View source for Setting up external Radius server for RUTOS authentication

==Summary==
In this example, we will set up Teltonika Networks router to use a Radius server for SSH and/or WebUI authentication. We will use the ''freeradius'' package to set up a local Radius server on an Ubuntu virtual machine. Then we will create a new user. Lastly, we will test the configuration.

This is the idea of how a Radius server is used for RUTOS authentication:<br>
[[File:Networking freeradius lan principle diagram v1.png|border|class=tlt-border]]
==Topology used in this example==
[[File:Networking freeradius lan topology diagram v1.png|border|class=tlt-border]]
==Prerequisites==
*'''Router''' with the ability to install an additional package - PAM
*'''Ubuntu machine''' with the ability to host a local FreeRadius server
==Preparing Ubuntu machine==
====Installing the FreeRadius server====
Firstly, update the package source lists and upgrade the packages to their latest version:
 sudo apt update
 sudo apt upgrade

Next, install the FreeRadius package:
 sudo apt install freeradius
====Defining a client====
Client - a router that will use FreeRadius to authenticate WebUI and/or SSH users. 
In order to add/edit clients, we need to access the '''clients.conf''' file. Use your favorite text editor to edit it:
 sudo nano /etc/freeradius/3.0/clients.conf
For this example, we will add the following lines in order to accept any IP address as a client:
 client 0.0.0.0/0 {
     secret = demoscrt
     shortname = 0.0.0.0/0
 }

'''Note:''' a specific public IP of the client can be used instead of 0.0.0.0/0
====Defining user login credentials====
Before we create the user's login credentials, let's create an MD5 hash and use it instead of a clear text password. We will generate a hash value of '''demo123''' using the following command:
 echo -n demo123| md5sum | awk '{print $1}'

We will now define credentials for user '''demo'''. Use your favorite text editor to edit the file '''users''':
 sudo nano /etc/freeradius/3.0/users

Add the name of the user, MD5 hash value of its password, and a reply message:
 demo     MD5-Password:= "62cc2d8b4bf2d8728120d052163a77df"
        Reply-Message := "Hello, %{User-Name}"

Once these changes are made, start the FreeRadius service:
 sudo /etc/init.d/freeradius start
==Preparing router==
===Setting a static IP for the FreeRadius server===
Firstly, we will set a static IP for the Ubuntu machine running FreeRadius server. To do that you can use two methods.
====First method====
* Connect to the WebUI
* Navigate to '''Status → Network → LAN'''
* In the '''DHCP Leases section''' you should see Ubuntu machine's IP address
* Press [[File:Networking create static button from DHCP leases section v1.png]] near the instance to create a static IP lease
====Second method====
* Connect to the WebUI
* Navigate to '''Network → DHCP → Static Leases'''
* Add the Ubuntu machine's MAC, IP, and provide a description
[[File:Networking add static lease fw76 v1.png|border|class=tlt-border]]
* Press [[File:Networking save apply button fw76 v1.png]]
===Creating a new RUTOS user===
Now we will need to create a new user for SSH and/or WebUI access. To do that follow these steps:
* Go to '''System → Administration → User Settings → System Users''' section
* In the Add new user section fill in the user's login credentials.
You can specify your own custom role or choose one from the default roles. In this example, the admin role was chosen.<br>
[[File:Networking create new rutos user for freeradius fw76 v1.png|border|class=tlt-border]]<br>
'''Remember:''' use the '''same username as in''' FreeRadius '''users''' file. The password can be different, compared to the one in FreeRadius '''users''' file.
===PAM package installation===
Now we will need to install a PAM package, to do that follow these steps:
* Go to '''System → Package Manager → Packages'''
* '''Install''' the '''PAM''' package
===Radius server configuration===
Now we will set the FreeRadius server's information on the router
====For SSH authentication====
Firstly, we will need to enable SSH access for the created user. To do that, follow these steps:
* Go to '''System → Administration → User Settings → System Users''' section
* Press [[File:Networking edit button fw76 v1.png]] near the newly created user
* '''Enable''' the '''SSH access'''
* Press [[File:Networking save apply button fw76 v1.png]]
To enable PAM authentication for SSH, follow these steps:
* Go to '''System → Administration → Access Control → PAM''' section
* Press [[File:Networking edit button fw76 v1.png]] near the SSH instance
* '''Enable''' the '''instance'''
* Set '''module''' to '''RADIUS'''
* Set '''type''' to '''Required'''
* Set '''server''' to '''Ubuntu machine's IP'''
* Set '''secret''' to '''the one defined in''' the FreeRadius '''clients.conf''' file
* Leave '''Port''' and '''Timeout''' to their '''default''' values
[[File:Networking pam ssh freeradius config fw76 v1.png|border|class=tlt-border]]
* Press [[File:Networking save apply button fw76 v1.png]]
====For WebUI authentication====
To enable PAM authentication for WebUI, follow these steps:
* Go to '''System → Administration → Access Control → PAM''' section
* Press [[File:Networking edit button fw76 v1.png]] near the WebUI instance
* '''Enable''' the '''instance'''
* Set '''module''' to '''RADIUS'''
* Set '''type''' to '''Required'''
* In the '''Select users add the''' newly created '''user or enable''' PAM authentication '''for all users'''
* Set '''server''' to '''Ubuntu machine's IP'''
* Set '''secret''' to '''the one defined in''' the FreeRadius '''clients.conf''' file
* Leave '''Port''' and '''Timeout''' to their '''default''' values
[[File:Networking pam webui freeradius config fw76 v1.png|border|class=tlt-border]]
* Press [[File:Networking save apply button fw76 v1.png]]
==Testing configuration==
Now that we have the setup configured, we can test if the server properly authenticates the user.
To see authentication requests on the FreeRadius server side, follow these steps:
* Stop the FreeRadius service using this command:
 sudo /etc/init.d/freeradius stop
* Start the FreeRadius server in debug mode using this command:
 sudo freeradius -X
* Try connecting to the router's WebUI and/or SSH service

If the authentication is successful the server logs will contain these lines:
 Auth-Type PAP {
  pap: Login attempt with password
  pap: Comparing with "known-good" MD5-Password
  pap: User authenticated successfully
      [pap] = ok
    } # Auth-Type PAP = ok

If the authentication is unsuccessful the server logs will contain these lines:
 Auth-Type PAP {
  pap: Login attempt with password
  pap: Comparing with "known-good" MD5-Password
  pap: ERROR: MD5 digest does not match "known good" digest
  pap: Passwords don't match
      [pap] = reject
    } # Auth-Type PAP = reject
[[Category:Router control and monitoring]]