View source for TRB245 Firmware Downloads

{{Template: Networking_rutos_firmware_downloads
<!------------------------DEVICE----------------------->
| name         = TRB245
| series       = TRB2
}}

==Changelog==
<!--NEW_FW-->
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.9.3/TRB2/TRB2_R_00.07.09.3_WEBUI.bin TRB2_R_00.07.09.3]</span></b> | 2024.09.27===
* <b>Fix</b>
** <b>Network</b>
*** Multi WAN: fixed ipsets not getting deleted correctly when Multi WAN gets restarted
----
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.9.1/TRB2/TRB2_R_00.07.09.1_WEBUI.bin TRB2_R_00.07.09.1]</span></b> | 2024.09.13===
* <b>Improvements</b>
** <b>Services</b>
*** Python3: updated version to 3.11.7
* <b>Fix</b>
** <b>Network</b>
*** Mobile: fixed eSIM profile config generation
----
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.9/TRB2/TRB2_R_00.07.09_WEBUI.bin TRB2_R_00.07.09]</span></b> | 2024.09.03===
* <b>New</b>
** <b>Network</b>
*** Firewall: added ability to configure NAT rule action
*** Firewall: added additional TTL target for firewall rules
*** Mobile: disabled GEA1/GEA2 and enabled GEA3/GEA4 ciphering algorithms for EC200, EC25 and SLM750 modems
*** Mobile: added "datamobile.ag" APN for "Datamobile.ag" operator to APN database
*** Mobile: added "m2m.ajrinternet.eu" APN for "Airinternet" operator to APN database
*** Mobile: added "wbdata" APN for "Webbing" operator to APN database
*** Mobile: added "inetd.vodafone.iot" APN for "Vodafone" operator to APN database
*** Mobile: added "asm" APN for "ASM" operator to APN database
*** Realtime Traffic: added historical traffic charts
** <b>Services</b>
*** Events Reporting: added new firmware version notification event
*** SNMP: added Multiwan data module
** <b>System</b>
*** WebUI: added notifications menu
* <b>Improvements</b>
** <b>Network</b>
*** Mobile: improved network bring up after operator scan
*** Mobile: updated bands selection to include band number and frequency
*** Mobile: improved SIM card notifications to get removed when SIM card state or active SIM changes
*** Mobile: improved modem update notifications to show modem name
*** Mobile: removed the USSD feature from the data-only modems
*** Realtime Traffic: improved chart styles
** <b>Services</b>
*** Call Utilities: added check if the number is blocked before doing action
*** Data to Server: added warning messages about insecure certificates for http_certfile and mqtt_certfile options in API and WebUI
*** DLMS: added SHA256 authentication
*** DLMS: improved COSEM group enable validation
*** GRE: reduced GRE keepalive packet buffer size
*** Input/Output: the timeout for ADC value retrieval has been reduced from 20 seconds to 500 milliseconds. In the event of a timeout, the last cached valid value will now be returned
*** IPsec: added support for route based tunnel
*** L2TP: added field for custom options
*** SMPP: added timeout option
*** Web Filter: added hostname count message after successful file upload
** <b>System</b>
*** Access Control: improved system user's access control rules logic
*** Access Control: added option to disable password auth for the root user
*** Administration: improved write/read access control options display to match meniu path style
*** Backup: improved backup page by splitting it into backup and reset settings page
*** Update Firmware: changed firmware update log to include firmware version
*** WebUI: updated firmware and backup verification pages design
*** WebUI: improved global alerts display
*** WebUI: added confirmation prompt for disabling service in side widget
*** Kernel: updated version to 5.4.279
* <b>Fix</b>
** <b>Network</b>
*** Devices: fixed configured VLAN 0 device cannot be selected in interface physical settings configuration
*** Mobile: fixed data limit widget to show used data for inactive interface
*** Mobile: fixed Bridge/Passthrough modes for routed networks
*** Mobile: fixed incorrect date values when setting SMS limit
*** Mobile: fixed SMS used data header counter
*** Mobile: fixed the issue where the PUK event was not displayed when the SIM PIN was blocked
*** Mobile: fixed uqmi start-network authentication issue
*** Mobile: fixed modem info not being filled on devices with more than one modem
*** Mobile: fixed mobile data limit to calculate correct used limits when using ipv4 and ipv6 simultaneously
*** Mobile: fixed USSD over IMS error handling
*** Mobile: fixed an issue where the interface could hang if the modem was busy
*** Network: fixed incorrect date values when setting data limit
** <b>Services</b>
*** Azure IoT Hub: fixed the Azure IoT Hub deprecated endpoint to create Data to Server sections
*** Azure IoT Hub: fixed the Azure IoT Hub deprecated endpoint so that it does not create sections in GET request
*** Azure IoT Hub: fixed the deletion of Data to Server sections when an Azure IoT Hub section is deleted through the deprecated endpoint
*** DLMS: fixed OBIS code validation
*** GPS: fixed an issue where a firmware update with keep settings would remove existing hosts
*** GPS: fixed NMEA forwarding when RMC/GGA were not synchronized when using same interval
*** Input/Output: added I/O juggler reload when I/O pin direction is changed
*** OPC UA Client: fixed TCL file upload
*** OPC UA Server: fixed TCL file upload
*** OPC UA Server: fixed configuration migration
*** OpenVPN: fixed default firewall zone for tap interfaces
*** SNMP: fixed negative GPS latitude display
*** SNMP: fixed TELTONIKA-MIB wireless module crash
*** SNMP: fixed mobile network state display
*** SNMP: fixed default hssDwLimit, hssUpLimit, hssDwBandwidth and hssUpBandwidth values
** <b>System</b>
*** API Core: fixed file deletion
*** Boot: fixed Teltonika logo in httpd recovery page when using Firefox
*** Package Restore: fixed automatic package re-installation after firmware upgrade
*** Troubleshoot: fixed troubleshoot not including all the log files when log to flash is enabled
*** User Settings: fixed page to show groups and users if the user has been granted access
*** WebUI: fixed overview page to display active wireless (WLAN) clients
* <b>CVE Patches</b>
** CVE-2021-32292
** CVE-2022-40617
** CVE-2023-49441
** CVE-2024-0397
** CVE-2024-3596
** CVE-2024-5535
** CVE-2024-8088
** CVE-2024-26669
** CVE-2024-26739
** CVE-2024-36901
----
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.8.2/TRB2/TRB2_R_00.07.08.2_WEBUI.bin TRB2_R_00.07.08.2]</span></b> | 2024.08.12===
* <b>Fix</b>
** <b>System</b>
*** Update Firmware: fixed inconsistent firmware download from FOTA
----
===<b>TRB2_R_00.07.08.1</b> | 2024.08.06===
<b>Note:</b> This firmware version was removed due to an issue with FOTA firmware download.
* <b>Improvements</b>
** <b>Network</b>
*** Mobile: improved firmware downgrade validation for Quectel modules
** <b>Services</b>
*** Zerotier: updated version to 1.14.0
* <b>Fix</b>
** <b>Network</b>
*** Mobile: fixed an issue where in some cases mobile network interfaces would not be brought down properly
*** Mobile: fixed memory fault while allowlist and denied data roaming enabled
*** Mobile: fixed illegal instruction fault on modem control services
*** Network: fixed default route not being added for PPPoE connections
** <b>Services</b>
*** Modbus TCP over Serial Gateway: fixed serial connection not working after reboot
*** OPC UA Client: fixed connections not being closed after using testing functionality
** <b>System</b>
*** WebUI: fixed SDK WebUI package compilation
----
===<b>TRB2_R_00.07.08</b> | 2024.07.18===
<b>Note:</b> This firmware version was removed due to an issue with FOTA firmware download.
* <b>New</b>
** <b>Network</b>
*** DNS: added inherited server status to configuration page
*** HTTPS DNS Proxy: added new HTTPS DNS Proxy package to package manager
*** Mobile: added SIM card lock/unlock functionality in Mobile->Utilities page
*** Mobile: added SIM card PIN change functionality in Mobile->Utilities page
*** Mobile: added new Mobile->Limits page which shows information and allows to configure Data and SMS limits
*** Mobile: added DFOTA support for RG520N modems
*** Mobile: added nr-arfcn display to mobile status page
*** Mobile: added dfota support for devices with RG520N-EB modem
** <b>Services</b>
*** Data to Server: added 'Lua script' data input
*** Input/Output: added ability to configure gpio debounce timer and changed default gpio debounce timer value from 200 ms to 10 ms
*** IPsec: added initial XFRM support
*** MQTT Modbus Gateway: added JSON message type format
*** OpenVPN: added DCO support
** <b>System</b>
*** API Core: added option to configure api session timeout
*** Certificates: added "Let's encrypt" certificate generation
*** PAM: added RADIUS external user support
*** UI Core: added data analytics support
*** Update Firmware: added warning message about device being temporarily unreachable on firmware update
* <b>Improvements</b>
** <b>Network</b>
*** DNS: separated field "DNS forwardings" into two: one for simple server forwarding other for domain-specific
*** DNS: moved "DNS Forwardings", "Listen interfaces", "Exclude interfaces", "Local service only", options to advanced tab
*** Firewall: improved protocol field in all firewall pages by making that "All" value would be mutually exclusive with any other value
*** Mobile: improved IMS context initialization
*** Mobile: updated SMS memory management for multipart SMS
*** Mobile: added error message when attempting to enable the SIM switch without any criteria set
*** Mobile: added informative message in SIM switch page when Data/SMS limit criteria are enabled but the limits themselves are not set up
*** Mobile: moved operator list allowlist/blocklist selection to Network selection page
*** Mobile: refactored Scanned operators modal, added repeat scan button
*** Mobile: added ability to view previously scanned operators in Network selection and Operator lists pages
*** Mobile: added ability to edit operator list name and initiate scans for operators in Operator lists page
*** Mobile: updated operator code field list to include APNs from the APN database in Operator lists page
*** Mobile: split Mobile->General page into three pages: General, Connection and Utilities pages
*** Mobile: added mobile interface with highest priority APN configuration in Mobile->General page
*** Mobile: added icons with hints which show SIM card, operator, data connection statuses in Mobile->General page
*** Mobile: moved Mobile data limit section to a tab in WAN page
*** Mobile: added informative message in WAN page to indicate whether the connection will be made using APN from APN database, empty or custom APN
*** Mobile: improved logging of ping error messages
*** Mobile: added 5G SA/NSA mode selection
*** Mobile: improved modem updater to stop ping reboot service while update is in progress
*** Mobile: improved the handling of denied messages upon SIM switch
*** Mobile: added notification when a multi-IMSI SIM card is using Auto APN
*** Mobile: added validation to not allow passthrough and bridge mode when one already exists
*** Mobile: improved safeguards for modem services startup
*** Mobile: improved modem update status display
*** Mobile: added corrupted mobile statistics database restoration functionallity
*** Mobile: improved setting of IPv4 and IPv6 types inside the modules
*** Mobile: improved provider name parsing for SLM750 modem
*** Multi WAN: improved interface status representation when using load balancing
*** Network: added more options for "IPv6 assignment length" field
** <b>Services</b>
*** Azure IoT Hub: added DPS symmetric key attestation support
*** Azure IoT Hub: added Direct Method support
*** Azure IoT Hub: added Plug and Play integration
*** Azure IoT Hub: added link to "Data to Server" page
*** Data to Server: added support for multiple filters
*** Data to Server: improved HTTP output hostname definition with automatic protocol specification in URL
*** Data to Server: improved MQTT input connection handling
*** DNP3 Client: added option to enable/disable service
*** Dynamic DNS: added Lookup hostnames support
*** GPS: added send empty feature, which sends zeroed location data after specified GNSS loss timeout
*** GRE: increased Inbound and Outbound key limit to 4294967295
*** Input/Output: added custom name support in I/O status page
*** IPsec: added certificate warning message
*** Mobile Utilities: added interface option to sms_utils cellular command
*** Mobile Utilities: improved error log message
*** Mobile Utilities: improved naming of I/O pins in initial I/O status rule
*** Mobile Utilities: sms utilities authentication brute force prevention
*** Modbus Server: added mobile last month and last week usage registers
*** Modem Control: disabled canonical mode by default for partial mode. Now full/partial mode input from serial port works the same way
*** Mosquitto: added large package size check for MQTT clients
*** MQTT Modbus Gateway: improved mosquitto reconnect time and service will try to recover few times before exiting
*** MQTT Publisher: improved MQTT connection handling
*** OPC UA Client: added security modes
*** OPC UA Server: added security modes
*** OPC UA Server: added service status display
*** OpenVPN: added support for decrypting private key when uploading a configuration file
*** OpenVPN: improved instance status state
*** OpenVPN: added options to specify an IP address pool for dynamic assignment to clients
*** Over IP: added label to show how many servers a client is connected to
*** Over IP: connect on data feature will not disconnect immediately after data transfer but wait for inactivity timeout
*** Over IP: increased TLS handshake timeout to 10 seconds
*** SMPP: added brute-force prevention
*** SMPP: added TLS/SSL support
*** SMS Utilities: added security warning in "Authorization method" configuration
*** SNMP: changed interface module OID structure
*** SNMP: improved User-based Security Model (USM) brute force attack prevention measures
*** Stunnel: improved global instance settings dependencies
*** emailrelay: updated version to 2.4.1
*** OpenVPN: updated version to 2.6.9
*** stunnel: updated version to 5.72
** <b>System</b>
*** Access Control: added certificate key length warnings
*** Access Control: adjusted access control when all pages are blocked
*** Access Control: added certificate file download for CLI to work on all browsers
*** API Core: implemented functionality to include warning messages for vulnerable certificates
*** Boot: improved modem startup reliability
*** Package Manager: added multi package actions
*** Package Manager: added status filter
*** Package Manager: moved package upload action to main page
*** Package Manager: added links to installed packages pages
*** Package Manager: refactored "Packages" page
*** Package Manager: updated opkg repository link to use https
*** RutOS: improved GPL example page to align with new software architecture
*** Troubleshoot: refactored Modem debug section to display responses in single field, added clear button to remove received responses
*** Troubleshoot: added support for multiple syslog servers
*** UI Core: added additional message with IP address to loading screen for scenarios when redirect to different IP address happens
*** UI Core: added toast message hiding when text is too long
*** Update Firmware: added 'Firmware version' data in screen after firmware upload
*** WebUI: added functionality to cancel loading screen if it takes 30 or more seconds
*** WebUI: removed all ubus method calls from webui
*** WebUI: improved language caching
*** WebUI: added password generator for first login modal
*** WebUI: added sticky position to side menu
*** WebUI: added default password hint to login error message
*** WebUI: added warning messages for low-security certificates
*** Kernel: updated version to 5.4.276
*** libexpat: updated version to 2.6.2
*** SSL/TLS: updated version to 3.0.14
*** vue: updated version to 3.4
* <b>Fix</b>
