connection to SMPP server using IPv6 address
*** Extended IP unblock action functionality in SMS Utilities
*** Increased allowed Email to SMS service message size to 61440 bytes
*** Added I/O pin name to trap notification message
** <b>WebUI</b>
*** Reorganized menu
*** Updated header design
*** Split Interfaces configuration in Advanced mode into two pages: WAN and LAN, identically as in Basic WebUI mode
*** Moved Interfaces IPv6 configuration into seperate tab
*** Added client/server status information in OpenVPN instance overview page
*** Added more IPv6 information to interface status in Interfaces page
*** Removed "Custom delegated IPv6-prefix" field from DHCPv6 configuration in Interfaces page
*** Disabled DHCPv6 interface editing while in basic mode
*** Refactored custom DHCP options into seperate modal
*** Added automatic start and end IP allocation for DHCP server configuration in Interfaces
*** Added client/server status information in L2TP VPN page
*** Added "MTU" field to L2TP client configuration page
*** Added CHAP, PAP and MSCHAP-v2 authentication fields to L2TP instance configuration 
*** Added more detailed IPsec VPN status information
*** Encryption AES-256-CBC added as default in OpenVPN
*** Added "Authentication algorithm" support to OpenVPN configuration with static key mode
*** Added GRE (DMVPN) VPN tunnel source support to any instead of specific interface 
*** Improved Hotspot landing page theme package removal
*** Added upload and download theme functionality to Hotspot Landing page
*** Improved ZeroTier VPN bridge configuration
*** Added ability to adjust order of rules in Firewall page
*** Added IPv6 RAW table to be displayed in Status -> Firewall
*** Improved file upload component"s visual appearance
*** Change "Allow anonymous" option default value to 0 in MQTT Broker
*** Added option to specify "Client ID" in MQTT Publisher
*** Added functionality to select specific interface in Web Filter service
*** Allowed to select  FTP server subfolder in Traffic Logging service
*** Renamed various service master/slave naming convention in config files, package names and webUI to client/server
*** Added "Create static" button in Status -> Network -> LAN which bind DHCP lease for device
*** Updated Status -> Network -> Mobile page layout
*** Added bandwidth, provider in Status -> Network -> Mobile page
*** Added colors for signal strength values in Status -> Network -> Mobile page
*** Added frequency, pcid, mcc, mnc and LAC values in Status->Network->Mobile page
*** Refactored network type selection in Network -> Mobile -> General page
*** Serving cell information is not returned anymore when SIM card is not inserted
*** Changed default "Check interval" option value in Network -> Mobile -> SIM Switch page
*** Added button in a Scanned operators table which allows to add an operator to the operator list
*** Added search bar in Mobile Utilities -> SMS Utilities page
*** Added SMS sent and limit count to Network -> Mobile -> General page
*** Updated Mobile Signal graphs to show EC/IO and RSCP values when network type is 3G
*** Added DFS channel marking in Network -> Wireless
*** Show wireless MAC address even when interface is inactive in Status -> System page
*** Merged Multi AP configuration to wireless interface edit modal
*** Added automatic network switch to bridge if selected in Wireless configuration
*** Added default encryption for newly created wireless interfaces
*** Simplified "802.11r Fast Transition" configuration options in Wireless interface configuration
*** Updated "Change SIM" action type to display configured SIM target in I/O Juggler -> Actions overview page
** <b>System</b>
*** Updated kernel version to 5.4.251
*** Updated UCI version to 2021-10-22
*** Updated SSHFS version to 3.7.1
*** Updated FRR suite to 8.4.2
*** Updated cURL version to 8.2.0
*** Updated TCPdump version to 4.99.4
*** Updated C-ares version to 1.19.1
*** Updated curl version to 7.88.0
*** Updated iproute2 version to 5.19.0
*** Updated libubox package version to 2021-08-19
*** Added CVE patch CVE-2023-2650
*** Added additional firmware information in CLI prompt banner
*** Connection mode LED now blinks on data transfer
*** Changed "routername" to "devicename" in system config file
*** Made all clients get disconnected out once dropbear service is disabled
*** Improved firmware downgrade restrictions for certain regions
*** Device name is now displayed in browser tab when in WebUI login page
*** Added NF conntrack information in generated troubleshoot archive
 
* <b>Fix</b>
** <b>Network</b>
*** Fixed UDP Broadcast Relay service crashing on start without physical network device
*** Fixed SMS limit period migration
*** Fixed SMS limit size breaking various functionality
*** Fixed custom IPv6 DNS option not overriding default DNS from operator
*** Fixed an issue with blacklist and whitelist connection 
*** Fixed multipart SMS handling
*** Fixed wrong SIM state display when SIM is fully blocked
*** Fixed incorrect virginmobile APN MNC
*** Fixed mobile operator scanning fault when no mobile interfaces are active
*** Fixed mobile interfaces generating multiple events on mobile connection
*** Fixed PDU SMS parsing when operator provides user data header in single part SMS
*** Added scheduled data limit clear for inactive mobile interfaces
*** Fixed wrong or empty WAN state info
*** Fixed Wireless scanning issue with certain configuration
*** Fixed Wireless transmit power changing without user input after saving different country code
*** Fixed clients isolation functionality in Wireless
*** Fixed Wireless STA authentification failure in case of channel change
*** Fixed Multi AP startup when changing Multi AP configuration in Wireless
*** Fixed client connection to EAP Wireless network
*** Fixed LTE band 14 management with Quectel modems
*** Fixed connection tracking for main interface in Failover
** <b>Services</b>
*** Fixed reconnecting to inactive connections for Modbus Server service 
*** Fixed Modbus Client response after reboot write request
*** Fixed Modbus Server to show error when trying to get operator name without SIM
*** Updated Modbus Client to handle large numbers of schedule rules, when frequency is set to schedule (Daini
*** Fixed “Input” rule displaying incorrect and missing ports in Network -> Firewall -> Traffic Rules
*** Fixed WireGuard VPN endpoint resolving problem
*** Peer cache is no longer deleted when ZeroTier service is restarted
*** Fixed RMS data collection about the list of devices connected to WiFi
*** Fixed showing incorrect Internet state in RMS
*** Fixed WiFi client info display in RMS
*** Implemented error handling when device is blocked or unrecognized by RMS
*** Fixed L2TP client sometimes not adding routes on successful connection
*** Fixed NTP time sync with browser functionality in some edge cases
*** Fixed reinstalled packages" verification when device name is changed
*** Fixed an issue where signal query would return invalid value instead of error in case of no signal in MQTT Publisher service
*** Fixed OpenVPN firewall rule creation for both IPv4 and IPv6
*** Fixed OpenVPN server crash loop after changing authentification from TLS to Static Key
*** Fixed IPsec VPN connection problem with small lifetime values
*** Fixed IPsec "Default Route" not working when Flow Offloading is enabled
*** Fixed an issue where system directory could be used as a mount point in SSHFS service
*** Fixed IP block feature to unblock an OpenVPN IP address on successful authentification
*** Fixed package installation process bug when packages have different architecture names
*** Added "bearer token" authentication functionality in Dynamic DNS
*** Fixed MQTT Broker "local_port" option keep settings migration
*** Remove public keys when key-based authentication is disabled in Access Control
*** Fixed "Parity" field "Mark" and "Space" options being ignored in DNP3 Serial services
*** Corrected SNMP MIB file syntax according to standards
*** Fixed returned port count in SNMP
*** Fixed disabled CLI remote access taking up a session slot
*** Fixed received SMS messages parsing with trailing whitespaces
*** Fixed VPN status rule message text in SMS Utilities
** <b>WebUI</b>
*** Fixed empty events cards in Overview page when no content is available
*** Fixed modal form inputs not clearing upon closing after nested modal is saved
*** Fixed select menu closing when selecting custom option
*** Fixed multi select expanding table row when adding new values
*** Fixed global section caching after deleting a section in a table
*** Fixed unpredictable search logic in tables
*** Fixed interfaces reordering by metrics in Failover page
*** Removed ability to select ports on ICMP and ESP protocol in Failover page
*** Fixed wrong status when interface is disabled in Failover page
*** Fixed firewall zone and rule creation/deletion on VPN configuration creation/deletion
*** Fixed STP enabling issue in Interfaces
*** Fixed EIGRP status info in Dynamic Routes
*** Fixed issue with custom DHCP options where you could not have multiple values per rule
*** Fixed Routing/NAT Offloading section display in Network -> Firewall -> General Settings when device is not supported
*** Fixed SSH/HTTP/HTTPS/ICMP setting in Network -> Firewall -> Attack Prevention page
*** Fixed failing Firewall rules with united protocol formats
*** Fixed zone select component not closing options menu when selecting an option in Firewall pages
*** Fixed memory leak when cancelling file uploads on Chromium-based browser
*** Fixed group settings saving by removing deprecated ":section" routes in Administration -> User Settings -> System Users
*** Fixed allowing IDs above 247 in Modbus Client service
*** Fixed selecting SIM in Modbus Client service Alarms
*** Fixed Modbus Alarm telephone number limit
*** Fixed to show available options for test requests on error in Modbus Client service
*** Fixed Modbus Alarm I/O pin display values
*** Fixed issue when creating instance named "gre" does not show in GRE VPN
*** Remote endpoint field now allows underscore character in IPsec VPN
*** Fixed ZeroTier wrong service status display in Status -> Services
*** Fixed problems with L2TP/PPTP VPN firewall rules automatic creation
*** Fixed problem related to the enable/disable toggle in OpenVPN instance overview page
*** Added fixes for key-direction missing problem when uploading OpenVPN config file
*** Fixed login page read-only inputs after custom user logout
*** Fixed issue when double clicking firmware upgrade cancel button returned error
*** Fixed Package Manager prompt message to appear when package requires network restart
*** Fixed showing in queue packages when they contained special symbols in the Package Manager page
*** Fixed various visual Side Widget bugs
*** Fixed Data to Server DNP3 filter from flash display
*** Fixed incorrect source data displayed in Realtime Data -> Connections table
*** Fixed memory expansion confirmation prompt title
*** Fixed incorrect configuration saving in Hotspot 2.0 service
*** Disabled password hashing for new user creation in Hotspot service
*** Fixed Hotspot landing page themes saving bug
*** Fixed test email sending to more than one recipient in Events Reporting page
*** Fixed VLAN OID values in SNMP service
*** Output proper error message in case of hardware not being supported in Firmware Upgrade
*** Fixed being able to open side widget when user does not have read access
*** Fixed profile creation when current configuration is not present
*** Fixed wrong protocol data display in "Access control" page
*** Fixed LAN interfaces not showing up before WAN interfaces in Status -> Realtime Data -> Traffic
*** Changed representation of mobile cell ID from hexadecimal to integer type
*** Fixed Mobile Utilities "SMS forwarding to HTTP" URL generation
*** Fixed an issue where sometimes bands were not represented correctly on certain modems
*** Fixed provider information and IMSI value representation when SIM and modem cannot provide this information
*** Fixed mobile pages throwing 404 error when modem disconnects
*** Fixed WebUI showing mobile connection when no SIM card is inserted
*** Updated Network -> Wireless interface add and delete button visibility in basic mode
*** Fixed Wireless Multi AP incorrect SSID list after removal of an instance
*** Fixed MAC address filtering in Network -> Wireless page to list only connected WiFi devices
*** Fixed "Clear Collect Data" button logic to not clear overall mobile usage info
*** Fixed "Used data" showing large negative numbers for disabled mobile interfaces with Data Limit enabled
*** Fixed error when user has no write permissions in Speed Test page
** <b>System</b>
*** Patched CVE-2023-0386 vulnerability
*** Patched CVE-2023-0464 vulnerability
*** Patched CVE-2023-0465 vulnerability
*** Patched CVE-2023-2602 vulnerability
*** Patched CVE-2023-3772 vulnerability
*** Patched CVE-2023-4128 vulnerability
*** Patched CVE-2023-33476 vulnerability
*** Patched CVE-2023-28484 vulnerability
*** Patched CVE-2023-29469 vulnerability
*** Patched CVE-2023-31490 vulnerability
*** Patched CVE-2023-36369 vulnerability
*** Patched CVE-2023-48174 vulnerability
*** Delayed Custom Scripts execution on boot, after storage devices are mounted
*** Fixed Custom Scripts permissions after save
*** Changed certificate expiry calculation mechanism to fix Y2K38 bug
*** Fixed downloading of certificates that have a space in their name in Administration -> Certificates -> Certificates Manager
*** Fixed Events Log database rotation to prevent log partition space exhaustion
*** Fixed duplication and sorting of all events IDs in Events Log
*** Fixed FOTA crash when current hours is with leading 0
*** Fixed crontab job removal after disabling FOTA
*** Changed Mosquitto build options to not include cJSON library
*** Fixed device name resetting to default upon refresh in Administration