** <b>Network</b>
*** Devices: fixed missing API devices status endpoint permission
*** DHCP: fixed "DHCP option" allow empty input value
*** DHCP: fixed IPv4 leases being not correctly shown when NTP synchronizes time
*** DHCP: fixed DHCP error that occurred after changing the subnet of the LAN IP address in the setup wizard
*** Dynamic routes: fixed duplicated external routes cards
*** Firewall: fixed firewall zone validation when adding interfaces
*** Mobile: fixed low signal reconnect being available on modems where it is not supported
*** Mobile: fixed gsmctl -E output to return only json values
*** Mobile: fixed Carrier Aggregation signal strength info
*** Mobile: fixed wrong mobile data limit used data format for sms messages
*** Mobile: fixed duplicate data connection event reporting
*** Mobile: fixed an issue where low signal notifications were displayed without a SIM card
*** Mobile: fixed modem serial number acquisition after modem reboot
*** Mobile: fixed an issue when 4G-only network type selection may have resulted in a slower connection to the operator
*** Mobile: fixed issue where USSD responses were returned in HEX format instead of text format for EC200A module
*** Mobile: fixed issue where DHCP filter was not set correctly for RG501Q
*** Mobile: fixed an issue where the wrong IP address was used after a DFOTA upgrade
*** Network: fixed overriding MAC address for interfaces that are bridged
*** Network: fixed not getting IP address when switching LAN to WAN
*** Realtime Traffic: fixed mobile usage by week day translation by device language
*** SQM: fixed missing PPP mobile device selection in SQM configuration
** <b>Services</b>
*** BACnet: fixed incorrect BACnet IP port used for sending responses
*** BGP: fixed route map sequence going out of range
*** BGP: fixed listen range field allowing multiple entries
*** Call Utilities: fixed table header switch to be disabled if no rules were created
*** DLMS: fixed DLMS test response format
*** DLMS: fixed COSEM group validation
*** DLMS: fixed API POST error for /dlms/devices/config endpoint
*** DLMS: fixed serial connection not working after reboot
*** DNP3 Client: fixed to allow reading objects past 255 index
*** DNP3 Client: fixed incorrect hints
*** DNP3 Outstation: fixed serial outstation starting issues
*** GPS: fixed GPS start constellations issue
*** GPS: fixed an issue where NMEA sentences were parsed incorrectly at midnight, resulting in a 24-hour time discrepancy
*** GPS: fixed gpsctl datetime parameter
*** GPS: fixed issue where DPO would not get disabled if GPS is started without DPO
*** GPS: fixed AVL TAVL rule signal value issue
*** GPS: fixed default AVL rule issue where I/O would be ignored by default
*** GPS: fixed BeiDou and QZSS seperation in PQGSV sentences
*** GPS: fixed NMEA sentences reading in NMEA collecting
*** I/O Juggler: fixed improper dout action config handling
*** I/O Juggler: updated profile change action
*** Input/Output: allow unselecting all Post/Get access methods
*** IPsec: fixed connectivity issues when using WAN failover
*** IPsec: fixed the instance status when the local firewall option is disabled
*** Ledman: fixed issue when after some time network type LED starts blinking
*** Modbus Client: fixed test request option validation
*** Modbus Client: fixed alarm output action display values
*** Modbus Client: fixed incorrect period hint
*** Modbus Server: fixed APN register not clearing APN
*** Modbus Server: fixed 148 and 164 modbus registers
*** Modbus Server: fixed incorrect hints
*** Modem Control: fixed API POST request validation
*** NTRIP: fixed NTRIP NMEA generation timestamp and coordinates errors
*** NTRIP: fixed configuration reading with several instances added
*** OPC UA Server: fixed not starting while modem is down
*** OpenVPN: fixed displaying imported files from device
*** OpenVPN: fixed the private key decryption for cases when a password is used
*** OpenVPN: fixed data cipher migration
*** Over IP: fixed issue where serial device does not recover after modem reboot
*** Over IP: fixed connect on data initiating TCP connection after few data transfers
*** Overview: fixed issue when devices without WiFi send additional request without data
*** SMPP: fixed username bypass problem
*** SMPP: fixed password validation
*** SMS Gateway: fixed SMS to Email recipient formatting according to RFC5322
*** SNMP: fixed GSM mSignal OID value type
*** SNMP: fixed GSM module memory leaks
*** SSTP: fixed functionality when the default route option is not enabled
*** Web Filter: fixed whitelist not working for some hosts when using IPv6
** <b>System</b>
*** Administration: fixed repeated validation on cleared inputs and added validation when new password matches the old one
*** API Core: fixed API method validation during upload action
*** API Core: fixed error messages for POST method
*** API Core: fixed option list validation
*** Boot: fixed factory settings restore (firstboot) not deleting hidden files
*** Events Log: fixed refresh button in event log table
*** IP Block: fixed adding MAC addresses back to whitelist when unblocking all of them
*** Recipients: made phone number field required
*** Setup Wizard: fixed lan ip step not changing ip address
*** Troubleshoot: fixed system log and kernel log buttons to be enabled with read only rights
*** Update Firmware: fixed misleading "Firmware version" status of "N/A" to "FOTA service is disabled" when FOTA is disabled
*** Update Firmware: fixed issue when infinite spinner appears after updating device firmware from server without having internet connection
* <b>CVE Patches</b>
** Patched CVE-2023-52425
** Patched CVE-2023-52530
** Patched CVE-2024-25629
** Patched CVE-2024-28757
----
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.7.3/TRB2/TRB2_R_00.07.07.3_WEBUI.bin TRB2_R_00.07.07.3]</span></b> | 2024.06.25===
* <b>Fix</b>
** <b>Network</b>
*** WebUI: fixed port advertisement change
** <b>System</b>
*** FOTA: fixed config when upgrading from older firmware with keep settings
* <b>CVE Patches</b>
** CVE-2024-31950 
** CVE-2024-31951
----
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.7.2/TRB2/TRB2_R_00.07.07.2_WEBUI.bin TRB2_R_00.07.07.2]</span></b> | 2024.06.12===
* <b>Improvements</b>
** <b>Network</b>
*** Zerotier: added backup WAN interface blacklisting if WAN failover is enabled
*** Mobile: improved communication stability with eSIM
** <b>Services</b>
*** SNMP: added bruteforce attack prevention when using SNMP v3 user
*** L2TP: improved reconnect attempt logic
** <b>System</b>
*** SSH: removed weak SSH algorithms
*** Telnet: moved to Package Manager
* <b>Fix</b>
** <b>Network</b>
*** BGP: fixed instance migration issues
*** Mobile: fixed forced APN configuration
** <b>Services</b>
*** DMVPN: fixed duplicate NHRP map entries creation
*** OpenVPN: added fixes for the insecure tls-cert-profile option usage
** <b>System</b>
*** IP Block: fixed blocking of UDP traffic
*** Uboot: fixed firmware recovery update via uboot on Windows for
* <b>CVE Patches</b>
** CVE-2023-46752
** CVE-2023-46753
** CVE-2024-31948
----
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.7.1/TRB2/TRB2_R_00.07.07.1_WEBUI.bin TRB2_R_00.07.07.1]</span></b> | 2024.05.03===
* <b>New</b>
** <b>Network</b>
*** WebUI: added ESM/EMM message notifications
*** WebUI: added internet status tracking configuration and overview widget
*** LAN: added a new IPv6 LAN status page
*** Static Leases: added a new IPv6 Static Leases page
*** WebUI: added custom domain name resolve option in “DNS” configuration page
*** Auto APN: added “uno.au-net.ne.jp” APN for “KDDI” operator
*** Auto APN: added 'eprivate010.tisparkle.com' APN for “Sparkle” operator
*** QoS: added mobile interface select option
*** Mobile: improved connection establish time for uqmi protocol
*** Failover: added additional connection flush options
*** Wireless: added auto-reconnect disable functionality
*** Wireless: added ability to use PKCS#12 certificates for EAP-TLS authentication
*** VRF: added initial Virtual Routing and Forwarding support
** <b>Services</b>
*** Post/Get: added I/O invert support
*** DLMS Client: added persistent TCP connections
*** Events Reporting: added unexpected shutdown event
*** Modbus Client: added 64bit data types
*** IPerf3: added iPerf3 to Package Manager
*** DNP3 Outstation: added I/O objects
*** Modbus Serial Server: added option 'Mobile data type'
*** TR-069: added PCI, LAC, TAC, EARFCN and Neighbour cells data to Device.MobileInfo node
*** Hotspot: added domain and subdomain options for external landing page
*** Over IP: added option 'Keep alive enable'
** <b>System</b>
*** WebUI: added the ability to generate random passwords for password input fields
*** WebUI: added reset to “Factory defaults” option
*** System: changed firmware certificate verification tool
*** IP Block: added time-based login attempt blocking
*** WebUI: added firmware update notification support
*** PAM: added the ability to set port for TACACS+
*** Logging: added multiple remote syslog servers support
* <b>Improvements</b>
** <b>Network</b>
*** Static Leases: added possibility to use MAC with wildcard
*** WebUI: added ability to disable modem update notifications
*** Topology: changed network devices scanning application
*** WebUI: improved design of Status - LAN page
*** DHCP: simplified DHCP configurations in other pages and moved full DHCP configuration to a separate page
*** WebUI: simplified data entry of DNS forwardings by separating hostname and IP address fields
*** BGP: added Virtual Routing and Forwarding (VRF) support
*** BGP: added multiple BGP instance support
*** WebUI: adjusted responsive design breakpoints
*** WebUI: added additional field for warning threshold to allow entering value as percentage in Mobile Data Limit section
*** Mobile: improved mobile services stability when SIM card is lost during SMS sending
*** Mobile: updated bridge/passthrough mode logic to flush ARP and add static ARP entry if MAC is specified
*** Mobile: improved SIM switch logging and protection on failure to acquire data
*** WebUI: added partial data loading to APN database page
*** Mobile: improved SMS sending timeouts during network issues
*** Mobile: improved connection handling when data limit is reached
*** Mobile: added metric to default gateway when using passthrough mode
*** WebUI: added validation for 2 same APNs
*** WebUI: updated Band selection field to show duplex modes in Mobile General page
*** Dnsmasq: updated dnsmasq to version 2.89
** <b>Services</b>
*** Wireguard: added option to bind tunnel to a specific interface
*** OPC UA Client: added limits (10 servers, 20 groups, 50 nodes per server, 50 values per group)
*** DLMS Client: increased maximum count of connection sections to 30
*** DLMS Client: added short name referencing
*** SNMP: set strict default community access when IPv6 address is used
*** SNMP: improved sysName OID to set device's hostname
*** Auto Reply: added available SMS message parameters to "Message text" input
*** Modbus Client: allow using diacritics in SMS alarms
*** Hotspot: moved MAC blocking option from Access Control to Hotspot page
*** WebUI: added MAC authentication support when using RADIUS authentication mode
*** WebUI: moved licenses to footer
*** AVL: added HDOP in TAVL settings
*** AVL: added ADC and ACL I/O types for secondary AVL rules
*** NTRIP: added a limit of 20 configurations
*** OpenVPN: added the bridge option for selecting the network device to be bridged with
*** OpenVPN: added possibility to create more than one TAP client
*** SSTP: updated package version to 1.0.19
*** Mosquitto: updated package version to 2.0.17
** <b>System</b>
*** WebUI: added more strict password requirements for restoring backup
*** SMTP: added option to either not verify SMTP server or upload SMTP server's CA file to verify authenticity
*** WebUI: Added the ability to choose the ROOT CA when using certificates from the device
*** WebUI: unified time format to ISO8601 across the entire WebUI
*** WebUI: added ability to choose imported certificate and key as 'Server certificate' and 'Server key' in 'Access Control'
*** WebUI: added 'Hosts' and 'IP Addresses' options for 'Simple' certificate generation and certificate signing
*** WebUI: changed firmware update option to server as a default option
*** WebUI: improved first login password change logic
*** Certificates: updated Root CA certificates
*** GPL: added offline package preparation command for GPL builds
*** Speedtest: added multiple connections support to improve accuracy
*** Libcap: updated package version to 2.69
* <b>Fix</b>
** <b>Network</b>
*** Topology: fixed showing interfaces with assigned VLAN
*** WebUI: fixed static routing creation for GRE instance
*** Network: fixed DHCPv4 relay mode enabling
*** Mobile: fixed PIN code set after modem restart
*** Mobile: fixed an issue where using SIM change command on one SIM slot modems would reset connection
*** Mobile: fixed an issue where message storage would not be checked correctly
*** Mobile: fixed temperature value sometimes returning 0
*** Mobile: fixed denied roaming flag set
*** Mobile: fixed issue where RSSI value was displayed as 0 when using 2G/3G network types
*** SIM Switch: fixed an issue when low "Check interval" was causing connection to fail
*** SIM Idle Protection: fixed problem when the SIM slot remained unchanged
*** Mobile: fixed an issue where SIM switch would fail when switching to PUK blocked SIM
*** Mobile: fixed an issue where sim switch would be executed twice immediately causing sim to not be switched
*** Mobile: fixed SIM PIN saving for non primary SIM cards
*** Failover: fixed Failover missing active rules when using multiple source and destination IP addresses
*** Failover: fixed an issue where failover would not function correctly while using a mobile interface
*** WebUI: fixed network and failover interface metric sorting synchronization issue
*** WebUI: fixed failover rule policy save issue with newly added WAN interface
*** Interfaces: fixed failover value for new WAN being taken from WAN that was just deleted
** <b>Services</b>
*** Modbus Client: allow using negative floating point values in requests
*** Azure IoT Hub: fixed Data to Server minor WebUI dependency bugs
*** Data to Server: fixed DLMS data formating
*** Data to Server: fixed Network link state data display
*** DLMS Client: fixed segfault while reading profile generic COSEM object
*** DLMS Client: fixed profile generic entries reading
*** DLMS Client: fixed application memory allocation issues
*** SSTP: fixed route adding when default route is enabled
*** SNMP: fixed VLAN OID naming
*** OpenVPN: added fixes for instance status tracking functionality
*** OpenVPN: resolved uptime counting issues
*** PPTP: fixed PPTP instance deletion problem
*** Azure IoT Hub: fixed 'contentType' telemetry message parameter
*** Hotspot: fixed password validation for locally created users and signed-up users
*** Hotspot: fixed session invalidation after deleting registered user
*** Hotspot: fixed SMS OTP password reuse
*** Hotspot: fixed firewall rule creation
*** PPTP: fixed problem related with routes when failover is enabled
*** Modbus Client: fixed issue where service freezes when SMS alarm is sent
*** Modem over serial: improved robustness against modem reboots
*** Modbus TCP Over Serial Gateway: fixed gateway returning corrupted data with larger baud rates
*** Modbus Server: updated 'GPS fix time' register to store the UTC date and time of GPS position
*** WebUI: fixed data loading error in Input/Output > Post/Get page
*** MQTT Publisher: fixed device/router topic naming bug
*** UPnP: updated package version to 2.3.4
** <b>System</b>
*** NTP Client: fixed ‘Count of time synchronizations’ execution when synchronization to mobile operator is chosen
*** Package Manager: fixed spinner message when restarting network after package upload or download
*** Package Manager: fixed supported devices check when installing a package from server
*** WebUI: fixed language install from uploaded package after upgrade with keep settings
*** WebUI: fixed an issue when a user was not logged out after changing profiles
*** Telnet: fixed segmentation fault during concurrent connections
*** CLI: fixed enter key issue on mobile chromium based browsers
*** System Users: fixed SSH session close after deleting user or disabling SSH access
*** Profiles: fixed profile migration with installed packages
*** WebUI: fixed Hotspot log page table search functionality
*** Speedtest: fix missing download speed on some servers
*** PAM: updated libpam to version 1.6.0
* <b>CVE Patches</b>
** CVE-2022-4603
** CVE-2022-23308
** CVE 2022-45061
** CVE-2023-0466
** CVE-2023-6129
** CVE-2023-7042
** CVE 2023-24329
** CVE 2023-27043
** CVE-2023-42366
** CVE-2023-46218
** CVE-2023-46219
** CVE-2023-46752
** CVE-2023-46753
** CVE-2023-48795
** CVE-2024-2397
** CVE-2024-25062
** CVE-2024-27913
** CVE-2024-22365 
----
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.6.10/TRB2/TRB2_R_00.07.06.10_WEBUI.bin TRB2_R_00.07.06.10]</span></b> | 2024.04.04===
* <b>Fix</b>
** <b>System</b>
*** Ledman: fixed memory leak
----
===<b>TRB2_R_00.07.06.8</b> | 2024.03.25===
Firmware <b>R_00.07.06.8</b> was removed due to an issue with inefficient memory allocation for LED control.
* <b>New</b>
** <b>WebUI</b>
*** Added eSIM support
* <b>Improvements</b>
** <b>Services</b>
*** IPSec: disabled libgmp in favor of openssl
*** IPSec: updated Strongswan to 5.9.6
* <b>Fix</b>
** <b>Services</b>
*** IPSec: increased charon load timeout
*** IPSec: fixed loading of large private keys
----
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.6.6/TRB2/TRB2_R_00.07.06.6_WEBUI.bin TRB2_R_00.07.06.6]</span></b> | 2024.03.04===
* <b>New</b>
** <b>Services</b>
*** Added domain and subdomain options for external landing page in Hotspot
* <b>Improvements</b>
** <b>System</b>
*** Minified *.svg WebUI files to save space on the device
*** Removed unused easy-rsa package to increase free space
* <b>Fix</b>
** <b>Network</b>
*** Fixed mobile daily data usage representation
** <b>Services</b>
*** Fixed OverIP serial utility issue where after some time server mode can't accept incoming connections anymore
----
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.6.5/TRB2/TRB2_R_00.07.06.5_WEBUI.bin TRB2_R_00.07.06.5]</span></b> | 2024.02.21===
* <b>New</b>
** <b>Network</b>
*** Added support for multi line USSD
** <b>WebUI</b>
* <b>Improvements</b>
** <b>Network</b>
*** Improved DMZ to use its source zone on port forwards creation
** <b>System</b>
*** Updated netifd version to 2024-01-04
*** Updated PPP package version to 2.4.9
*** Updated E2fsprogs package version to 1.47.0 
*** Updated Musl package version to 1.2.4
* <b>Fix</b>
** <b>Services</b>
*** Fixed Modbus TCP Over Serial Gateway crash occurring at start up in some edge cases
*** Fixed custom GPS NMEA prefix
** <b>WebUI</b>
*** Fixed action descriptions in the traffic rules table
*** fixed BACnet allow remote access functionality
** <b>System</b>
*** Fixed year 2038 problem with time counter overflow
----
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.6.3/TRB2/TRB2_R_00.07.06.3_WEBUI.bin TRB2_R_00.07.06.3]</span></b> | 2024.01.17===
* <b>Improvements</b>
** <b>Services</b>
*** Added multiple hosts support for GPS HTTPS, NMEA and AVL services
*** Increased DLMS Client connection timeout for TCP sockets
* <b>Fix</b>
** <b>Services</b>
*** Fixed DLMS Client memory leak with profile generic COSEM class
*** Fixed function 5 not working with high register numbers in MQTT Modbus Gateway service
** <b>WebUI</b>
*** Fixed Events Log sorting and search features
** <b>System</b>
*** Patched CVE-2024-0193 vulnerability
*** Patched CVE-2023-51779 vulnerability
*** Updated OpenSSH to 9.6p1 version, fixed CVE-2023-51385 and CVE-2023-51384
*** Fixed profile migrations, added error handling when trying to change profile while it is still applying
----
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.6.1/TRB2/TRB2_R_00.07.06.1_WEBUI.bin TRB2_R_00.07.06.1]</span></b> | 2024.01.04===
 
* <b>Fix</b>
** <b>Services</b>
*** Fixed issue with NTPclient zombie processes

===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.6/TRB2/TRB2_R_00.07.06_WEBUI.bin TRB2_R_00.07.06]</span></b> | 2023.12.20===
 
* <b>New</b>
** <b>Network</b>
*** Enabled IPv6 by default for mobile interfaces
*** Added operator blacklisting and whitelisting based on mobile country code
*** Added SIM card not inserted event in Events Log
** <b>Services</b>
*** Added OPC UA Server
*** Added the ability to set port for TACACS+ in PAM service
*** Added switch to enable using root certificate authority for MQTT alarms in Modbus Client services
*** Added new alarm action "Ubus event" in Modbus Client services 
*** Added new input "Modbus alarms" in Data to Server service
*** dded wget ping subtype support in Events Reporting service
*** Added new I/O SNMP OID that returns numeric I/O state
*** Added new Post/Get service action "mobile_sim_pin" for changing used SIM PIN code on the device
*** Added TLS support for OverIP serial functionality
** <b>WebUI</b>
*** Renewed user interface design
*** Added network interface name change functionality
*** Added last resort configuration option for multiwan policy rules
*** Added indication when new modem firmware is available
*** Added mobile connection establishment display in mobile status page
*** Added default value for "Reset threshold" field in Low Signal Reconnect feature
** <b>System</b>
*** Added ability to enable/disable SSH access for specific users in System Users
*** API support

* <b>Improvements</b>
** <b>Network</b>
*** Disabled operator scan when SIM card is not inserted
** <b>Services</b>
*** Expanded GRE VPN keep alive functionality to disable routes from unreachable tunnel
*** Added PKCS#12 certificate container authentication method in IPsec VPN
*** Added TLV message_payload support for SNMP service
*** Added Purple.ai configuration profile
*** Replaced option "No leading zeros" with "Remove all zeros" in Over IP serial functionality
*** Added possibility to assign mobile interface in SQM service
*** Added additional anonymous phone number validation in Mobile Utilities service
*** Added "N/A" signal strength response in DNP3 service if SIM card is not inserted 
** <b>WebUI</b>
*** Improved Events Log page loading by adding asynchronous pagination 
*** Removed requirement for Diffie-Hellman parameters in OpenVPN service
*** Added improvements for creating OpenVPN IPv6 configurations
*** Added auto redirect after changing router's IP address or port 
*** Added "Interface" dropdown for interfaces selection in Wake on LAN service
*** Increased Data to Server service MQTT topic length limit to 65535 characters
*** Added OSPF external routes section to Status page
*** Moved device menu entry “Reboot” to header menu
*** Added indication in Overview, Status -> Mobile and WAN pages when mobile data limit is reached
*** Updated Operator state field to show if modem is in limited service
*** Combined Mobile Usage day, week, month and total pages into one
*** Updated Realtime data -> Mobile signal page design to show all available modems and their bands data in one graph
*** Added message when SIM card requires PIN/PUK code in Status -> Mobile page
** <b>System</b>
*** Added Mosquitto CVE patch 2023-28366
*** Added Mosquitto CVE patch 2023-3592
*** Updated cURL version to 8.4.0
*** Updated kernel version to 5.4.259
*** Added RMS data display to generated troubleshoot 
*** Added downloaded Package Manager packages list to generated troubleshoot 
*** Added process activity load list to generated troubleshoot
*** Changed default OPKG feed to use Teltonika's URL 

* <b>Fix</b>
** <b>Network</b>
*** Fixed DMVPN firewall rule creation issues
*** Fixed Failover missing active rules when using multiple source and destination IP addresses
*** Fixed mobile service crash due to buffer overflow while reading partially overwritten SMS
*** Fixed an issue with Manual APN connection making attempts too rapidly 
*** Fixed deny data roaming functionality when transitioning between roaming and home operator network
*** Fixed network disconnection on mobile network detach and DHCP lease loss situations 
*** Fixed VoLTE configuration after modem reboot
*** Fixed Mobile interface bridge and passthrough mode connectivity loss
*** Fixed an issue where rarely PIN code would get removed after SIM switch
*** Fixed mobile operator list being not updated after changes in WebUI
*** Fixed issue where mobile interface was unreachable after device reboot or interface restart while using Failover service
** <b>Services</b>
*** Fixed SSH module enable in PAM service
*** Added minimum free space check when saving logs to flash in Logging service
*** Fixed "Set multiple coils" function sending too many bytes in Modbus Client services
*** Fixed multiple Events Reporting messages being sent when Firewall configuration is changed
*** Fixed VRRP instances advertising wrong virtual IPs
*** Added Hotspot information in SNMP MIB file
*** Fixed registered Hotspot Local Users showing random username
*** Fixed selection of MAC Auth for LAN interfaces in Hotspot service
*** Fixed inconsistent Hotspot login behaviour when using MAC Auth with Password
*** fixed instance shutdown after last local user deletion
*** Fixed RMS Hotspot data display for devices without WiFi support
*** Fixed Cumulocity app not sending any telemetry data
*** Fixed Call Utilities failure when caller id is hidden during a call 
*** Fixed AVL with poor mobile connections 
*** Fixed default profile SMS Utilities I/O status rule configuration in Profiles functionality
*** Fixed serial timeout not working in Over IP serial functionality
*** Removed "Echo" option in Modbus TCP over Serial functionality
*** Fixed CRC verification failing when CRC is correct in Modbus TCP over Serial functionality
*** Fixed crash when getting unexpected messages from RTU in Modbus TCP over Serial functionality
*** Fixed RMS I/O data display to return values calculated by formula
** <b>WebUI</b>
*** Fixed side menu style issues when Japanese language is used
*** Fixed displaying of vendor names in Topology page
*** Fixed language packs being selectable when still in Package Manager queue
*** Added ability to configure IPv6 BGP peer
*** Fixed realtime graphs responsive design issues
*** Fixed not all LAN interfaces shown in dropdown in Hotspot service page
*** Fixed modem updater legacy firmware flashing
** <b>System</b>
*** Patched FRR CVE-2023-38406
*** Patched FRR CVE-2023-38407
*** Patched FRR CVE-2023-41358
*** Patched FRR CVE-2023-41360
*** Patched FRR CVE-2023-41909
*** Patched FRR CVE-2023-47234
*** Patched FRR CVE-2023-47235
*** Patched OpenSSL CVE-2023-3446
*** Patched OpenSSL CVE-2023-3817
*** Patched LibXML2 CVE-2023-39615
*** Patched LibXML2 CVE-2023-45322
*** Patched FFMPEG CVE-2021-28429
*** Patched FFMPEG CVE-2022-48434
*** Patched dnsmasq CVE-2023-28450
*** Fixed running out of space when SSHFS is mounted in /tmp while generating troubleshoot