===<b>[[Media:RUT9_R_00.07.04.5_WEBUI.bin|RUT9_R_00.07.04.5]]</b> | 2023.07.24===

* <b>Improvements</b>
** <b>Network</b>
*** Improved MBN reselection algorithm when switching SIM
*** Improved SIM card change detection algorithm
*** Improved connection establishment speeds after sim switch
*** Added metric field support in BGP Route-maps page
** <b>WebUI</b>
*** Updated SIM slot labeling in modem card Overview page

* <b>Fix</b>
** <b>Network</b>
*** Fixed an issue with MBN selection when device is started for the first time
*** Fixed an issue where MBN activation would not be successful
*** Fixed service provider parsing when operator does not provide all fields for Quectel modems
*** Fixed a condition where mobile connection would not get established after a SIM switch
*** Fixed an issue with SIM switch causing connection problems
*** Fixed OpenVPN firewall zone migration when upgrading from legacy firmwares

===<b>RUT9_R_00.07.04.4</b> | 2023.06.26===
<b>Note:</b> Firmware version <i>RUT9_R_00.07.04.4</i> released on 2023.06.26 was removed due to an issue on certain modems with failing initial mobile connection after upgrading from <i>RUT9_R_00.07.02.5</i> or lower.
----
* <b>New</b>
** <b>Network</b>
*** Travelmate package for captive portal redirection

* <b>Improvements</b>
** <b>Network</b>
*** Improved mobile operator query methods and operator name parsing in various services
** <b>Services</b>
*** Improved UPNP lease file validation
** <b>System</b>
*** Device name is now displayed in browser tab when in login page

* <b>Fix</b>
** <b>Network</b>
*** Fixed a connection issue with bridge/passthrough mode when reconnecting ethernet cable
*** Fixed long mobile operator list parsing for whitelist/blacklist functionality
*** Patched CVE-2023-32233 vulnerability
*** Fixed an issue with Multi AP service remaining enabled when disabling
*** Fixed default networks in WAN firewall zone and possibility to add a network that is not yet created

** <b>Services</b>
*** Fixed connection establishment for RMS MQTT service
*** Implemented partial restart when connection with RMS server fails
*** Fixed device name resetting to default upon WebUI page refresh
*** Fixed being able to set device name without passing validations
*** Fixed WireGuard port change in firewall traffic rule when modifying instance port

===<b>[[Media:RUT9_R_00.07.04.3_WEBUI.bin|RUT9_R_00.07.04.3]]</b> | 2023.05.11===

* <b>Improvement</b>
** <b>System</b>
*** Removed SSH RSA key generation
*** Added SSH ECDSA and ED25519 key generation

* <b>Fix</b>
** <b>Network</b>
*** Fixed an issue with mobile when Call Utilities configuration is invalid
*** Fixed clients being unable to connect to wireless AP when multi AP configuration is empty
*** Fixed an issue where sometimes PIN/PUK code was deleted when performing a SIM switch
** <b>Services</b>
*** Fixed incorrect mobile data usage provided to RMS service
** <b>System</b>
*** Fixed an issue on bootloader web recovery hanging with certain firmware sizes

===<b>[[Media:RUT9_R_00.07.04.2_WEBUI.bin|RUT9_R_00.07.04.2]]</b> | 2023.04.04===

* <b>New</b>
** nftables support

* <b>Improvement</b>
** <b>Network</b>
*** Added PDP profile registry and LTE SMS format functions & management for the Verizon network
*** Improved SIM detection algorithm
*** Improved Multi-APN connection establishment time
** <b>WebUI</b>
*** Improved Overview page performance
** <b>System</b>
*** Changed hostname to router name
*** Updated OpenSSL to version 1.1.1t
*** Updated CA certificates to version 20211016
*** Updated libiwinfo to version 2022-08-19

* <b>Fix</b>
** <b>Network</b>
*** Fixed IPv4, IPv6 mobile connection restarts
*** Fixed operator scanning when mobile interface is disabled
*** Fixed data limit and tracking when software flow offloading is enabled
*** Added network reload call before bringing the mobile interface up
*** Fixed a segmentation fault issue which would occur occasionally when switching between SIM cards
*** Fixed Port-based VLAN ID calculation issue
*** Fixed PDP context authentication when using special characters
** <b>Services</b>
*** Fixed event text for configurable inputs/outputs on I/O Juggler
*** Fixed I/O PIN3 value not changing via MODBUS TCP
*** Added I/O status request error handling in various WebUI pages when the I/O service is booting up
*** Fixed wrong timezone returned issue in Operator Station Synchronization & Timezone Synchronization
*** Fixed MODBUS TCP Slave memory leak issue when requesting mobile parameters
*** Fixed OpenVPN enabling/disabling when using Password or TLS/Password authentication modes
*** Fixed OpenVPN keep alive setting migration issue
*** Fixed PPTP server name setting migration issue
*** Fixed RS485 2nd stop bit support
*** Fixed missing WebUI issue caused by Email Relay installation
*** Fixed NTP's Operator Station Synchronization memory leak issue
*** Fixed test email validation
** <b>System</b>
*** Fixed libcares vulnerability CVE-2022-4904
*** Fixed an issue with mobile metric setting migration from legacy FWs to RUTOS
*** Fixed frr vulnerability CVE-2022-37035
*** Removed ability for non root users to edit scripts that get executed as root

===<b>[[Media:RUT9_R_00.07.04.1_WEBUI.bin|RUT9_R_00.07.04.1]]</b> | 2023.03.24===