===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.5.4/TRB2/TRB2_R_00.07.05.4_WEBUI.bin TRB2_R_00.07.05.4]</span></b> | 2023.11.09===
 
* <b>Improvements</b>
** <b>WebUI</b>
*** Improved asynchronous pagination in events log pages
*** Optimized Overview page load
*** Added resource loading cancellation after switching to different page

===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.5/TRB2/TRB2_R_00.07.05_WEBUI.bin TRB2_R_00.07.05]</span></b> | 2023.10.09===
 
* <b>New</b>
** <b>Network</b>
*** Added "shared.m2m.ch" APN for Swisscom IoT operator to APN database
*** Added "gamma" APN to auto-APN database
*** Added "soracom.io" APN for Soracom operator to APN database
*** Added "simbase" APN to auto-APN database
*** Added "pnd" APN for Pond IoT to auto-APN database
*** Added "spitfire1" APN for Spitfire operator to APN database
*** Software Offloading enabled on default configuration 
*** New argument in "gsmctl" CLI command for Carrier aggregation
*** Numeric mode support for modem AT commands
*** Enabled dynamic MTU configuration on mobile interfaces by default
** <b>Services</b>
*** DLMS Client package
*** 7zip package
*** TincVPN package
*** Added router uptime and mobile connection uptime data parameters to SNMP
*** Custom MQTT publisher/subscriber topics definition support 
*** Alternative configuration file upload support for MQTT Broker service
*** Device Provisioning Service support for Azure IoT Hub service
*** Added more mobile usage parameters to SNMP
*** SIM Idle Protection package
*** AVL collection based on minimum accuracy for GPS service
*** Moved SOcat to Package Manager
** <b>WebUI</b>
*** Firewall status page
*** Page search feature
*** Network Topology page
*** "Allow insecure connection" option for MQTT TLS protocol in Data to Server service
*** Package Restore feature Enable/Disable option
*** Hotspot client connection/disconnection trap option for SNMP service
*** Added Events log trap option for SNMP service
*** Confirm dialog when cancelling a verified package in Package Manager
*** "Bridge ALPN" option for Bridge configuration in MQTT Broker service
*** New subtypes of events that specify a specific port on "Events Reporting" and "SNMP Trap rules" pages
*** Specific firmware packages repository link in Package Manager page 
*** Ability to enter decryption passphrase for encrypted private keys 
*** "Reconnect" button in RMS page
*** New event "Device startup completed" in Events Reporting service 
*** "Write to config" option for SIM Switch action in I/O Juggler service
*** Added formula for analog signal value conversion to other unit value 
*** Configurable GPS NMEA prefix
*** Support for using hostnames in "Server address" field for NTRIP service
*** "Start up message" field for Modem control serial utility
*** Modem Debug page
*** APN database management page added to package manager
*** Added "Message forwarding" option in SMS Rules page when rule type is "Execute custom script" 
*** Ability to unblock SIM card and insert SIM PIN in Overview page
*** New SMS rules "Reset mobile connection" and "Reload config"
*** "SMS limit clear due" display in Overview page
*** Added modem temperature to System -> Status page
*** New "Server+Client" work mode for OverIP Serial Utility
*** New "Connect on data" action for OverIP Serial Utility
*** Multiple Client instance support for OverIP Serial Utility
** <b>System</b>
*** Mechanism to rebrand WebUI using GPL
*** Possiblity to create web applications with closed-source GPL
 
* <b>Improvements</b>
** <b>Network</b>
*** Moved FRR VTYSH package to package manager
*** Made newly created Firewall Traffic, NAT rules and Port Forwards disabled by default
*** Improved Interfaces to enable IPv6 DHCP server when mobile v6 or v4v6 PDP type is set
*** Improved auto APN selection
*** SMS sending event is now logged into events log
*** Improved roaming control
*** Removed unused APN usernames and passwords from auto-APN database
*** Added connection to the operator when no mobile interfaces are active
*** Improved VoLTE management functions
*** Improved cases where Low Signal Reconnect sometimes executed prematurely
*** Improved wrong SIM PIN remove logic
** <b>Services</b>
*** New reworked Data to Server
*** UPNP moved to package manager
*** Added IPv6 support for Modbus TCP Server/Client services
*** Refactored Azure IoT Hub service
*** Improved resiliency to timeouts in Modbus Client service
*** Added PDU data type to Modbus read requests
*** Added new formatters for MQTT alarms in Modbus Client service
*** Added main section to make test functions independent in Modbus Client service
*** Improved WAN IP register reading time in Modbus service
*** Sped up default profile and profile template generation for Profiles functionality
*** Optimized profile change time for Profiles functionality
*** Added IPv6 support for Stunnel VPN
*** Added MAC blocking for client connections after set amount of failed login attempts in Hotspot service
*** Improved TCPdump by allowing to capture packets from any interface
*** Added OSPF support for DMVPN
*** Updated Hotspot password hashing to sha512
*** Added Hotspot service support 
*** A single SMS message with multiple PDUs is sent instead of multiple SMS messages in Email to SMS service
*** Allowed connection to SMPP server using IPv6 address
*** Extended IP unblock action functionality in SMS Utilities
*** Increased allowed Email to SMS service message size to 61440 bytes
*** Added parameter "%gs" that sends GPS data in formatted info message
*** Updated AVL to prefer checking network status through Failover if configured
*** Added I/O pin name to trap notification message
** <b>WebUI</b>
*** Reorganized menu
*** Updated header design
*** Split Interfaces configuration in Advanced mode into two pages: WAN and LAN, identically as in Basic WebUI mode
*** Moved Interfaces IPv6 configuration into seperate tab
*** Added client/server status information in OpenVPN instance overview page
*** Added more IPv6 information to interface status in Interfaces page
*** Removed "Custom delegated IPv6-prefix" field from DHCPv6 configuration in Interfaces page
*** Disabled DHCPv6 interface editing while in basic mode
*** Refactored custom DHCP options into seperate modal
*** Added automatic start and end IP allocation for DHCP server configuration in Interfaces
*** Added client/server status information in L2TP VPN page
*** Added "MTU" field to L2TP client configuration page
*** Added CHAP, PAP and MSCHAP-v2 authentication fields to L2TP instance configuration 
*** Added more detailed IPsec VPN status information
*** Encryption AES-256-CBC added as default in OpenVPN
*** Added "Authentication algorithm" support to OpenVPN configuration with static key mode
*** Added GRE (DMVPN) VPN tunnel source support to any instead of specific interface 
*** Improved Hotspot landing page theme package removal
*** Added upload and download theme functionality to Hotspot Landing page
*** Improved ZeroTier VPN bridge configuration
*** Added ability to adjust order of rules in Firewall page
*** Added IPv6 RAW table to be displayed in Status -> Firewall
*** Improved file upload component's visual appearance
*** Change "Allow anonymous" option default value to 0 in MQTT Broker
*** Added option to specify "Client ID" in MQTT Publisher
*** Added functionality to select specific interface in Web Filter service
*** Allowed to select  FTP server subfolder in Traffic Logging service
*** Renamed various service master/slave naming convention in config files, package names and webUI to client/server
*** Added "Create static" button in Status -> Network -> LAN which bind DHCP lease for device
*** Updated Status -> Network -> Mobile page layout
*** Added bandwidth, provider in Status -> Network -> Mobile page
*** Added colors for signal strength values in Status -> Network -> Mobile page
*** Added frequency, pcid, mcc, mnc and LAC values in Status->Network->Mobile page
*** Refactored network type selection in Network -> Mobile -> General page
*** Serving cell information is not returned anymore when SIM card is not inserted
*** Changed default "Check interval" option value in Network -> Mobile -> SIM Switch page
*** Added button in a Scanned operators table which allows to add an operator to the operator list
*** Added search bar in Mobile Utilities -> SMS Utilities page
*** Added SMS sent and limit count to Network -> Mobile -> General page
*** Added GPS longitude and latitude data in TR069
*** Updated Mobile Signal graphs to show EC/IO and RSCP values when network type is 3G
*** Added IPv6 support in OverIP serial utility
*** Updated "Change SIM" action type to display configured SIM target in I/O Juggler -> Actions overview page
** <b>System</b>
*** Updated kernel version to 5.4.251
*** Updated UCI version to 2021-10-22
*** Updated SSHFS version to 3.7.1
*** Updated FRR suite to 8.4.2
*** Updated cURL version to 8.2.0
*** Updated TCPdump version to 4.99.4
*** Updated C-ares version to 1.19.1
*** Updated iproute2 version to 5.19.0
*** Updated libubox package version to 2021-08-19
*** Added CVE patch CVE-2023-2650
*** Added additional firmware information in CLI prompt banner
*** Connection mode LED now blinks on data transfer
*** Changed "routername" to "devicename" in system config file
*** Made all clients get disconnected out once dropbear service is disabled
*** Improved firmware downgrade restrictions for certain regions
*** Device name is now displayed in browser tab when in WebUI login page
*** Added NF conntrack information in generated troubleshoot archive

* <b>Fix</b>
** <b>Network</b>
*** Fixed UDP Broadcast Relay service crashing on start without physical network device
*** Fixed SMS limit period migration
*** Fixed SMS limit size breaking various functionality
*** Fixed custom IPv6 DNS option not overriding default DNS from operator
*** Fixed an issue with blacklist and whitelist connection 
*** Fixed multipart SMS handling
*** Changed modem init behavior if Modem Control serial utility feature is enabled
*** Fixed wrong SIM state display when SIM is fully blocked
*** Fixed incorrect virginmobile APN MNC
*** Fixed mobile operator scanning fault when no mobile interfaces are active
*** Fixed mobile interfaces generating multiple events on mobile connection
*** Fixed PDU SMS parsing when operator provides user data header in single part SMS
*** Added scheduled data limit clear for inactive mobile interfaces
*** Fixed connection tracking for main interface in Failover
** <b>Services</b>
*** Fixed reconnecting to inactive connections for Modbus Server service 
*** Fixed Modbus Client response after reboot write request
*** Fixed Modbus Server to show error when trying to get operator name without SIM
*** Updated Modbus Client to handle large numbers of schedule rules, when frequency is set to schedule (Daini
*** Fixed “Input” rule displaying incorrect and missing ports in Network -> Firewall -> Traffic Rules
*** Fixed WireGuard VPN endpoint resolving problem
*** Peer cache is no longer deleted when ZeroTier service is restarted
*** Fixed RMS data collection about the list of devices connected to WiFi
*** Fixed showing incorrect Internet state in RMS
*** Fixed WiFi client info display in RMS
*** Implemented error handling when device is blocked or unrecognized by RMS
*** Fixed L2TP client sometimes not adding routes on successful connection
*** Fixed NTP time sync with browser functionality in some edge cases
*** Fixed reinstalled packages" verification when device name is changed
*** Fixed an issue where signal query would return invalid value instead of error in case of no signal in MQTT Publisher service
*** Fixed OpenVPN firewall rule creation for both IPv4 and IPv6
*** Fixed OpenVPN server crash loop after changing authentification from TLS to Static Key
*** Fixed IPsec VPN connection problem with small lifetime values
*** Fixed IPsec "Default Route" not working when Flow Offloading is enabled
*** Fixed an issue where system directory could be used as a mount point in SSHFS service
*** Fixed IP block feature to unblock an OpenVPN IP address on successful authentification
*** Fixed package installation process bug when packages have different architecture names
*** Added "bearer token" authentication functionality in Dynamic DNS
*** Fixed MQTT Broker "local_port" option keep settings migration
*** Remove public keys when key-based authentication is disabled in Access Control
*** Fixed "Parity" field "Mark" and "Space" options being ignored in DNP3 Serial services
*** Corrected SNMP MIB file syntax according to standards
*** Fixed returned port count in SNMP
*** Fixed disabled CLI remote access taking up a session slot
*** Fixed received SMS messages parsing with trailing whitespaces
*** Fixed VPN status rule message text in SMS Utilities
*** Fixed data being lost when sending large packets to serial devices using OverIP serial utility
*** Fixed OverIP possible serial device overflow and minor bugs
*** More robust error recovery for RTU communication in Modbus Client service
*** Fixed UDP payload size in GPS AVL
** <b>WebUI</b>
*** Fixed empty events cards in Overview page when no content is available
*** Fixed modal form inputs not clearing upon closing after nested modal is saved
*** Fixed select menu closing when selecting custom option
*** Fixed multi select expanding table row when adding new values
*** Fixed global section caching after deleting a section in a table
*** Fixed unpredictable search logic in tables
*** Fixed interfaces reordering by metrics in Failover page
*** Removed ability to select ports on ICMP and ESP protocol in Failover page
*** Fixed wrong status when interface is disabled in Failover page
*** Fixed firewall zone and rule creation/deletion on VPN configuration creation/deletion
*** Fixed STP enabling issue in Interfaces
*** Fixed EIGRP status info in Dynamic Routes
*** Fixed issue with custom DHCP options where you could not have multiple values per rule
*** Fixed Routing/NAT Offloading section display in Network -> Firewall -> General Settings when device is not supported
*** Fixed SSH/HTTP/HTTPS/ICMP setting in Network -> Firewall -> Attack Prevention page
*** Fixed failing Firewall rules with united protocol formats
*** Fixed zone select component not closing options menu when selecting an option in Firewall pages
*** Fixed memory leak when cancelling file uploads on Chromium-based browser
*** Fixed group settings saving by removing deprecated ":section" routes in Administration -> User Settings -> System Users
*** Fixed allowing IDs above 247 in Modbus Client service
*** Fixed selecting SIM in Modbus Client service Alarms
*** Fixed Modbus Alarm telephone number limit
*** Fixed to show available options for test requests on error in Modbus Client service
*** Fixed Modbus Alarm I/O pin display values
*** Fixed issue when creating instance named "gre" does not show in GRE VPN
*** Remote endpoint field now allows underscore character in IPsec VPN
*** Fixed ZeroTier wrong service status display in Status -> Services
*** Fixed problems with L2TP/PPTP VPN firewall rules automatic creation
*** Fixed problem related to the enable/disable toggle in OpenVPN instance overview page
*** Added fixes for key-direction missing problem when uploading OpenVPN config file
*** Fixed login page read-only inputs after custom user logout
*** Fixed issue when double clicking firmware upgrade cancel button returned error
*** Fixed Package Manager prompt message to appear when package requires network restart
*** Fixed showing in queue packages when they contained special symbols in the Package Manager page
*** Fixed various visual Side Widget bugs
*** Fixed Data to Server DNP3 filter from flash display
*** Fixed incorrect source data displayed in Realtime Data -> Connections table
*** Fixed memory expansion confirmation prompt title
*** Fixed incorrect configuration saving in Hotspot 2.0 service
*** Disabled password hashing for new user creation in Hotspot service
*** Fixed Hotspot landing page themes saving bug
*** Fixed test email sending to more than one recipient in Events Reporting page
*** Fixed VLAN OID values in SNMP service
*** Output proper error message in case of hardware not being supported in Firmware Upgrade
*** Fixed being able to open side widget when user does not have read access
*** Fixed profile creation when current configuration is not present
*** Fixed wrong protocol data display in "Access control" page
*** Fixed carrier aggregation information when no connection is made or SIM card is not inserted
*** Changed representation of mobile cell ID from hexadecimal to integer type
*** Fixed Mobile Utilities "SMS forwarding to HTTP" URL generation
*** Fixed an issue where sometimes bands were not represented correctly on certain modems
*** Fixed provider information and IMSI value representation when SIM and modem cannot provide this information
*** Fixed mobile pages throwing 404 error when modem disconnects
*** Fixed WebUI showing mobile connection when no SIM card is inserted
*** Fixed "Clear Collect Data" button logic to not clear overall mobile usage info
*** Fixed "Used data" showing large negative numbers for disabled mobile interfaces with Data Limit enabled
*** Fixed GPS AVL I/O trigger option filtering
** <b>System</b>
*** Patched CVE-2023-0386 vulnerability
*** Patched CVE-2023-0464 vulnerability
*** Patched CVE-2023-0465 vulnerability
*** Patched CVE-2023-2602 vulnerability
*** Patched CVE-2023-3772 vulnerability
*** Patched CVE-2023-4128 vulnerability
*** Patched CVE-2023-33476 vulnerability
*** Patched CVE-2023-28484 vulnerability
*** Patched CVE-2023-29469 vulnerability
*** Patched CVE-2023-31490 vulnerability
*** Patched CVE-2021-36369 vulnerability
*** Patched CVE-2023-48174 vulnerability
*** Delayed Custom Scripts execution on boot, after storage devices are mounted
*** Fixed Custom Scripts permissions after save
*** Changed certificate expiry calculation mechanism to fix Y2K38 bug
*** Fixed downloading of certificates that have a space in their name in Administration -> Certificates -> Certificates Manager
*** Fixed Events Log database rotation to prevent log partition space exhaustion
*** Fixed duplication and sorting of all events IDs in Events Log
*** Fixed FOTA crash when current hours is with leading 0
*** Fixed crontab job removal after disabling FOTA
*** Changed Mosquitto build options to not include cJSON library
*** Fixed device name resetting to default upon refresh in Administration
*** Fixed log messages not showing sent SMS info

===<b>[[Media:TRB2_R_00.07.04.5_WEBUI.bin|TRB2_R_00.07.04.5]]</b> | 2023.07.24===

* <b>Improvements</b>
** <b>Network</b>
*** Improved MBN reselection algorithm when switching SIM
*** Improved SIM card change detection algorithm
*** Improved connection establishment speeds after sim switch
*** Added metric field support in BGP Route-maps page
** <b>WebUI</b>
*** Updated SIM slot labeling in modem card Overview page

* <b>Fix</b>
** <b>Network</b>
*** Fixed an issue with MBN selection when device is started for the first time
*** Fixed an issue where MBN activation would not be successful
*** Fixed service provider parsing when operator does not provide all fields for Quectel modems
*** Fixed a condition where mobile connection would not get established after a SIM switch
*** Fixed an issue with SIM switch causing connection problems
*** Fixed modem not establishing mobile connection by failing to parse MBN list

===<b>TRB2_R_00.07.04.4</b> | 2023.06.26===
<b>Note:</b> Firmware version <i>TRB2_R_00.07.04.4</i> released on 2023.06.26 was removed due to an issue on certain modems with failing initial mobile connection after upgrading from <i>TRB2_R_00.07.02.5</i> or lower.
----
* <b>Improvements</b>
** <b>Network</b>
*** Improved mobile operator query methods and operator name parsing in various services
** <b>Services</b>
*** Improved UPNP lease file validation
** <b>System</b>
*** Device name is now displayed in browser tab when in login page

* <b>Fix</b>
** <b>Network</b>
*** Fixed a connection issue with bridge/passthrough mode when reconnecting ethernet cable
*** Fixed long mobile operator list parsing for whitelist/blacklist functionality
*** Patched CVE-2023-32233 vulnerability
*** Fixed supported mobile bands setting
*** Fixed possibility to add a network that is not yet created on a firewall zone

** <b>Services</b>
*** Fixed connection establishment for RMS MQTT service
*** Implemented partial restart when connection with RMS server fails
*** Fixed device name resetting to default upon WebUI page refresh
*** Fixed being able to set device name without passing validations
*** Fixed WireGuard port change in firewall traffic rule when modifying instance port

===<b>[[Media:TRB2_R_00.07.04.3_WEBUI.bin|TRB2_R_00.07.04.3]]</b> | 2023.05.11===

* <b>Improvement</b>
** <b>System</b>
*** Optimized firmware image size
*** Removed SSH RSA key generation
*** Added SSH ECDSA key generation

* <b>Fix</b>
** <b>Network</b>
*** Fixed an issue with mobile when Call Utilities configuration is invalid
*** Fixed an issue where sometimes PIN/PUK code was deleted when performing a SIM switch
** <b>Services</b>
*** Fixed incorrect mobile data usage provided to RMS service
** <b>System</b>
*** Fixed an issue on bootloader web recovery hanging with certain firmware sizes

===<b>[[Media:TRB2_R_00.07.04.2_WEBUI.bin|TRB2_R_00.07.04.2]]</b> | 2023.04.18===

* <b>New</b>
** nftables support

* <b>Improvement</b>
** <b>Network</b>
*** Added PDP profile registry and LTE SMS format functions & management for the Verizon network
*** Improved SIM detection algorithm
*** Improved Multi-APN connection establishment time
** <b>WebUI</b>
*** Improved Overview page performance
** <b>System</b>
*** Changed hostname to router name
*** Updated OpenSSL to version 1.1.1t
*** Updated CA certificates to version 20211016
*** Updated libiwinfo to version 2022-08-19

* <b>Fix</b>
** <b>Network</b>
*** Fixed IPv4, IPv6 mobile connection restarts
*** Fixed operator scanning when mobile interface is disabled
*** Fixed data limit and tracking when software flow offloading is enabled
*** Added network reload call before bringing the mobile interface up
*** Fixed a segmentation fault issue which would occur occasionally when switching between SIM cards
*** Fixed Port-based VLAN ID calculation issue
*** Fixed PDP context authentication when using special characters
** <b>Services</b>
*** Fixed event text for configurable inputs/outputs on I/O Juggler
*** Fixed I/O PIN3 value not changing via MODBUS TCP
*** Added I/O status request error handling in various WebUI pages when the I/O service is booting up
*** Fixed wrong timezone returned issue in Operator Station Synchronization & Timezone Synchronization
*** Fixed MODBUS TCP Slave memory leak issue when requesting mobile parameters
*** Fixed OpenVPN enabling/disabling when using Password or TLS/Password authentication modes
*** Fixed OpenVPN keep alive setting migration issue
*** Fixed PPTP server name setting migration issue
*** Fixed RS485 2nd stop bit support
*** Fixed missing WebUI issue caused by Email Relay installation
*** Fixed NTP's Operator Station Synchronization memory leak issue
*** Fixed test email validation
** <b>System</b>
*** Fixed libcares vulnerability CVE-2022-4904
*** Fixed frr vulnerability CVE-2022-37035
*** Removed ability for non root users to edit scripts that get executed as root

===<b>[[Media:TRB2_R_00.07.04.1_WEBUI.bin|TRB2_R_00.07.04.1]]</b> | 2023.03.24===

* <b>Fix</b>
** <b>Network</b>
*** Fixed Data Limit issue

===<b>[[Media:TRB2_R_00.07.04_WEBUI.bin|TRB2_R_00.07.04]]</b> | 2023.03.07===

* <b>Improvements</b>
** <b>WebUI</b>
*** Improved data persistence between page refreshes
*** Improved page navigation behavior
*** Improved redirect logic to open configuration edit modals
*** Updated the 'Status -> Mobile' page
*** Updated interface card in the Overview page
*** Separated Sent and Received data bars on the chart in the Mobile Usage page
** <b>Network</b>
*** Added an info message displayed when a faulty SIM card is inserted
*** Added ResIOT operator's APNs to the APN database
*** Improved mobile connection re-establishment after reboot
*** Improved mobile connection recovery in cases where it was lost unexpectedly
*** Improved 'Deny data roaming' operation when switching between operators
** <b>Services</b>
*** Added MQTT support to I/O Juggler
*** Added support for new NMEA sentences: GARMC, GAGGA, GAGSA, GAVTG, GBGSV, GBGSA, GQGSV, GQGSA
*** Added an error message when trying to send an SMS from the 'Send Messages' page with no SIM card inserted
*** Changed the behavior of setting the 'Write to config' flag in the 'mobileoff' SMS rule
*** Added argument support for the 'Execute custom script' SMS rule
*** Added a frequency option 'schedule' Modbus Master
*** Added pagination to Events Reporting overview
*** Added limit to Events Reporting rule list
*** Added email logging for Events reporting
*** 'Sync with browser' button in the NTP page now also synchronizes the time zone
*** Added a limit of 30 for NTP instances
*** Made Networks selections in the 'Traffic Logging' page to display interface choices dynamically
*** Added "make before break" option to IPsec configuration
*** Added MODBUS TCP connection handling layer to MQTT-MODBUS Gateway
*** Improved MODBUS Master connection handling to reduce connection count
*** Updated modbus request error messages 
*** Added OpenVPN server ip block support
*** Added MQTT support for MODBUS Master alarms
*** Added the possibility to get the device's Ethernet port data via SNMP
*** Improved error messages in the Serial Utilities page
** <b>System</b>
*** Updated bash to version 5.1.16 
*** Added detailed FW update failure error message to Events Log
*** Improved firmware upload/validation error messages
*** Updated Turkish language support
*** Added protocol column to IP block page
*** Added "vpns.log" file to the Troubleshoot package
*** Added Wireguard tunnel information to the Troubleshoot package
*** Updated default admin group access rights
*** Updated DFOTA notification to show "More info" only when the update is forced