* <b>Fix</b>
** <b>Network</b>
*** Fixed Data Limit issue

===<b>[[Media:RUT9_R_00.07.04_WEBUI.bin|RUT9_R_00.07.04]]</b> | 2023.03.07===

* <b>Improvements</b>
** <b>WebUI</b>
*** Improved data persistence between page refreshes
*** Improved page navigation behavior
*** Improved redirect logic to open configuration edit modals
*** Updated the 'Status -> Mobile' page
*** Updated interface card in the Overview page
*** Separated Sent and Received data bars on the chart in the Mobile Usage page
** <b>Network</b>
*** Added an info message displayed when a faulty SIM card is inserted
*** Added ResIOT operator's APNs to the APN database
*** Improved mobile connection re-establishment after reboot
*** Improved mobile connection recovery in cases where it was lost unexpectedly
*** Improved 'Deny data roaming' operation when switching between operators
*** Changed default WiFi AP cipher to CCMP (AES)
*** Added the logging of MAC addresses rejected by a WiFi AP
** <b>Services</b>
*** Added MQTT support to I/O Juggler
*** Added support for new NMEA sentences: GARMC, GAGGA, GAGSA, GAVTG, GBGSV, GBGSA, GQGSV, GQGSA
*** Added an error message when trying to send an SMS from the 'Send Messages' page with no SIM card inserted
*** Changed the behavior of setting the 'Write to config' flag in the 'mobileoff' SMS rule
*** Added argument support for the 'Execute custom script' SMS rule
*** Added a frequency option 'schedule' Modbus Master
*** Added pagination to Events Reporting overview
*** Added limit to Events Reporting rule list
*** Added email logging for Events reporting
*** 'Sync with browser' button in the NTP page now also synchronizes the time zone
*** Added a limit of 30 for NTP instances
*** Made Networks selections in the 'Traffic Logging' page to display interface choices dynamically
*** Added "make before break" option to IPsec configuration
*** Added MODBUS TCP connection handling layer to MQTT-MODBUS Gateway
*** Improved MODBUS Master connection handling to reduce connection count
*** Updated modbus request error messages 
*** Added OpenVPN server ip block support
*** Added MQTT support for MODBUS Master alarms
*** Added the possibility to get the device's Ethernet port data via SNMP
*** Improved error messages in the Serial Utilities page
** <b>System</b>
*** Updated bash to version 5.1.16 
*** Added detailed FW update failure error message to Events Log
*** Improved firmware upload/validation error messages
*** Updated Turkish language support
*** Added protocol column to IP block page
*** Added "vpns.log" file to the Troubleshoot package
*** Added Wireguard tunnel information to the Troubleshoot package
*** Updated default admin group access rights
*** Updated DFOTA notification to show "More info" only when the update is forced

* <b>Fix</b>
** <b>WebUI</b>
*** Fixed MAC address showing on mobile interfaces
*** Fixed mobile cell ID displaying in hexadecimal
*** Fixed mobile data limit card creation in the Overview page
*** Fixed modem widget disappearing from the Overview page
*** Fixed Services page not displaying data after Thingworx package is installed
*** Added DNP3 to the 'Status > Services' page
** <b>Network</b>
*** Fixed interface priority change issue
*** Fixed a Custom Firewall Rule editing issue
*** Fixed DMZ configuration saving while it is disabled
*** Fixed Port Scan script execution failure
*** Fixed Firewall zone duplication issue
*** Fixed call function when VoLTE is disabled
*** Fixed VoLTE control when IMS is not enabled
*** Fixed mobile IPv6 IP checking when the device didn't get a correct IP address
*** Fixed APN authentication when using empty credentials
*** Fixed manual APN selection from list
*** Fixed disabled WiFi interface after factory reset
*** Fixed WiFi interface creation with SAE mixed encryption
** <b>Services</b>
*** Fixed disappearing GPS NMEA and HTTPS fields
*** Fixed unused NTRIP option deletion on NMEA source change
*** Fixed I/O Scheduler overlapping instances issue
*** Fixed Input/Output image pin colors
*** Fixed issue that causes ADC subscribers to receive notifications for when ACL is active
*** Fixed DNP3 serial master not working when Stop bits are set to 2
*** Fixed DNP3 requests not deleting along with instance
*** Fixed DNP3 memory leak occurring after spamming the test request button
*** Fixed Serial Over IP related Firewall rule setting
*** Fixed WiFi Hotspot landing page uploaded theme image display
*** Fixed WiFi Hotspot trial user deletion issue
*** Fixed WiFi Hotspot service crash when associated WiFi interface is not up
*** Fixed WiFi Hotspot password request by SMS
*** Fixed WiFi Scanner starting process when the WiFi interface is disabled
*** Added limitations on message size and quantity of email messages in Email to SMS
*** Fixed SMTP HELLO value parsing issue
*** Fixed SMS message window reset button
*** Fixed not being able to save empty 'Message text' field in Auto Reply
*** Fixed multi-part SMS concatenation
*** Fixed multi-part SMS processing
*** Fixed SMS error message on 'Mobile Data Reset' action
*** Fixed Data To Server JSON format %n, %N and %s flag issues 
*** Fixed Events Reporting email data clean
*** Fixed Events Reporting missing config selections
*** Fixed GRE Tunnel's 'Tunnel source' field validation when the source is custom
*** Fixed IPsec instance deletion after removing DMVPN package
*** Fixed IPSec migration via Backup file when DMVPN is configured
*** Fixed IPsec naming issue when the includes an equals sign
*** Fixed L2TP client to use correct interface on failover events
*** Fixed L2TP over IPsec connection dropping issue when connecting from a Windows client
*** Fixed MODBUS database size limiting issue 
*** Fixed MODBUS MQTT Gateway client ID input
*** Fixed MODBUS TCP Slave RSSI value
*** Fixed MODBUS test button returning errors when several non-connected devices are configured
*** Fixed NTP Etc/GMT+1 and Etc/GMT-1 time zones
*** Fixed OpenVPN password validation when no CA certificate is uploaded or 'custom' template is selected
*** Fixed OpenVPN Static Key configuration saving by making Static key upload required
*** Fixed OpenVPN TLS client creation issue while LAN is down
*** Fixed Package Manager displaying non-existent packages
*** Fixed Package Manager errors showing up after successful installations
*** Fixed Periodic Reboot entry duplication after a power cycle
*** Fixed PPTP 'Client to client' option not being applied after save
*** Fixed receiving excessive device state emails after a reboot is initialized over RMS
*** Fixed WebUI unavailability after unsuccessful package install
** <b>System</b>
*** Fixed vulnerabilities CVE-2022-3524, CVE-2022-3566, CVE-2022-3567, CVE-2022-39188, CVE-2022-45934, CVE-2022-47929
*** Fixed bash vulnerability CVE-2022-3715
*** Fixed CGI-IO file download vulnerability CVE-2022-38333
*** Fixed libxml2 vulnerability CVE-2022-40304
*** Fixed libcurl vulnerabilities CVE-2022-43551 and CVE-2022-43552
*** Fixed OpenVPN migration from legacy firmwares
*** Fixed an issue with OpenVPN TAP configuration migration from legacy FWs
*** Improved file upload logic
*** Fixed GPL firmware compilation with selected Tinc package
*** Fixed OpenVPN Static Key migration via keep settings issue
*** Fixed NTP time zone name setting migration when the name contains whitespaces
*** Fixed language setting issue
*** Fixed integer validation on industrial services
*** Fixed LED indications when PDP type is IPv6
*** Fixed issues with PDP type and SMS limit period migration via keep settings

===<b>[[Media:RUT9_R_00.07.03.4_WEBUI.bin|RUT9_R_00.07.03.4]]</b> | 2023.02.09===

* <b>Fix</b>
** <b>Network</b>
*** Changed generic modem restart method
*** Fixed mobile page VoLTE switching issues
*** Fixed CVE-2023-32349 vulnerability 
** <b>Services</b>
*** Sanitized tcpdump storage location
*** Fixed RS485 issue on devices from batch > 110
*** Removed OPOST stty output setting with legacy Over IP mode
** <b>System</b>
*** Fixed legacy backup upload
*** Fixed upgrade from legacy FW issue with keep settings

===<b>[[Media:RUT9_R_00.07.03.3_WEBUI.bin|RUT9_R_00.07.03.3]]</b> | 2023.01.25===

* <b>Fix</b>
** <b>Network</b>
*** Fixed disabled WiFi interface after factory reset

===<b>[[Media:RUT9_R_00.07.03.2_WEBUI.bin|RUT9_R_00.07.03.2]]</b> | 2023.01.13===

* <b>New</b>
** <b>System</b>
*** Japanese language

* <b>Improvements</b>
** <b>Network</b>
*** Optimized mobile netifd script installation

* <b>Fix</b>
** <b>Network</b>
*** Shortened modem hang monitor timeout
*** Fixed VLAN option setting when changing VLAN ID
** <b>Services</b>
*** Fixed RS485 not receiving data without transmiting prior

===<b>[[Media:RUT9_R_00.07.03.1_WEBUI.bin|RUT9_R_00.07.03.1]]</b> | 2023.01.03===

* <b>Improvements</b>
** <b>System</b>
*** Remove front-end certificate validation
** <b>Network</b>
*** Optimized mobile netifd script installation