* <b>Fix</b>
** <b>WebUI</b>
*** Fixed MAC address showing on mobile interfaces
*** Fixed mobile cell ID displaying in hexadecimal
*** Fixed mobile data limit card creation in the Overview page
*** Fixed modem widget disappearing from the Overview page
*** Fixed Services page not displaying data after Thingworx package is installed
*** Added DNP3 to the 'Status > Services' page
** <b>Network</b>
*** Fixed interface priority change issue
*** Fixed a Custom Firewall Rule editing issue
*** Fixed DMZ configuration saving while it is disabled
*** Fixed Port Scan script execution failure
*** Fixed Firewall zone duplication issue
*** Fixed call function when VoLTE is disabled
*** Fixed VoLTE control when IMS is not enabled
*** Fixed mobile IPv6 IP checking when the device didn't get a correct IP address
*** Fixed APN authentication when using empty credentials
*** Fixed manual APN selection from list
** <b>Services</b>
*** Fixed disappearing GPS NMEA and HTTPS fields
*** Fixed unused NTRIP option deletion on NMEA source change
*** Fixed I/O Scheduler overlapping instances issue
*** Fixed Input/Output image pin colors
*** Fixed issue that causes ADC subscribers to receive notifications for when ACL is active
*** Fixed DNP3 serial master not working when Stop bits are set to 2
*** Fixed DNP3 requests not deleting along with instance
*** Fixed DNP3 memory leak occurring after spamming the test request button
*** Fixed Serial Over IP related Firewall rule setting
*** Added limitations on message size and quantity of email messages in Email to SMS
*** Fixed SMTP HELLO value parsing issue
*** Fixed SMS message window reset button
*** Fixed not being able to save empty 'Message text' field in Auto Reply
*** Fixed multi-part SMS concatenation
*** Fixed multi-part SMS processing
*** Fixed SMS error message on 'Mobile Data Reset' action
*** Fixed Data To Server JSON format %n, %N and %s flag issues 
*** Fixed Events Reporting email data clean
*** Fixed Events Reporting missing config selections
*** Fixed GRE Tunnel's 'Tunnel source' field validation when the source is custom
*** Fixed IPsec instance deletion after removing DMVPN package
*** Fixed IPSec migration via Backup file when DMVPN is configured
*** Fixed IPsec naming issue when the includes an equals sign
*** Fixed L2TP client to use correct interface on failover events
*** Fixed L2TP over IPsec connection dropping issue when connecting from a Windows client
*** Fixed MODBUS database size limiting issue 
*** Fixed MODBUS MQTT Gateway client ID input
*** Fixed MODBUS TCP Slave RSSI value
*** Fixed MODBUS test button returning errors when several non-connected devices are configured
*** Fixed NTP Etc/GMT+1 and Etc/GMT-1 time zones
*** Fixed OpenVPN password validation when no CA certificate is uploaded or 'custom' template is selected
*** Fixed OpenVPN Static Key configuration saving by making Static key upload required
*** Fixed OpenVPN TLS client creation issue while LAN is down
*** Fixed Package Manager displaying non-existent packages
*** Fixed Package Manager errors showing up after successful installations
*** Fixed Periodic Reboot entry duplication after a power cycle
*** Fixed PPTP 'Client to client' option not being applied after save
*** Fixed receiving excessive device state emails after a reboot is initialized over RMS
*** Fixed WebUI unavailability after unsuccessful package install
** <b>System</b>
*** Fixed vulnerabilities CVE-2022-3524, CVE-2022-3566, CVE-2022-3567, CVE-2022-39188, CVE-2022-45934, CVE-2022-47929
*** Fixed bash vulnerability CVE-2022-3715
*** Fixed CGI-IO file download vulnerability CVE-2022-38333
*** Fixed libxml2 vulnerability CVE-2022-40304
*** Fixed libcurl vulnerabilities CVE-2022-43551 and CVE-2022-43552
*** Improved file upload logic
*** Fixed GPL firmware compilation with selected Tinc package
*** Fixed OpenVPN Static Key migration via keep settings issue
*** Fixed NTP time zone name setting migration when the name contains whitespaces
*** Fixed language setting issue
*** Fixed integer validation on industrial services
*** Fixed LED indications when PDP type is IPv6
*** Fixed issues with PDP type and SMS limit period migration via keep settings

===<b>[[Media:TRB2_R_00.07.03.4_WEBUI.bin|TRB2_R_00.07.03.4]]</b> | 2023.02.09===

* <b>Fix</b>
** <b>Network</b>
*** Changed generic modem restart method
*** Fixed mobile page VoLTE switching issues
** <b>Services</b>
*** Sanitized tcpdump storage location
** <b>System</b>
*** Fixed CVE-2023-32349 vulnerability

===<b>[[Media:TRB2_R_00.07.03.2_WEBUI.bin|TRB2_R_00.07.03.2]]</b> | 2023.01.13===

* <b>New</b>
** <b>System</b>
*** Japanese language

* <b>Improvements</b>
** <b>Network</b>
*** Optimized mobile netifd script installation

* <b>Fix</b>
** <b>Network</b>
*** Shortened modem hang monitor timeout
*** Fixed VLAN option setting when changing VLAN ID
** <b>Services</b>
*** Fixed RS485 not receiving data without transmiting prior

===<b>[[Media:TRB2_R_00.07.03.1_WEBUI.bin|TRB2_R_00.07.03.1]]</b> | 2023.01.03===

* <b>Improvements</b>
** <b>System</b>
*** Remove front-end certificate validation
** <b>Network</b>
*** Optimized mobile netifd script installation

* <b>Fix</b>
** <b>Network</b>
*** Fixed modem communication validation
*** Fixed connection establishment in IPv6 only mode
** <b>Services</b>
*** Fixed libxml2 vulnerability CVE-2022-40303
*** Fixed an IPsec Phase one & two setting migration issue
*** Returned missing udp_client_count option to Over IP mode
*** Fixed operator index in DNP3 outstation; added GPS resubscribe; fixed segfault when GPS is enabled
** <b>System</b>
*** Fixed JSON key parsing; keys can now be any printable character sequence
*** Fixed memory leak in 'session' module
** <b>WebUI</b>
*** Fixed file pretty name parsing

===<b>[[Media:TRB2_R_00.07.03_WEBUI.bin|TRB2_R_00.07.03]]</b> | 2022.12.16===

* <b>New</b>
** <b>Network</b>
*** Firewall DMZ page
** <b>Services</b>
*** Java package
*** SFTP server support
*** OPC UA client
*** NTRIP
*** BACnet
*** Modbus Serial Slave
** <b>System</b>
*** Portuguese language
*** Spanish language
*** Turkish language
*** Email Relay package
** <b>WebUI</b>
*** New Web menu design

* <b>Improvements</b>
** <b>Network</b>
*** Updated modem handling, attachment, tracking and connection establishment processes
*** Added the possibility to select multiple ports in all firewall port fields
*** Added 'Match' traffic by type option to firewall traffic rules
*** Added DNS servers and routing table fields to the Wireguard page
*** Improved generating network topology
*** Moved Relayd, UDP Relay & Static Leases to the Interfaces menu section
*** Update Firewall Traffic Rules page with DSCP and MARK options
*** Added keepalive, holdtime and connect timers to BGP configuration
*** Added 'Use gateway metric' to network protocols web interface
*** Added more DHCPv6 client events to system log
*** Moved IP Filter rules from Modbus TCP Gateway and Over IP services to Firewall page
*** Added option to select subnet parameters in mobile Passthrough/Bridge modes 
*** Added WhereverSIM operator APN and fr.lebara.mobi APN to APN database
*** Added mobile connection state for IPv6
*** Added switch back to default SIM after SIM Switch service disable
*** Added wget tracking method to WAN Failover
*** Added interface checks to remove inaccurate Failover events from the Event Log
** <b>Services</b>
*** Added the possibility to switch profiles on GPS geofencing events
*** Added satellite count and accuracy columns to GPS Map page
*** Added execute custom script SMS Utilities rule
*** Added receiver and transceiver mode support to SMPP
*** Added timezone synchronization with GSM operator option to NTP Client
*** Updated Zerotier web interface
*** Added IPsec Flush connection option on tunnel initialization
*** Added MODBUS slave regfile validation
*** Added delay, number of timeouts, always reconnect options to MODBUS Master service
*** Added DMVPN Phase 2 and Phase 3 support
*** Added synchronization counting to NTP client
*** Expanded the data that is sent to the Cumulocity cloud with device log, mobile data usage nd GPS data
*** Added 'Unregister' button to RMS page
*** Added new data monitoring options to SNMP: configuration state of wireless, smart queues & VLANs
*** Updated Zerotier package to version 1.10.1
*** Added automatic package removal upon failed installation in Package Manager
*** Added option to describe custom routing table and MTU auto counting to Wireguard VPN
*** Added IP blocking to MQTT Bridge for failed login attempts to prevent bruteforce attacks
*** Updated sqm-scripts to version 1.5.1
*** Improved MODBUS Master service: added multiple datatypes, added multiple register reading for alarms
*** Added monthly reboot option to periodic reboot function
*** Added support for multiple custom option selection to SSTP configuration
*** Added PKCS12 certificate chain support to OpenVPN
*** Improved MQTT to support multiple port listening, multiple bridge connections, notification settings and added support for custom configuration file
*** Added QoS selection to MQTT Modbus Gateway
*** Improved RAM usage during upload and installation of packages via Package Manager 
*** Updated curl to version 7.86.0
*** Added brute-force prevention measures to Post/Get
*** Added automatic private and public key generation to Wireguard VPN
*** Added multiple Remote source IP support to IPsec
*** Added the possibility to configure multiple IPsec phase 1 and phase 2 proposals
*** Added functionality to rotate log file when log is saved to Flash memory
*** Improved performance while fetching packages on repeat visits to the Package Manager page
*** Added custom value calculation to ADC and ACL pins
*** Added MODBUS TCP Slave registers to store Analog Current Loop value
** <b>System</b>
*** Added a 'test mail' button to the Administration -> Recipients page
*** Added option to clear blocked IPs in the Access Control page after reboot
*** Updated Web Request-Response core logic
*** Added certificate validation to all services that support certificate upload
*** Updated URL protocol validations
*** Removed profile update requests during Save & apply
*** Optimized profile switching logic
** <b>WebUI</b>
*** Added an indication to the Interfaces page that displays when data limit is enabled
*** Added bootloader version to the Device section in the System page
*** Added configuration page shortcuts to Overview page widgets
*** Added tooltip in Overview that show free, used and total RAM/Flash values on mouse cursor hover
*** Updated network interfaces protocols web interface
*** Updated 404 page to include navigation menu

* <b>Fix</b>
** <b>Network</b>
*** Fixed jumbo frames MTU issue
*** Added the 'Any' choice to source & destination IP address field in NAT rule edit
*** Fixed NHRP web interface issues
*** Fixed WAN interface configuration interfering with LAN
*** Fixed mdcollect memory leak issue
*** Fixed data limit not resetting properly
*** Fixed incorrect mobile data usage calculations for multiple day periods
*** Fixed an Auto APN 'Keep settings' issue
*** Fixed data counting after mobile data limit has been reached
*** Fixed mobile band not setting correctly on first try
*** Fixed incorrect data limit conditions causing unwanted SIM switches
*** Fixed Passthrough DHCP lease time setting
*** Fixed mobile bridge mode issue when no DNS servers are supplied
*** Added new Operator Lists instance name validations
*** Fixed SIM Switch issue on newly created mobile interfaces
*** Fixed switch back to primary SIM rule disable when the default SIM is changed
*** Fixed incorrect SIM Switch behavior on low signal value
*** Fixed Wired WAN connectivity issue when Failover interfaces are disabled
*** Fixed Failover fallback issue
*** Fixed mobile passthrough mode for single ethernet port devices
** <b>Services</b>
*** Corrected serial connection baud rates
*** Fixed hostname resolution in 'Over IP' serial type
*** Fixed RS232/RS485 starting issues
*** Fixed relay state switching
*** Fixed Save & Apply issue with ADC/ACL type condition on I/O Juggler
*** Added I/O restart on configuration profile change
*** Fixed I/O voltage range display for power socket pins
*** Fixed SMNP OID for I/O state
*** Fixed I/O Juggler SMS text message Save & Apply issue
*** Fixed Delay field in GPS HTTPS/HTTP Server Settings section 
*** Fixed AVL packet timestamp display 
*** Fixed issue that prevented GPS map display after clearing cache 
*** Removed unnecessary field from the Port Mirroring page
*** Fixed Events Reporting 'Changing to SIM1/SIM2' options
*** Fixed I/O analog voltage type display issue
*** Fixed UCI SMS Rule return message to display new changes
*** Fixed DNP3 issues when asking for modem temperature
*** Fixed base64 encoding of SMS messages when forwarding to HTTP
*** Fixed SMS sending issues when using multiple APN
*** Added Gateway modem option to IP Block and WoL in SMS Rule edit
*** Fixed unblocking IP addresses with an SMS message
*** Fixed Mobile Utilities page not load properly on some occasions
*** Fixed dbus vulnerability CVE-2020-35512
*** Fixed dnsmasq vulnerability CVE-2022-0934
*** Fixed ext4 vulnerability CVE-2021-3428
*** Fixed kernel vulnerabilities CVE-2021-3669, CVE-2021-4203, CVE-2022-1353, CVE-2022-3435, CVE-2022-20008, CVE-2022-30594 
*** Fixed libxm12 vulnerability CVE-2022-29824 
*** Fixed Linux vulnerabilities CVE-2021-4148, CVE-2022-0480, CVE-2022-1055, CVE-2022-0886, CVE-2022-2663, CVE-2022-36879 for v5.4
*** Fixed MQTT DoS vulnerability CVE-2021-41039
*** Fixed privoxy vulnerability CVE-2021-44542
*** Fixed python3 vulnerability CVE-2022-42919
*** Fixed strongswan vulnerabilities CVE-2021-41991, CVE-2021-45079
*** Fixed uboot vulnerabilities CVE-2022-30552, CVE-2022-30790
*** Fixed CVE-2023-32350 vulnerability
*** Fixed switching between RMS connection types while the device is unregistered
*** Fixed reload issues in website blocking feature
*** Fixed IPsec PSK secret required field validation
*** Fixed bandwidth limiting after QoS is enabled for the first time
*** Fixed Dropbear issues when logging in over IPv6
*** Fixed Modbus status in Status -> Services page
*** Fixed Azure IoT Hub application issues when sending large volumes of data
*** Fixed Azure IoT Hub MQTT password validation
*** Fixed DMVPN configuration migration issue
*** Fixed DMVPN duplicate select options, added suffix to mobile interfaces to use IPv4
*** Fixed DMVPN IPsec connection issue
*** Fixed DMVPN mobile interface 'Keep settings' migration issue
*** Fixed Dynamic DNS long hostname text display issue
*** Fixed Events Reporting memory leak issue
*** Fixed Events Reporting not triggering after flipping an I/O slider
*** Fixed FOTA cron job not starting after factory reset
*** Fixed IPsec local firewall option parsing
*** Fixed IPsec tunnel creation issue when compatibility mode is used and the tunnel name contains an underscore
*** Fixed L2TP, PPTP, SSTP state display in the Status -> Services page
*** Fixed NTP pool hostname validation
*** Fixed OpenVPN certificate remove with Static key and TLS authentication methods
*** Fixed OpenVPN configuration saving issue when using HMAC key authentication
*** Fixed OpenVPN custom dev name transformation to correct format
*** Fixed OpenVPN device name setting logic when uploading config from file
*** Fixed OpenVPN instance status display
*** Fixed OpenVPN TAP (bridged) configuration detection
*** Fixed Qos configuration saving issue occurring after instance deletion
*** Fixed RMS JSON incorrect WAN state and IP information
*** Fixed RMS step access issue in the Setup Wizard page
*** Fixed SNMP issues after reboot while using a Hotspot
*** Fixed SNMP generating MIB files for devices in accordance with to their hardware
*** Fixed SNMP traps not working after SNMP is installed from server
*** Fixed SSTP client route creation issue
*** Fixed UPNP secure mode not turning off issue
*** Fixed Wireguard route to endpoint issue
*** Fixed manual package installation for queued packages
*** Fixed NAT Rules dependency from IPsec web instance
*** Returned usleep utility
*** Updated Australian and South African NordVPN server IP addresses
** <b>System</b>
*** Fixed certificate signing issues
*** Fixed Telnet, CLI access blocking after max invalid tries
*** Fixed FW upgrade with 'Keep settings' while low free space is available
*** Fixed backup file duplication issue
*** Fixed network device handling in system
** <b>WebUI</b>
*** Fixed side widget accessibility during first login
*** Fixed file upload issues
*** Fixed drag and drop issue in the Traffic Rules page
*** Fixed protocol display in the overview of the Interfaces page
*** Fixed blocked IP settings migration during a FW upgrade with the 'Keep settings'
*** Fixed login errors after browser tab restoration
*** Fixed redirect to newly set IP address after Interface configuration
*** Fixed firmware upgrade verify spinner not closing
*** Fixed an issue with file upload via drag and drop

===<b>[[Media:TRB2_R_00.07.02.7_WEBUI.bin|TRB2_R_00.07.02.7]]</b> | 2022.09.12===

* <b>Improvements:</b>
** Improved manual-auto connection mode

* <b>Fixes</b>
** Fixed AT command for SMS storage usage
** Fixed CVE-2022-1012 memory leak vulnerability
** Fixed CVE-2022-37434 kernel vulnerability
** Fixed GPS constellation settings
** Removed memory leak on port events

===<b>[[Media:TRB2_R_00.07.02.6_WEBUI.bin|TRB2_R_00.07.02.6]]</b> | 2022.08.24===
* <b>Improvements:</b>
** Added 'home.vodafone.de' APN
** Improved stability of device information storage

* <b>Fixes:</b>
** Added SMSC type omitting when empty SMSC number parsed in SMS PDU mode
** Fixed VoLTE management
** Fixed OpenVPN tls-auth and tls-crypt option names

===<b>[[Media:TRB2_R_00.07.02.5_WEBUI.bin|TRB2_R_00.07.02.5]]</b> | 2022.08.12===

* Improvements:
** Updated curl to version 7.83.1
** Updated firmware validation error messages
** Added multiple source IP address support to the Port Forwards page
** Increased custom APN Username & Password field maximum length to 64 symbols
** Added auto switch to modem's SMS storage when SIM card storage doesn't exist
** Improved mobile connection status handling


* Fixes:
** Fixed CVE-2022-32205, CVE-2022-32206, CVE-2022-32207, CVE-2022-32208 curl vulnerabilities
** Fixed CVE-2022-30065 busybox vulnerability
** Fixed file upload path traversal
** Removed Data to Server limit to proccess less than 10 instances
** Fixed Data to Server 'out of memory' crashes when database is full or has a large amount of data
** Fixed OpenVPN dev setting logic
** Fixed OpenVPN updating from legacy issue that caused IPv6 not to work
** Fixed MAC and leasetime setting for Bridge & Passthrough modes

===<b>[[Media:TRB2_R_00.07.02.4_WEBUI.bin|TRB2_R_00.07.02.4]]</b> | 2022.07.20===

* Improvements:
** Added default password change warning message before firmware downgrade
** Extended time period for device to make connection to operator
** Reduced the number of modem reboots when changing mobile settings
** Reduced excessive log output when no SIM card is inserted
** Added modem restart prevention on modem init
** Added disable RPLMN option in the SIM section of the SIM card config

* Fixes:
** Fixed CVE-2022-2068 vulnerability
** Disabled autoconnect on stop-network call

===<b>[[Media:TRB2_R_00.07.02.2_WEBUI.bin|TRB2_R_00.07.02.2]]</b> | 2022.06.27===

* Improvements:
** Updated FSTools package to version 2022-05-03
** Added security headers to web requests
** Added ping to DNS IPv6 support
** Added modem reset to default state after device FW upgrade
** Modem init now checks NVRAM sensitive commands before setting 
** GSM output was made consistent

* Fixes:
** Fixed CVE-2019-12900 libbz2 vulnerability
** Fixed CVE-2022-23303 hostapd vulnerability 
** Fixed CVE-2022-29581 Linux kernel vulnerability
** Fixed CVE-2022-29458 ncurses vulnerability
** Fixed CVE-2022-1292 c_rehash script command injection vulnerability 
** Fixed behavior of some gsmctl commands
** Fixed band locking issue

===<b>[[Media:TRB2_R_00.07.02.1_WEBUI.bin|TRB2_R_00.07.02.1]]</b> | 2022.06.06===

* Improvements:
** Improved GSM related messages in Troubleshoot logs

* Fixes:
** Fixed IGMP Proxy menu item not appearing after package installation
** Fixed default mobile network configuration generation
** Fixed MODBUS write requests and Mobile Utils option setting

===<b>[[Media:TRB2_R_00.07.02_WEBUI.bin|TRB2_R_00.07.02]]</b> | 2022.05.23===

* <b>New features</b>
** Overview side widget
** IGMP Proxy
** Privileged Access Management (PAM)
** AWS Greengrass support
** HTTPS certificate and key upload feature
** SSH public keys edit box
** License page
** WAN Failover
** DNP3 data for Data to Server

* <b>Improvements</b>
** Updated busybox to version: 1.34.1
** Updated curl to version 7.79.1
** Added iptables filter package for string filtering
** Added CHAP authentication for L2TP VPN
** Added IPv6 support for L2TPv3 VPN
** Added EAP-MSCHAPV2 authentication method for IPsec VPN
** Added IPv6 support to Auto Reboot
** Added 'Save to flash' and 'Test configuration' button to DNP3 configuration page
** Updated SNMP version 5.9.1
** Added OpenSSL authentication options to SNMPv3
** Added support for OSPF redistribution options and OSPF neighbors
** Added password field to BGP Peers page
** Extended BGP "AS" field validation to accept integers up to 4294967295
** Added "DHE+RSA" to OpenVPN cipher selections
** Increased OpenVPN max password length from 128 bytes to 512 bytes
** Made HMAC key direction initial value dependent on the role of the instance (client or server)
** Made HMAC key and HMAC authentication key upload fields required 
** Added DES to IPsec encryption algorithms selections
** Added special character support for CHAP secrets
** Added validation requirements for PPTP user list username field
** Added option to manually enter Public key in Wireguard configuration
** Made generating Wireguard  keys possible only while in auto mode
** Added Events Log database to troubleshoot archive
** Added RFC1918 filter field
** Added the possibility to unblock multiple blocked devices at once
** Added 'Port' column to blocked login attempts table
** Added Speedtest server refresh
** Updated Speedtest server list
** Added asterisk option to Site Blocking
** Added MD5 and SHA256 checksums to package validation page
** Changed certificate requirements to only require client key file if client certificate is used
** Added pagination and data retention between table pages
** Added pagination functionality to tables when there are more than 10 records
** Improved table sorting by saving user provided sort settings in the browser
** Improved drag and drop functionality
** Added the possibility to drag and drop files onto upload components
** Moved 'Root CA' from the 'Access Control' page to the 'Certificates' page
** Added 'Strict-Transport-Security' response header for HTTPS
** Added 'breadcrumbs' to modal windows
** Improved initial WebUI loading after login
** Added mobile bytes sent and bytes received SNMP OIDs
** Added mobile LED turn off feature ('System -> Administration'  page)
** Added 'iot.1nce.net', 'internet', 'VZWINTERNET' and Truphone APNs to APN database
** Updated mobile usage data point calculation logic
** Added the possibility to manually enter operator number
** Improved obtain mobile cell ID process
** Added modem restart if SIM card is removed during APN database fetching process
** Added unauthorized call logging
** Added space character support in SMS commands
** Disabled SMS modem storage configuration form when SIM is not inserted
** Changed SMS '%wi' parameter value to return IP address of any currently used WAN interface (not only wired)
** Added external modem SMS limit Overview card and widget
** Made in-use APNs visible next to mobile interface configurations (before clicking the 'Edit' button)
** Added duplicate value check for list configuration options
** Changed mobile card instance design
** Fixed 'Mobile Data usage reset' SMS rule
** Fixed the default state parameter of SMS list POST/GET command
** Added AVL "Static Navigation" flag
** Added GSV parsing for NMEA collecting
** Added newline and GPS location actions to I/O Juggler
** Added I/O SNMP trap
** Added ISO 8601 time format to I/O Juggler's '%ts' parameter
** Added device name parameter '%pc' to I/O Juggler
** Added ACL or ADC SNMP trap notification on enter/exit/both
** Added ACL MQTT topic
** Added PPPoE VLAN priority support
** Made VRRP ping section dependent on main instance
** Added CRC verification support to MODBUS and RS232/RS485