* <b>Fix</b>
** <b>Network</b>
*** Fixed modem communication validation
*** Fixed connection establishment in IPv6 only mode
** <b>Services</b>
*** Fixed libxml2 vulnerability CVE-2022-40303
*** Fixed an IPsec Phase one & two setting migration issue{{#ifeq:{{{name}}}|RUT955|
*** Returned missing udp_client_count option to Over IP mode|}}
*** Fixed operator index in DNP3 outstation{{#ifeq:{{{name}}}|RUT955|<nowiki>; added GPS resubscribe; fixed segfault when GPS is enabled</nowiki>|}}
*** Fixed OpenVPN migration from legacy firmwares
*** Fixed not being able to create or edit PPTP instances after upgrading from legacy firmware{{#ifeq:{{{name}}}|RUT955|
*** Fixed an SD card formatting issue|}}
** <b>System</b>
*** Fixed JSON key parsing; keys can now be any printable character sequence
*** Fixed memory leak in 'session' module
** <b>WebUI</b>
*** Fixed file pretty name parsing

===<b>[[Media:RUT9_R_00.07.03_WEBUI.bin|RUT9_R_00.07.03]]</b> | 2022.12.16===

* <b>New</b>
** <b>Network</b>
*** Firewall DMZ page
** <b>Services</b>
*** Java package
*** SFTP server support
*** OPC UA client
*** NTRIP
*** Hotspot registered users management page
*** BACnet
*** Modbus Serial Slave
** <b>System</b>
*** Portuguese language
*** Spanish language
*** Turkish language
*** Email Relay package
** <b>WebUI</b>
*** New Web menu design

* <b>Improvements</b>
** <b>Network</b>
*** Updated modem handling, attachment, tracking and connection establishment processes
*** Added the possibility to select multiple ports in all firewall port fields
*** Added 'Match' traffic by type option to firewall traffic rules
*** Added DNS servers and routing table fields to the Wireguard page
*** Improved generating network topology
*** Moved Relayd, UDP Relay & Static Leases to the Interfaces menu section
*** Update Firewall Traffic Rules page with DSCP and MARK options
*** Added keepalive, holdtime and connect timers to BGP configuration
*** Added 'Use gateway metric' to network protocols web interface
*** Added more DHCPv6 client events to system log
*** Moved IP Filter rules from Modbus TCP Gateway and Over IP services to Firewall page
*** Added option to select subnet parameters in mobile Passthrough/Bridge modes 
*** Added WhereverSIM operator APN and fr.lebara.mobi APN to APN database
*** Added mobile connection state for IPv6
*** Added individual WiFi toggle support
*** Added error message when DFS channel is selected during scanning
*** Added switch back to default SIM after SIM Switch service disable
*** Added wget tracking method to WAN Failover
*** Added interface checks to remove inaccurate Failover events from the Event Log
** <b>Services</b>
*** Added format button for each USB device in USB Tools General page
*** Reduced waiting time during storage device setup for Memory Expansion
*** Optimized Storage Memory Expansion package size
*** Replaced ntfs-3g with kernel-mode driver
*** Added USB to Serial support for Modbus, MQTT Modbus Gateway, NTRIP, DNP3
*** Added CSP headers to Hotspot Landing Page
*** Added hotspot user script validation
*** Improved logging of disconnecting client devices
*** Added the possibility to switch profiles on GPS geofencing events
*** Added satellite count and accuracy columns to GPS Map page
*** Implemented Hotspot 'forget' method, which removes user from DB by MAC
*** Added execute custom script SMS Utilities rule
*** Added receiver and transceiver mode support to SMPP
*** Added timezone synchronization with GSM operator option to NTP Client
*** Updated Zerotier web interface
*** Added IPsec Flush connection option on tunnel initialization
*** Added MODBUS slave regfile validation
*** Added delay, number of timeouts, always reconnect options to MODBUS Master service
*** Added DMVPN Phase 2 and Phase 3 support
*** Added synchronization counting to NTP client
*** Expanded the data that is sent to the Cumulocity cloud with device log, mobile data usage nd GPS data
*** Added 'Unregister' button to RMS page
*** Added new data monitoring options to SNMP: configuration state of wireless, smart queues & VLANs
*** Updated Zerotier package to version 1.10.1
*** Added automatic package removal upon failed installation in Package Manager
*** Added option to describe custom routing table and MTU auto counting to Wireguard VPN
*** Added IP blocking to MQTT Bridge for failed login attempts to prevent bruteforce attacks
*** Updated sqm-scripts to version 1.5.1
*** Improved MODBUS Master service: added multiple datatypes, added multiple register reading for alarms
*** Added monthly reboot option to periodic reboot function
*** Added support for multiple custom option selection to SSTP configuration
*** Added PKCS12 certificate chain support to OpenVPN
*** Improved MQTT to support multiple port listening, multiple bridge connections, notification settings and added support for custom configuration file
*** Added QoS selection to MQTT Modbus Gateway
*** Improved RAM usage during upload and installation of packages via Package Manager 
*** Updated curl to version 7.86.0
*** Added brute-force prevention measures to Post/Get
*** Added automatic private and public key generation to Wireguard VPN
*** Added multiple Remote source IP support to IPsec
*** Added the possibility to configure multiple IPsec phase 1 and phase 2 proposals
*** Added functionality to rotate log file when log is saved to Flash memory
*** Improved performance while fetching packages on repeat visits to the Package Manager page
*** Added custom value calculation to ADC and ACL pins
*** Added MODBUS TCP Slave registers to store Analog Current Loop value
** <b>System</b>
*** Added a 'test mail' button to the Administration -> Recipients page
*** Added option to clear blocked IPs in the Access Control page after reboot
*** Updated Web Request-Response core logic
*** Added certificate validation to all services that support certificate upload
*** Updated URL protocol validations
*** Removed profile update requests during Save & apply
*** Optimized profile switching logic
** <b>WebUI</b>
*** Added an indication to the Interfaces page that displays when data limit is enabled
*** Added bootloader version to the Device section in the System page
*** Added configuration page shortcuts to Overview page widgets
*** Added tooltip in Overview that show free, used and total RAM/Flash values on mouse cursor hover
*** Updated network interfaces protocols web interface
*** Updated 404 page to include navigation menu

* <b>Fix</b>
** <b>Network</b>
*** Fixed CVE-2023-32350 vulnerability 
*** Fixed jumbo frames MTU issue
*** Added the 'Any' choice to source & destination IP address field in NAT rule edit
*** Fixed NHRP web interface issues
*** Fixed WAN interface configuration interfering with LAN
*** Fixed mdcollect memory leak issue
*** Fixed data limit not resetting properly
*** Fixed incorrect mobile data usage calculations for multiple day periods
*** Fixed an Auto APN 'Keep settings' issue
*** Fixed data counting after mobile data limit has been reached
*** Fixed mobile band not setting correctly on first try
*** Fixed incorrect data limit conditions causing unwanted SIM switches
*** Fixed Passthrough DHCP lease time setting
*** Fixed mobile bridge mode issue when no DNS servers are supplied
*** Added new Operator Lists instance name validations
*** Fixed mac80211 vulnerabilities CVE-2022-41674, CVE-2022-42719, CVE-2022-42720, CVE-2022-42721, CVE-2022-42722
*** Fixed wireless interfaces connections not reestablishing after disabling & enabling again
*** Fixed SIM Switch issue on newly created mobile interfaces
*** Fixed switch back to primary SIM rule disable when the default SIM is changed
*** Fixed incorrect SIM Switch behavior on low signal value
*** Fixed Wired WAN connectivity issue when Failover interfaces are disabled
*** Fixed Failover fallback issue
** <b>Services</b>
*** Fixed Hotspot landing page opening issue
*** Fixed Printer service starting issue
*** Fixed Printer service boot issues
*** Fixed DLNA service reload issues on USB drive insert/remove
*** Corrected serial connection baud rates
*** Fixed hostname resolution in 'Over IP' serial type
*** Fixed RS232/RS485 starting issues
*** Fixed relay state switching
*** Fixed Save & Apply issue with ADC/ACL type condition on I/O Juggler
*** Added I/O restart on configuration profile change
*** Fixed I/O voltage range display for power socket pins
*** Fixed SMNP OID for I/O state
*** Fixed I/O Juggler SMS text message Save & Apply issue
*** Fixed Hotspot connected user list maximum upload/download value limits
*** Fixed incorrect connected Hotspot user information in RMS JSON
*** Fixed Delay field in GPS HTTPS/HTTP Server Settings section 
*** Fixed AVL packet timestamp display 
*** Fixed issue that prevented GPS map display after clearing cache 
*** Removed unnecessary field from the Port Mirroring page
*** Fixed Events Reporting 'Changing to SIM1/SIM2' options
*** Fixed I/O analog voltage type display issue
*** Fixed Hotspot issues related to specific connected phones
*** Fixed Wireless AP enabled by MODBUS TCP Master not showing in Wireless clients
*** Fixed WiFi Scanner hostname validation issues
*** Fixed UCI SMS Rule return message to display new changes
*** Fixed DNP3 issues when asking for modem temperature
*** Fixed base64 encoding of SMS messages when forwarding to HTTP
*** Fixed SMS sending issues when using multiple APN
*** Added Gateway modem option to IP Block and WoL in SMS Rule edit
*** Fixed unblocking IP addresses with an SMS message
*** Fixed Mobile Utilities page not load properly on some occasions
*** Fixed dbus vulnerability CVE-2020-35512
*** Fixed dnsmasq vulnerability CVE-2022-0934
*** Fixed ext4 vulnerability CVE-2021-3428
*** Fixed kernel vulnerabilities CVE-2021-3669, CVE-2021-4203, CVE-2022-1353, CVE-2022-3435, CVE-2022-20008, CVE-2022-30594 
*** Fixed libxm12 vulnerability CVE-2022-29824 
*** Fixed Linux vulnerabilities CVE-2021-4148, CVE-2022-0480, CVE-2022-1055, CVE-2022-0886, CVE-2022-2663, CVE-2022-36879 for v5.4
*** Fixed MQTT DoS vulnerability CVE-2021-41039
*** Fixed privoxy vulnerability CVE-2021-44542
*** Fixed python3 vulnerability CVE-2022-42919
*** Fixed strongswan vulnerabilities CVE-2021-41991, CVE-2021-45079
*** Fixed uboot vulnerabilities CVE-2022-30552, CVE-2022-30790
*** Fixed switching between RMS connection types while the device is unregistered
*** Fixed reload issues in website blocking feature
*** Fixed IPsec PSK secret required field validation
*** Fixed bandwidth limiting after QoS is enabled for the first time
*** Fixed Dropbear issues when logging in over IPv6
*** Fixed Modbus status in Status -> Services page
*** Fixed Azure IoT Hub application issues when sending large volumes of data
*** Fixed Azure IoT Hub MQTT password validation
*** Fixed DMVPN configuration migration issue
*** Fixed DMVPN duplicate select options, added suffix to mobile interfaces to use IPv4
*** Fixed DMVPN IPsec connection issue
*** Fixed DMVPN mobile interface 'Keep settings' migration issue
*** Fixed Dynamic DNS long hostname text display issue
*** Fixed Events Reporting memory leak issue
*** Fixed Events Reporting not triggering after flipping an I/O slider
*** Fixed FOTA cron job not starting after factory reset
*** Fixed IPsec local firewall option parsing
*** Fixed IPsec tunnel creation issue when compatibility mode is used and the tunnel name contains an underscore
*** Fixed L2TP, PPTP, SSTP state display in the Status -> Services page
*** Fixed NTP pool hostname validation
*** Fixed OpenVPN certificate remove with Static key and TLS authentication methods
*** Fixed OpenVPN configuration saving issue when using HMAC key authentication
*** Fixed OpenVPN custom dev name transformation to correct format
*** Fixed OpenVPN device name setting logic when uploading config from file
*** Fixed OpenVPN instance status display
*** Fixed OpenVPN TAP (bridged) configuration detection
*** Fixed Qos configuration saving issue occurring after instance deletion
*** Fixed RMS JSON incorrect WAN state and IP information
*** Fixed RMS step access issue in the Setup Wizard page
*** Fixed SNMP issues after reboot while using a Hotspot
*** Fixed SNMP generating MIB files for devices in accordance with to their hardware
*** Fixed SNMP traps not working after SNMP is installed from server
*** Fixed SSTP client route creation issue
*** Fixed UPNP secure mode not turning off issue
*** Fixed Wireguard route to endpoint issue
*** Fixed manual package installation for queued packages
*** Fixed NAT Rules dependency from IPsec web instance
*** Returned usleep utility
*** Updated Australian and South African NordVPN server IP addresses
** <b>System</b>
*** Fixed Load Balancing, GRE, MQTT broker, IP alias, Operator list & SIM operator connection  migration from legacy firmwares
*** Fixed 3G LED animation issue
*** Fixed certificate signing issues
*** Fixed Telnet, CLI access blocking after max invalid tries
*** Fixed FW upgrade with 'Keep settings' while low free space is available
*** Fixed backup file duplication issue
*** Fixed network device handling in system
** <b>WebUI</b>
*** Fixed Hotspot interface display
*** Fixed side widget accessibility during first login
*** Fixed file upload issues
*** Fixed drag and drop issue in the Traffic Rules page
*** Fixed protocol display in the overview of the Interfaces page
*** Fixed blocked IP settings migration during a FW upgrade with the 'Keep settings'
*** Fixed login errors after browser tab restoration
*** Fixed redirect to newly set IP address after Interface configuration
*** Fixed firmware upgrade verify spinner not closing
*** Fixed an issue with file upload via drag and drop

===<b>[[Media:RUT9_R_00.07.02.7_WEBUI.bin|RUT9_R_00.07.02.7]]</b> | 2022.09.12===

* <b>Improvements:</b>
** Improved manual-auto connection mode

* <b>Fixes</b>
** Fixed AT command for SMS storage usage
** Fixed CVE-2022-1012 memory leak vulnerability
** Fixed CVE-2022-37434 kernel vulnerability
** Fixed GPS constellation settings
** Fixed interface option reset after VLAN ID change
** Removed memory leak on port events
** Fixed WiFi Scanner out of range crash when iterating collected data

===<b>[[Media:RUT9_R_00.07.02.6_WEBUI.bin|RUT9_R_00.07.02.6]]</b> | 2022.08.24===

* <b>Improvements:</b>
** Added 'home.vodafone.de' APN
** Improved stability of device information storage

* <b>Fixes:</b>
** Added SMSC type omitting when empty SMSC number parsed in SMS PDU mode
** Fixed Serial-symlink dmesg messages
** Fixed VoLTE management
** Fixed OpenVPN tls-auth and tls-crypt option names

===<b>[[Media:RUT9_R_00.07.02.5_WEBUI.bin|RUT9_R_00.07.02.5]]</b> | 2022.08.12===

* Improvements:
** Updated curl to version 7.83.1
** Updated firmware validation error messages
** Added multiple source IP address support to the Port Forwards page
** Increased custom APN Username & Password field maximum length to 64 symbols
** Added auto switch to modem's SMS storage when SIM card storage doesn't exist
** Improved mobile connection status handling
** Added CSP headers Hotspot WebUI landing page

* Fixes:
** Fixed CVE-2022-32205, CVE-2022-32206, CVE-2022-32207, CVE-2022-32208 curl vulnerabilities
** Fixed CVE-2022-30065 busybox vulnerability
** Fixed file upload path traversal
** Removed Data to Server limit to proccess less than 10 instances
** Fixed Data to Server 'out of memory' crashes when database is full or has a large amount of data
** Fixed OpenVPN dev setting logic
** Fixed OpenVPN updating from legacy issue that caused IPv6 not to work
** Fixed MAC and leasetime setting for Bridge & Passthrough modes
** Fixed modal tabs navigation when editing wireless interface with non-english languages

===<b>[[Media:RUT9_R_00.07.02.4_WEBUI.bin|RUT9_R_00.07.02.4]]</b> | 2022.07.20===

* Improvements:
** Added default password change warning message before firmware downgrade
** Extended time period for device to make connection to operator
** Reduced the number of modem reboots when changing mobile settings
** Reduced excessive log output when no SIM card is inserted
** Added modem restart prevention on modem init
** Added disable RPLMN option in the SIM section of the SIM card config

* Fixes:
** Fixed CVE-2022-2068 vulnerability
** Disabled autoconnect on stop-network call
** Fixed Hotspot login via landing page issue

===<b>[[Media:RUT9_R_00.07.02.3_WEBUI.bin|RUT9_R_00.07.02.3]]</b> | 2022.06.27===

* New Features:
** Port Mirroring

* Improvements:
** Added ping to DNS IPv6 support
** Added modem reset to default state after device FW upgrade
** Modem init now checks NVRAM sensitive commands before setting 
** GSM output was made consistent
** Updated FSTools package to version 2022-05-03
** Added security headers to web requests
** Added default VoLTE value
** Specified IP address family on operator control's ping to DNS feature

* Fixes:
** Fixed CVE-2019-12900 libbz2 vulnerability
** Fixed behavior of some gsmctl commands
** Fixed CVE-2022-23303 hostapd vulnerability 
** Fixed CVE-2022-29581 Linux kernel vulnerability
** Fixed CVE-2022-29458 ncurses vulnerability
** Fixed CVE-2022-1292 c_rehash script command injection vulnerability 
** Fixed band locking issue
** Fixed race condition for wireless configuration initialization

===<b>[[Media:RUT9_R_00.07.02.1_WEBUI.bin|RUT9_R_00.07.02.1]]</b> | 2022.06.06===

* Improvements:
** Improved GSM related messages in Troubleshoot logs

* Fixes:
** Fixed IGMP Proxy menu item not appearing after package installation
** Fixed default mobile network configuration generation
** Fixed MODBUS write requests and Mobile Utils option setting

===<b>[[Media:RUT9_R_00.07.02_WEBUI.bin|RUT9_R_00.07.02]]</b> | 2022.05.23===

* <b>New features</b>
** Overview side widget
** IGMP Proxy
** Privileged Access Management (PAM)
** AWS Greengrass support
** HTTPS certificate and key upload feature
** SSH public keys edit box
** License page
** DNP3 data for Data to Server

* <b>Improvements</b>
** Updated busybox to version: 1.34.1
** Updated curl to version 7.79.1
** Added iptables filter package for string filtering
** Added CHAP authentication for L2TP VPN
** Added IPv6 support for L2TPv3 VPN
** Added EAP-MSCHAPV2 authentication method for IPsec VPN
** Added IPv6 support to Auto Reboot
** Added 'Save to flash' and 'Test configuration' button to DNP3 configuration page
** Updated SNMP version 5.9.1
** Added OpenSSL authentication options to SNMPv3
** Added support for OSPF redistribution options and OSPF neighbors
** Added password field to BGP Peers page
** Extended BGP "AS" field validation to accept integers up to 4294967295
** Added "DHE+RSA" to OpenVPN cipher selections
** Increased OpenVPN max password length from 128 bytes to 512 bytes
** Made HMAC key direction initial value dependent on the role of the instance (client or server)
** Made HMAC key and HMAC authentication key upload fields required 
** Added DES to IPsec encryption algorithms selections
** Added special character support for CHAP secrets
** Added validation requirements for PPTP user list username field
** Added option to manually enter Public key in Wireguard configuration
** Made generating Wireguard  keys possible only while in auto mode
** Added Events Log database to troubleshoot archive
** Added RFC1918 filter field
** Added the possibility to unblock multiple blocked devices at once
** Added 'Port' column to blocked login attempts table
** Added Speedtest server refresh
** Updated Speedtest server list
** Added asterisk option to Site Blocking
** Added MD5 and SHA256 checksums to package validation page
** Changed certificate requirements to only require client key file if client certificate is used
** Added pagination and data retention between table pages
** Added pagination functionality to tables when there are more than 10 records
** Improved table sorting by saving user provided sort settings in the browser
** Improved drag and drop functionality
** Added the possibility to drag and drop files onto upload components
** Moved 'Root CA' from the 'Access Control' page to the 'Certificates' page
** Added 'Strict-Transport-Security' response header for HTTPS
** Added 'breadcrumbs' to modal windows
** Improved initial WebUI loading after login
** Added mobile bytes sent and bytes received SNMP OIDs
** Added mobile LED turn off feature ('System -> Administration'  page)
** Added 'iot.1nce.net', 'internet', 'VZWINTERNET' and Truphone APNs to APN database
** Updated mobile usage data point calculation logic
** Added the possibility to manually enter operator number
** Improved obtain mobile cell ID process
** Added modem restart if SIM card is removed during APN database fetching process
** Added unauthorized call logging
** Added space character support in SMS commands
** Disabled SMS modem storage configuration form when SIM is not inserted
** Changed SMS '%wi' parameter value to return IP address of any currently used WAN interface (not only wired)
** Added external modem SMS limit Overview card and widget
** Made in-use APNs visible next to mobile interface configurations (before clicking the 'Edit' button)
** Added duplicate value check for list configuration options
** Changed mobile card instance design
** Fixed 'Mobile Data usage reset' SMS rule
** Fixed the default state parameter of SMS list POST/GET command
** Added Hotspot configuration profiles
** Added local Hotspot user password hashing
** Added Hotspot password encoding option
** Improved Hotspot related firewall rule setting
** Improved WiFi Scanner enable switch to toggle 2 and 5 GHz instances separately
** Removed CHAP authentication protocol for WiFi Hotspots due to incompatibility with hashed passwords
** Added ubus support to Hotspot
** Changed default port name of WiFi devices for 'Topology state' Events Reporting rule
** Added AVL "Static Navigation" flag
** Added GSV parsing for NMEA collecting
** Added newline and GPS location actions to I/O Juggler
** Added error code 5 for reserved SAMBA user names
** Added Mobile data and SMS limit features for external modem
** Added I/O SNMP trap
** Added ISO 8601 time format to I/O Juggler's '%ts' parameter
** Added device name parameter '%pc' to I/O Juggler
** Added ACL or ADC SNMP trap notification on enter/exit/both
** Added ACL MQTT topic
** Added PPPoE VLAN priority support
** Made VRRP ping section dependent on main instance
** Added 'WAN to LAN' switch
** Added CRC verification support to MODBUS and RS232/RS485

* <b>Fixes</b>
** Fixed CVE-2021-20322, CVE-2021-4197, CVE-2022-1011, CVE-2022-0847 kernel vulnerabilities
** Fixed CVE-2022-28391 busybox vulnerability
** Fixed CVE-2018-16789 shellinabox vulnerability
** Fixed CVE-2021-44543, CVE-2021-44542 privoxy vulnerabilities
** Fixed CVE-2021-43618 GNU Multiple Precision Arithmetic Library vulnerability
** Fixed zlib backport security issue
** Fixed Wireguard firewall zone assignment
** Fixed queued packages disappearing from list after FW upgrade with keep settings
** Fixed error message display for multiple input validation rules
** Fixed incorrect DHCP validation range for start and limit fields
** Removed 'Bring up on boot' option from network interface configuration pages
** Fixed coma-separated DHCP options disappearing after save 
** Fixed exclude and listen interfaces
** Fixed 'Use broadcast flag' option saving
** Fixed firewall zone assignment when creating new interfaces
** Fixed OpenVPN 'Netmask' and 'IP address' field validations
** Fixed OpenVPN TAP configuration saving issue
** Fixed OpenVPN switching to TUN mode when uploading a configuration from file
** Fixed dynamic BGP route state display
** Fixed BGP peer enable in edit page
** Fixed issue when no L2TP client instance could be bound to IPsec
** Fixed firewall rule and zone behavior related to config section creation
** Added default value for L2TPv3 netmask, which is now written to config after save
** Fixed passthrough option saving to IPsec file
** Fixed DMVPN issue where instance configuration could not be saved
** Fixed Wireguard peer could not be saved issue
** Fixed NTP client time synchronization after factory reset
** Fixed device time display with selected time zone
** Fixed MODBUS TCP indexation missing bracket issue
** Fixed initial MODBUS TCP request count validation
** Fixed PIN 3/4 direction switching over MODBUS TCP
** Fixed MODBUS data to MQTT socket closing issue when connection fails
** Fixed MODBUS alarm configuration deletion
** Fixed DNP3 master not working after FW upgrade with 'keep settings'
** Fixed DNP outstation not returning error messages
** Added missing SNMP objects: mobile IP, data sent/received today
** Fixed MQTT Publisher 'Remote address' field validation
** Fixed long interface name support for Azure IoT Hub
** Increased maximum Azure IoT Hub 'Connection String' length to 4096 characters
** Fixed missing sent/received data issue
** Fixed URL input field length validation
** Fixed admin login issue after upload of backup from a device with older firmware versions
** Fixed MAC address formatting in Events reporting messages
** Fixed Events reporting DHCP lease message spam, when no new lease is added
** Fixed logging crashing after downloading Troubleshoot file
** Made Wake on LAN visible only on devices with Ethernet ports
** Fixed Traffic log file transfer to FTP server
** Fixed Web Filter service reloading after a host list file is uploaded
** Fixed access denied messages when sending JSON-RPC requests from root user
** Fixed error message display about duplicated intervals in Profile scheduler
** Fixed FW upgrade with 'keep settings' migration issue for Access Control's 'Fail count' and 'Device port' fields
** Corrected OSPF Routing card values, value positions and names
** Fixed global secret instances not being removed when there are no IPsec instances
** Fixed uploaded file remove icon not staying in position on hover
** Fixed Overview card collapse issue that made it unresponsive after too many clicks
** Removed WAN6 interface from the Overview page
** Fixed mobile IPv6 display in Events Reporting status messages
** Fixed Bridge mode when DNS2 is not available
** Fixed PAP/CHAP username and password fields not saving in interface edit window
** Fixed sending email without secure connection for providers that support such an option
** Fixed 'N/A' parameter showing up in SMS Utilities monitoring status message
** Fixed Call Utilities Events Log message for reboot rule 
** Fixed SMS command validation for no-authorization option
** Fixed MODBUS SMS alarms 'Enable' option saving
** Fixed running RMS with no SIM card inserted issue
** Fixed firmware available on server version checking issue
** Fixed CVE-2020-15078 openvpn vulnerability
** Fixed storage calculation for packages
** SMS Utilities: enhanced service security
** Fixed firmware deletion after leaving the page
** Fixed setup wizard redirect after LAN IP change
** Fixed various validation bugs, typos, option hints & alignments
** Fixed multiple IPv6 configuration field validations
** Fixed unnecessary SIM switch issue when Multi-APN is configured
** Fixed MODBUS TCP slave modem not starting after switching SIM cards
** Fixed PDP logging for Verizon operator
** Added multiwan support for Wireguard default route
** Fixed wireless signal strength display when no clients are connected
** Fixed loss of connectivity for clients when router is in STA+AP mode
** Added validation that prevents automatic connection to first unencrypted WiFi AP when using MULTI AP
** Fixed Wifi Scanner data not being stored in certain scenarios
** Fixed WiFi scanner not turning on after FW upgrade with 'keep settings'
** Fixed Hotspot user group limit not resetting on specified time
** Removed an RMS error message when no Hotspot users were created
** Fixed Hotspot landing page image upload issue
** Fixed restoring GPS HTTPS options after FW upgrade with 'keep settings'
** Fixed missing NMEA sentences
** Fixed NMEA cache sentence calculation
** Fixed 'outside/inside range' condition for AVL I/O Analog input trigger
** Fixed I/O Juggler external modem recognition
** Fixed flash driver reformatting after memory shrink
** Fixed DLNA package installation issue
** Changed Media Directories field to be required
** Fixed SAMBA fields value display
** Fixed relay output value display in I/O Juggler condition page
** Fixed I/O Juggler's WiFi rule not enabling or disabling WiFi interfaces
** Fixed I/O Juggler's double delete issue on I/O Juggler action and condition instances
** Fixed I/O Juggler's incorrect I/O status messages
** Fixed APN migration if APN was selected from APN list on legacy firmware
** Fixed RIP configuration migration from legacy firmware versions
** Fixed Wireguard interface status setting migration from legacy firmware versions
** Fixed default config options for SSH and Web access SMS Utilities rules
** Fixed POST/GET SMS listing by state
** Fixed automatic port open after RS232/RS485 Over IP server & bidirect configuration changes
** Fixed 'iostatus' SMS rule

===<b>[[Media:RUT9_R_00.07.01.4_WEBUI.bin|RUT9_R_00.07.01.4]]</b> | 2022.02.25===

* <b>Improvements</b>
** Increased Port Forwards rule max name length
** Added a new '%it' parameter for UTC time in ISO 8601 format to I/O Juggler
** Improved RS232 Port and Timeout validation

* <b>Fixes</b>
** Added missing bracket to the end of MODBUS messages
** Fixed preserving the contents of /etc/luci-uploads/ after FW upgrade with the 'Keep all settings' option
** Fixed IPv4-Gateway column showing empty values in the Status -> Routes page
** Fixed firewall extra option validation
** Fixed Hotspot enable button validation
** Removed invalid network interface selections from the "Network" dropdown in the Wireless interface configuration page
** Fixed 3G led animation issue
** Fixed Hotspot 2.0 status display in the System -> Status page
** Changed the logic of uploading files to the modem
** Fixed usage of custom headers in I/O Juggler HTTP action
** Fixed 'verify' option parsing for I/O Juggler
** Fixed OpenVPN server configuration with password authentication
** Fixed NTP interval length validation
** Fixed network interface enable after Drag & Drop
** Updated NTP client interval to 24h
** Fixed connection to whitelist carriers
** Fixed Passthrough mode when DHCP is disabled
** Fixed 'Deny data roaming' feature
** Fixed mobile blocking dependency on region
** Disabled Ping To DNS functionality when Bridge/Passthrough mode is enabled

===<b>[[Media:RUT9_R_00.07.01.2_WEBUI.bin|RUT9_R_00.07.01.2]]</b> | 2022.01.04===

* <b>New features</b>
** DFOTA modem upgrade system for Quectel modems

* <b>Improvements</b>
** Removed L2TP section title prefixes
** Added necessary/forced module firmware updates to handle AT&T network update

* <b>Fixes</b>
** Fixed IPSec crashing issue using mobile
** Fixed FW flashing when chip is in unknown state
** Fixed CPU usage percentage display in the Overview page
** Fixed FOTA timeout issue when server does not respond
** Fixed installation of backup packages
** Fixed mobile data limit display after profile change
** Fixed Bridge mode without multi-APN
** Fixed multi mobile interface checking
** Fixed error handling when the modem is not responding
** Prolonged autoconnect setting timeout

==='''RUT9_R_00.07.01.1''' | 2021.11.22===
<b>Note:</b> Firmware version RUT9_R_00.07.01.1 released on 2021.11.22 was removed due to an issue with IPsec tunnel while using mobile connection.
----
* <b>Fixes</b>
**Fixed image signature addition

===<b>RUT9_R_00.07.01</b> | 2021.11.18===
<b>Note:</b> Firmware version RUT9_R_00.07.01 released on 2021.11.18 was removed due to an issue with keep settings functionality.
----
* <b>New features</b>
** Load Balancing Rules
** 802.11s based wireless mesh network support
** Multiple Wireless AP feature
** Tinc VPN
** German language support
** Manual-Auto operator select

* <b>Improvements</b>
** Improved WebUI functionality when multiple browser tabs are open
** Updated base to OpenWrt version 21.02
** Updated kernel to version 5.4.141
** Updated mtd-utils to version 2.1.2 
** Updated busybox to version 1.33.1
** Updated ubus to version 2021-06-3
** Updated ubox to version 2020-10-25
** Updated rpcd to version 2021-03-11
** Updated opkg to version 2021-06-13
** Updated fstools to version 2021-01-04
** Updated wwan to version 2019-04-29
** Updated ethtool to version 5.10
** Updated uhttpd to version 2021-03-21
** Updated ppp to version 2020-10-03
** Updated odhcpd to version 2021-07-18
** Updated hostapd to version 2020-06-08
** Updated dropbear to version 2020.81
** Updated dnsmasq to version 2.85
** Updated netifd to version 2021-07-26
** Updated firewall3 to version 2021-03-23
** Updated libjson-c to version 0.15
** Updated libevent2 to version 2.1.12
** Updated mac80211 to version 5.10.42-1
** Updated wireless-regdb to version 2021.04.21
** Updated binutils to version 2.35.1
** Updated gdb to version 10.1
** Updated strace to version 5.10
** Updated trace-cmd to version 2.9.1
** Updated valgrind to version 3.16.1
** Updated ath10k-ct-firmware to version 2020-11-08
** Updated procd to version 2021-02-23
** Updated iw to version 5.9.8
** Updated iproute2 to version 5.11.0
** Updated iptables to version 1.8.7
** Updated nettle to version 3.6
** Updated libpcap to version 1.9.1 rel3
** Updated elfutils to version 0.180
** Updated cryptodev-linux to version 1.11
** Updated linux-firmware to version 20201118
** Updated util-linux to version 2.36.1
** Updated openwrt-keyring to version 2021-02-20
** Updated mtd to version rel26
** Updated fwtool to version 2019-11-12
** Updated ca-certificates to version 20210119
** Updated wireguard-tools to version 1.0.20210223
** Updated iwinfo to version 2021-04-30
** Updated ipset to version 7.6
** Updated gre to version rel12
** Updated wolfssl to version 4.7.0
** Updated ustream-ssl to version 2020-12-10
** Updated uclient to version 2021-05-14
** Updated readline to version 8.1
** Updated mbedtls to version 2.16.11
** Updated libusb to version 1.0.24
** Updated libunwind to version 1.5.0
** Updated libubox to version 2021-05-16
** Updated libnl-tiny to version 2020-08-05
** Updated libnftnl to version 1.1.8
** Updated libiconf-full to version 1.16
** Updated libbsd to version 0.10.0
** Updated gmp to version 6.2.1
** Updated ulogd to version rel6
** Updated sqm-scripts to version 1.5.0
** Updated ntpclient to version rel14
** Updated nmap to version 7.80
** Updated curl to version 7.77.0
** Updated zerotier to version 1.6.5
** Updated xtables-addons to version 3.13
** Updated xl2tpd to version 1.3.16
** Updated stunnel to version 5.59
** Updated strongswan to version 1.0.13
** Updated sstp-client to version 1.0.13
** Updated pptpd to version rel5
** Updated openvpn to version 2.5.3 rel2
** Updated ntpd to version rel3
** Updated net-snmp to version rel2
** Updated mosquitto to version 2.0.11
** Updated miniupnpd to version 2.2.1 rel 3
** Updated etherwake to version rel5
** Updated libzip to version 1.7.3
** Updated libgpg-error to version 1.39
** Updated glib2 to version 2.66.4
** Updated libnetfilter-conntrack to version 1.0.8
** Updated libnetfilter-log to version rel3
** Updated lzo to version rel4
** Updated nghttp2 to version 1.43.0
** Updated openvpn-easy-rsa to version 3.0.8 rel3
** Updated iperf to version rel2
** Updated iperf3 to version 3.10.1
** Updated e2fsprogs to version 1.45.6
** Updated fuse to version 2.9.9
** Updated udprelay to version 2020-02-26
** Updated qmicli to version 1.28.2
** Updated pcre to version 8.45
** Updated libsmpp34 to version 1.14.1
** Updated libiwinfo to version 2.1
** Added netifd library for additional information related to network interfaces
** Updated openssl to version 1.1.1l
** Updated privoxy to version 3.0.32
** Added ACL reload method for sessions
** Added 'Advertisement interval' field to the VRRP configuration window
** Added a PPTP-to-WAN Zone Forwarding rule when default route is enabled on PPTP client
** Added email user group validation for sendind test emails with Events reporting
** Added an event logging feature for Ping Reboot events
** Improved file/section deletion logic: now files are also deleted after deleting a related config section
** Improved package deletion logic
** Added the possibility to configure multiple reboot times in one Reboot Scheduler configuration instance
** Updated 'External system log server' field validation to accept IPv6 addresses 
** Added redirect to Overview page after login
** Added WebUI session timeout after user inactivity
** Added placeholder text to dropdown menus
** Improved multi-select design and functionality
** Added Unix timestamp, local ISO time, UTC time to Modbus
** Added info message when selected file cannot be uploaded
** Improved IPsec throughtput
** Added IPSec "Compatibility mode" configuration support
** Made SNMP 'Community name' option editable
** Added the option to delete configurations to the SMS Utilities 'UCI' rule
** Added 'hour', 'week day', 'month day' slelection options to SMS Limit configuration
** Added Lithuanian and Verizon APNs
** Added modem selection for the 'Send SMS' option in Auto Reboot settings
** Added the possibility to get total data usage value without specifying time interval via ubus
** Added return SIM count command
** Added new configuration options to the Failover feature
** Changed Failover page availability from Advanced only both advanced and basic
** Made Failover Interfaces table rows draggable when in 'Load Balancing' mode
** Changed Failover page 'Ratio' fields to a smaller size
** Added the possibility to allow multiple Hotspot users to log in with the same SMS OTP
** Added 'Duplicate passwords are not allowed' error message to Hotspot landing pages 
** Added 'Allow password duplicates' field to the Hotspot configuration page
** Improved wireless frequency option layout
** Added an indication to the GPS map when GPS service is disabled
** Added external modem support for the 'Mobile Usage' graph
** Added check to refuse firmware lower than 7.0 on devices with Micron flash
** Added I/O support to SNMP
** Removed ubus list method due to security reasons
** Added MODBUS "%I, %T, %S, %r, %n" support to MODBUS Data Sender
** Removed search engine site crawling
** Improved IPSec "Local/Remote source" validation
** Added Firewall "all" and "custom" protocol options
** Added Backup file size limit of 2 MB
** Improved basic/advanced mode changing
** Improved Wireguard "IP Addresses" field validation
** Added language download support from language selection section
** Added PPTP "Client to client" configuration support
** Made DDNS "username", "password", "host" fields optional
** Added SSTP "Default route" configuration support
** Added SMS Limit hour, week day and month day support
** Added Passthrough "Leasetime" and "Unit" configuration support
** Added Call Utilities "Active Timeout" configuration support
** Added support for PL2303GC serial to USB chip
** Added bgscan feature to wpa_supplicant
** Optimized Wireless device status information requests in all WebUI pages
** Added "Topology state" support to Events Reporting
** Added GPS AVL "Don't Contain Connection" and "Retry on Fail" configuration support

* <b>Fixes</b>
** Made RMS 'Connect' button disabled when a connection attempt is already in progress
** Added validation for TLS Clients 'Private network' option
** Fixed the validation range for MTU fields
** Fixed removing firmware image file after leaving the fimware upgrade page
** Fixed network selection list for Traffic Logging - added all available LAN networks
** Fixed DHCP Options validation
** Fixed configuration profile date display
** Fixed blank page after invalid URL in login page
** Fixed TR-069 related firewall rule loading
** Fixed remote subnet netmask validation issues for the GRE Tunnel configuration
** Fixed WebUI section toggle
** Fixed package installation modal layout
** Fixed current page values showing up in login page username field
** Fixed the possibility to create section with a name that is already in use in the same config file
** Fixed OpenVPN username and password deletion when deleting configuration instance
** Fixed session closing issue for the user whose password was just changed
** Updated MODBUS credential validation
** Updated MQTT credential validation
** Fixed DNS 'Rebind protection' setting when switch is disabled
** Updated libgcrypt to version 1.9.3 to fix CVE-2021-33560
** Fixed CVE-2021-33624, CVE-2021-29648 vulnerabilities
** Fixed DHCP 'Lease time' and 'Unit' option saving over the Setup Wizard LAN page
** Fixed Reboot Scheduler not removing crontab file after disabling the rule
** Fixed OpenVPN 'Extra options' field validation to allow a space character
** Added table drag and drop functionality to the Firewall's Traffic Rules page
** Fixed DNP3 Outstation crash caused by non-void function returning no value
** Fixed RMS 'Copy' button functionality
** Fixed gsmd deamon crashing after modem restart
** Fixed gsm memory leak
** Fixed WCDMA band names for MEIG modules
** Fixed SMS Gateway loading screen issue when sending an SMS message
** Fixed mobile data database error after upgrading firmware with the 'Keep settings' option
** Fixed rpcd memory leak issue
** Fixed network information gathering
** Fixed 3G LED not being active in 3G mode
** Fixed data limit accuracy issue
** Fixed SIM Switch back to default SIM crash loop when SIM1 is disabled
** Removed unused SIM Switch struct objects
** Fixed incorrect loading after saving Failover configuration
** Fixed escaping '#' symbol from hotspot username and password fields
** Fixed NTP GPS Synchronization swith to enable GPS service
** Fixed MODBUS Serial Master crash when requesting a 4-byte datatype from a 2-byte data payload
** Added a check if DNP3 is installed for 'Serial type' option
** Fixed Storage Memory Expansion issues related to upgrading from version 6.X with the 'Keep settings' option
** Patched CVE-2021-40528 vulnerability
** Patched CVE-2021-40490 vulnerability
** Patched CVE-2020-16120 vulnerability
** Fixed VLAN section creation
** Returned Interfaces "Port priority" option
** Fixed missing Content-Type header to initial WebUI response
** Fixed RIP information parsing in status page
** Fixed OpenVPN IPv6 netmask validation
** Fixed SNMP Trap Settings Host/IP field validation
** Fixed Cumulocity authentication reset
** Fixed Events Reporting rule saving

==='''[[Media:RUT9_R_00.07.00.2 WEBUI.bin|RUT9_R_00.07.00.2]]''' | 2021.10.19 ===

* <b>Fixes</b>
** Fixed NMEA sentence validation for Meig modems

==='''[[Media:RUT9_R_00.07.00 WEBUI.bin|RUT9_R_00.07.00]]''' | 2021.07.16 ===

* <b>New features</b>
** New, RUTX-like WebUI style
** New WebUI based on Vue.js 2.6.12
** RutOS updated to OpenWrt 19.07.7 base
** DNP3 Master and DNP3 Oustation
** 'Restore to user's defaults' SMS Utilities rule
** DHCP Relay AT command

* <b>Improvements</b>
** Updated firewall to release 3
** Updated kernel to version 4.14.221
** Updated uhttpd to version 2020-10-01
** Updated xtables-addons to release 9
** Updated mwan to version 2.8.14
** Updated pcre to version 8.44
** Updated curl to version 7.74
** Updated sqlite to version 3.33
** Updated ncurses to version 6.2
** Updated OpenSSL to version 1.1.1k
** Added full MODBUS register address expansion specifier for Data to Server
** Added full MODBUS register address legend
** Added Client ID option for the MQTT protocol in Data to Server
** Improved Data to Server sleeping accuracy
** Improved Data to Server username validation; now space is allowed
** Added firmware version OID to the SNMP service
** Added IP address family option field to the SNMP page
** Added SNMPv6 section to the SNMP Communities page
** Renamed the 'System -> Users' page to 'System -> System Users'
** Moved password changing option to the 'System -> System Users' page
** Switched to ar8216 driver
** Added IPsec XAUTH support
** Improved OpenVPN updown, init scripts to write info about instance in JSON
** Added AES-256-GCM encryption support to OpenVPN
** Added extra configuration parameters to DMVPN
** Added PSK conversion to DMVPN and single PSK types
** Improved Package Manager package installation, deletion and dependencies
** Improved Package Manager download process over FOTA
** Added new Input/Output values manageable over RMS
** Added IPv6 traffic logging
** Made 'Network -> Failover' and 'Network -> Interfaces' page data draggable on multiple browsers
** Added Input/Output Post/Get URL parameter t_time changing delay and time to seconds or miliseconds
** Added message storage management by config value
** Improved QMI error handling and status tracking
** Turned on modem in preinit for correct power-on sequence
** Added Post/Get feature to turn mobile data on/off
** Added the possibility to use 2gonly/3gonly/4gonly arguments for cellular service command alongside current 2g/3g/lte arguments
** Added "Phone number" and "Message" fields for "Send SMS" option
** Added "Host to ping from SIM1" and "Host to ping from SIM2" fields
** Added support for multiple USB to Serial adapters
** Added option to send SMS warning messages to Hotspot users authenticated with SMS OTP when specified amount of data is used up
** Added "send analog input" option to TAVL settings

* <b>Fixes</b>
** Added glib2 patch to fix CVE-2019-13012 vulnerability
** Added ntfs-3g patch to fix CVE-2019-9755 vulnerability
** Added WolfSSL patch to fix CVE-2021-3336 vulnerability
** Added Busybox patch to fix CVE-2018-1000500 vulnerability
** Added netifd, odhcp6c IPv6 routing loop on point-to-point links patches to fix CVE-2021-22161 vulnerability
** Fixed Android clients IPsec MTU/MSS size
** Fixed wrong IPsec DPD value saving
** Changed IPsec PSK maximum length to 128 symbols
** Fixed SSTP remaining up after package removal
** Fixed DMVPN crypto_proposal write to config
** Fixed I/O Juggler's SMS sending to correct group
** Fixed I/O Scheduler's relay state issue
** Added I/O direction check while changing IOs via I/O Post/Get
** Fixed float endianness mismatch on some devices MODBUS TCP Master, MODBUS Serial Master
** Fixed UPnP issue that caused config changes to apply only after service restart
** Fixed WebUI files caching when upgrading firmware
** Fixed WebUI date display format
** Fixed MODBUS returning incomplete MAC address data
** Fixed GPS time synchronization for DST regions
** Fixed depleting IPv6 RA timeout when the ISP doesn't send RA updates
** Added "Transaction timed out" error handling
** Fixed PPPOE connection loss when wrong session PADT packet arrives
** Added gcont object tracking and info update if this service is restarted
** Fixed default SMS storage
** Fixed SMS warning sending after Mobile Data Limit change
** Fixed DHCP relaying over mobile networks
** Changed PIN code maximum length to 8 symbols
** Fixed 'I/O status' message to include correct Input/Output name based on info in ubus ioman objects
** Fixed 'Over IP' serial type's UDP issue in client mode
** Fixed DLNA connections count total in statistics page
** Fixed WiFi Hotspot's Walled Garden issues
** Fixed WiFi Hotspot data logging issues
** Fixed P2P group information processing vulnerability in wpa_supplicant
** Added validation to Walled Garden Address list field