* <b>Fixes</b>
** Fixed CVE-2021-20322, CVE-2021-4197, CVE-2022-1011, CVE-2022-0847 kernel vulnerabilities
** Fixed CVE-2022-28391 busybox vulnerability
** Fixed CVE-2018-16789 shellinabox vulnerability
** Fixed CVE-2021-44543, CVE-2021-44542 privoxy vulnerabilities
** Fixed CVE-2021-43618 GNU Multiple Precision Arithmetic Library vulnerability
** Fixed zlib backport security issue
** Fixed Wireguard firewall zone assignment
** Fixed queued packages disappearing from list after FW upgrade with keep settings
** Fixed error message display for multiple input validation rules
** Fixed incorrect DHCP validation range for start and limit fields
** Removed 'Bring up on boot' option from network interface configuration pages
** Fixed coma-separated DHCP options disappearing after save 
** Fixed exclude and listen interfaces
** Fixed 'Use broadcast flag' option saving
** Fixed firewall zone assignment when creating new interfaces
** Fixed OpenVPN 'Netmask' and 'IP address' field validations
** Fixed OpenVPN TAP configuration saving issue
** Fixed OpenVPN switching to TUN mode when uploading a configuration from file
** Fixed dynamic BGP route state display
** Fixed BGP peer enable in edit page
** Fixed issue when no L2TP client instance could be bound to IPsec
** Fixed firewall rule and zone behavior related to config section creation
** Added default value for L2TPv3 netmask, which is now written to config after save
** Fixed passthrough option saving to IPsec file
** Fixed DMVPN issue where instance configuration could not be saved
** Fixed Wireguard peer could not be saved issue
** Fixed NTP client time synchronization after factory reset
** Fixed device time display with selected time zone
** Fixed MODBUS TCP indexation missing bracket issue
** Fixed initial MODBUS TCP request count validation
** Fixed PIN 3/4 direction switching over MODBUS TCP
** Fixed MODBUS data to MQTT socket closing issue when connection fails
** Fixed MODBUS alarm configuration deletion
** Fixed DNP3 master not working after FW upgrade with 'keep settings'
** Fixed DNP outstation not returning error messages
** Added missing SNMP objects: mobile IP, data sent/received today
** Fixed MQTT Publisher 'Remote address' field validation
** Fixed long interface name support for Azure IoT Hub
** Increased maximum Azure IoT Hub 'Connection String' length to 4096 characters
** Fixed missing sent/received data issue
** Fixed URL input field length validation
** Fixed admin login issue after upload of backup from a device with older firmware versions
** Fixed MAC address formatting in Events reporting messages
** Fixed Events reporting DHCP lease message spam, when no new lease is added
** Fixed logging crashing after downloading Troubleshoot file
** Made Wake on LAN visible only on devices with Ethernet ports
** Fixed Traffic log file transfer to FTP server
** Fixed Web Filter service reloading after a host list file is uploaded
** Fixed access denied messages when sending JSON-RPC requests from root user
** Fixed error message display about duplicated intervals in Profile scheduler
** Fixed FW upgrade with 'keep settings' migration issue for Access Control's 'Fail count' and 'Device port' fields
** Corrected OSPF Routing card values, value positions and names
** Fixed global secret instances not being removed when there are no IPsec instances
** Fixed uploaded file remove icon not staying in position on hover
** Fixed Overview card collapse issue that made it unresponsive after too many clicks
** Removed WAN6 interface from the Overview page
** Fixed mobile IPv6 display in Events Reporting status messages
** Fixed Bridge mode when DNS2 is not available
** Fixed PAP/CHAP username and password fields not saving in interface edit window
** Fixed sending email without secure connection for providers that support such an option
** Fixed 'N/A' parameter showing up in SMS Utilities monitoring status message
** Fixed Call Utilities Events Log message for reboot rule 
** Fixed SMS command validation for no-authorization option
** Fixed MODBUS SMS alarms 'Enable' option saving
** Fixed running RMS with no SIM card inserted issue
** Fixed firmware available on server version checking issue
** Fixed CVE-2020-15078 openvpn vulnerability
** Fixed storage calculation for packages
** SMS Utilities: enhanced service security
** Fixed firmware deletion after leaving the page
** Fixed setup wizard redirect after LAN IP change
** Fixed various validation bugs, typos, option hints & alignments
** Fixed multiple IPv6 configuration field validations
** Fixed unnecessary SIM switch issue when Multi-APN is configured
** Fixed MODBUS TCP slave modem not starting after switching SIM cards
** Fixed restoring GPS HTTPS options after FW upgrade with 'keep settings'
** Fixed missing NMEA sentences
** Fixed NMEA cache sentence calculation
** Fixed 'outside/inside range' condition for AVL I/O Analog input trigger
** Fixed relay output value display in I/O Juggler condition page
** Fixed I/O Juggler's WiFi rule not enabling or disabling WiFi interfaces
** Fixed I/O Juggler's double delete issue on I/O Juggler action and condition instances
** Fixed I/O Juggler's incorrect I/O status messages
** Fixed automatic port open after RS232/RS485 Over IP server & bidirect configuration changes
** Fixed 'iostatus' SMS rule
** Added multiwan support for Wireguard default route

===<b>[[Media:TRB2_R_00.07.01.4_WEBUI.bin|TRB2_R_00.07.01.4]]</b> | 2022.02.25===

* <b>Improvements</b>
** Increased Port Forwards rule max name length
** Added a new '%it' parameter for UTC time in ISO 8601 format to I/O Juggler
** Improved RS232 Port and Timeout validation

* <b>Fixes</b>
** Added missing bracket to the end of MODBUS messages
** Fixed preserving the contents of /etc/luci-uploads/ after FW upgrade with the 'Keep all settings' option
** Fixed IPv4-Gateway column showing empty values in the Status -> Routes page
** Fixed firewall extra option validation
** Fixed usage of custom headers in I/O Juggler HTTP action
** Fixed 'verify' option parsing for I/O Juggler
** Changed the logic of uploading files to the modem
** Fixed OpenVPN server configuration with password authentication
** Fixed NTP interval length validation
** Fixed network interface enable after Drag & Drop
** Updated NTP client interval to 24h
** Fixed connection to whitelist carriers
** Fixed Passthrough mode when DHCP is disabled
** Fixed 'Deny data roaming' feature
** Fixed mobile blocking dependency on region
** Disabled Ping To DNS functionality when Bridge/Passthrough mode is enabled

===<b>[[Media:TRB2_R_00.07.01.2_WEBUI.bin|TRB2_R_00.07.01.2]]</b> | 2022.01.04===

* <b>New features</b>
** DFOTA modem upgrade system for Quectel modems

* <b>Improvements</b>
** Removed L2TP section title prefixes

* <b>Fixes</b>
** Fixed IPSec crashing issue using mobile
** Fixed FW flashing when chip is in unknown state
** Fixed CPU usage percentage display in the Overview page
** Fixed FOTA timeout issue when server does not respond
** Fixed installation of backup packages
** Fixed mobile data limit display after profile change
** Fixed Bridge mode without multi-APN
** Fixed multi mobile interface checking
** Fixed error handling when the modem is not responding
** Prolonged autoconnect setting timeout

===<b>TRB2_R_00.07.01</b> | 2021.11.18===
<b>Note:</b> Firmware version TRB2_R_00.07.01 released on 2021.11.18 was removed due to an issue with IPsec tunnel while using mobile connection.
----
* <b>New features</b>
** Tinc VPN
** German language support
** Manual-Auto operator select

* <b>Improvements</b>
** Improved WebUI functionality when multiple browser tabs are open
** Updated base to OpenWrt version 21.02
** Updated kernel to version 5.4.141
** Updated mtd-utils to version 2.1.2 
** Updated busybox to version 1.33.1
** Updated ubus to version 2021-06-3
** Updated ubox to version 2020-10-25
** Updated rpcd to version 2021-03-11
** Updated opkg to version 2021-06-13
** Updated fstools to version 2021-01-04
** Updated wwan to version 2019-04-29
** Updated ethtool to version 5.10
** Updated uhttpd to version 2021-03-21
** Updated ppp to version 2020-10-03
** Updated odhcpd to version 2021-07-18
** Updated hostapd to version 2020-06-08
** Updated dropbear to version 2020.81
** Updated dnsmasq to version 2.85
** Updated netifd to version 2021-07-26
** Updated firewall3 to version 2021-03-23
** Updated libjson-c to version 0.15
** Updated libevent2 to version 2.1.12
** Updated mac80211 to version 5.10.42-1
** Updated wireless-regdb to version 2021.04.21
** Updated binutils to version 2.35.1
** Updated gdb to version 10.1
** Updated strace to version 5.10
** Updated trace-cmd to version 2.9.1
** Updated valgrind to version 3.16.1
** Updated ath10k-ct-firmware to version 2020-11-08
** Updated procd to version 2021-02-23
** Updated iw to version 5.9.8
** Updated iproute2 to version 5.11.0
** Updated iptables to version 1.8.7
** Updated nettle to version 3.6
** Updated libpcap to version 1.9.1 rel3
** Updated elfutils to version 0.180
** Updated cryptodev-linux to version 1.11
** Updated linux-firmware to version 20201118
** Updated util-linux to version 2.36.1
** Updated openwrt-keyring to version 2021-02-20
** Updated mtd to version rel26
** Updated fwtool to version 2019-11-12
** Updated ca-certificates to version 20210119
** Updated wireguard-tools to version 1.0.20210223
** Updated iwinfo to version 2021-04-30
** Updated ipset to version 7.6
** Updated gre to version rel12
** Updated wolfssl to version 4.7.0
** Updated ustream-ssl to version 2020-12-10
** Updated uclient to version 2021-05-14
** Updated readline to version 8.1
** Updated mbedtls to version 2.16.11
** Updated libusb to version 1.0.24
** Updated libunwind to version 1.5.0
** Updated libubox to version 2021-05-16
** Updated libnl-tiny to version 2020-08-05
** Updated libnftnl to version 1.1.8
** Updated libiconf-full to version 1.16
** Updated libbsd to version 0.10.0
** Updated gmp to version 6.2.1
** Updated ulogd to version rel6
** Updated sqm-scripts to version 1.5.0
** Updated ntpclient to version rel14
** Updated nmap to version 7.80
** Updated curl to version 7.77.0
** Updated zerotier to version 1.6.5
** Updated xtables-addons to version 3.13
** Updated xl2tpd to version 1.3.16
** Updated stunnel to version 5.59
** Updated strongswan to version 1.0.13
** Updated sstp-client to version 1.0.13
** Updated pptpd to version rel5
** Updated openvpn to version 2.5.3 rel2
** Updated ntpd to version rel3
** Updated net-snmp to version rel2
** Updated mosquitto to version 2.0.11
** Updated miniupnpd to version 2.2.1 rel 3
** Updated etherwake to version rel5
** Updated libzip to version 1.7.3
** Updated libgpg-error to version 1.39
** Updated glib2 to version 2.66.4
** Updated libnetfilter-conntrack to version 1.0.8
** Updated libnetfilter-log to version rel3
** Updated lzo to version rel4
** Updated nghttp2 to version 1.43.0
** Updated openvpn-easy-rsa to version 3.0.8 rel3
** Updated iperf to version rel2
** Updated iperf3 to version 3.10.1
** Updated e2fsprogs to version 1.45.6
** Updated fuse to version 2.9.9
** Updated udprelay to version 2020-02-26
** Updated qmicli to version 1.28.2
** Updated pcre to version 8.45
** Updated libsmpp34 to version 1.14.1
** Updated libiwinfo to version 2.1
** Added netifd library for additional information related to network interfaces
** Updated openssl to version 1.1.1l
** Updated privoxy to version 3.0.32
** Added ACL reload method for sessions
** Added 'Advertisement interval' field to the VRRP configuration window
** Added a PPTP-to-WAN Zone Forwarding rule when default route is enabled on PPTP client
** Added email user group validation for sendind test emails with Events reporting
** Added an event logging feature for Ping Reboot events
** Improved file/section deletion logic: now files are also deleted after deleting a related config section
** Improved package deletion logic
** Added the possibility to configure multiple reboot times in one Reboot Scheduler configuration instance
** Updated 'External system log server' field validation to accept IPv6 addresses 
** Added redirect to Overview page after login
** Added WebUI session timeout after user inactivity
** Added placeholder text to dropdown menus
** Improved multi-select design and functionality
** Added Unix timestamp, local ISO time, UTC time to Modbus
** Added info message when selected file cannot be uploaded
** Improved IPsec throughtput
** Added IPSec "Compatibility mode" configuration support
** Made SNMP 'Community name' option editable
** Added the option to delete configurations to the SMS Utilities 'UCI' rule
** Added 'hour', 'week day', 'month day' slelection options to SMS Limit configuration
** Added Lithuanian and Verizon APNs
** Added modem selection for the 'Send SMS' option in Auto Reboot settings
** Added the possibility to get total data usage value without specifying time interval via ubus
** Added return SIM count command
** Added an indication to the GPS map when GPS service is disabled
** Added I/O support to SNMP
** Removed ubus list method due to security reasons
** Added MODBUS "%I, %T, %S, %r, %n" support to MODBUS Data Sender
** Removed search engine site crawling
** Improved IPSec "Local/Remote source" validation
** Added Firewall "all" and "custom" protocol options
** Added Backup file size limit of 2 MB
** Improved basic/advanced mode changing
** Improved Wireguard "IP Addresses" field validation
** Added language download support from language selection section
** Added PPTP "Client to client" configuration support
** Made DDNS "username", "password", "host" fields optional
** Added SSTP "Default route" configuration support
** Added SMS Limit hour, week day and month day support
** Added Passthrough "Leasetime" and "Unit" configuration support
** Added Call Utilities "Active Timeout" configuration support
** Added support for PL2303GC serial to USB chip
** Added GPS AVL "Don't Contain Connection" and "Retry on Fail" configuration support

* <b>Fixes</b>
** Made RMS 'Connect' button disabled when a connection attempt is already in progress
** Added validation for TLS Clients 'Private network' option
** Fixed the validation range for MTU fields
** Fixed removing firmware image file after leaving the fimware upgrade page
** Fixed network selection list for Traffic Logging - added all available LAN networks
** Fixed DHCP Options validation
** Fixed configuration profile date display
** Fixed blank page after invalid URL in login page
** Fixed TR-069 related firewall rule loading
** Fixed remote subnet netmask validation issues for the GRE Tunnel configuration
** Fixed WebUI section toggle
** Fixed package installation modal layout
** Fixed current page values showing up in login page username field
** Fixed the possibility to create section with a name that is already in use in the same config file
** Fixed OpenVPN username and password deletion when deleting configuration instance
** Fixed session closing issue for the user whose password was just changed
** Updated MODBUS credential validation
** Updated MQTT credential validation
** Fixed DNS 'Rebind protection' setting when switch is disabled
** Updated libgcrypt to version 1.9.3 to fix CVE-2021-33560
** Fixed CVE-2021-33624, CVE-2021-29648 vulnerabilities
** Fixed DHCP 'Lease time' and 'Unit' option saving over the Setup Wizard LAN page
** Fixed Reboot Scheduler not removing crontab file after disabling the rule
** Fixed OpenVPN 'Extra options' field validation to allow a space character
** Added table drag and drop functionality to the Firewall's Traffic Rules page
** Fixed DNP3 Outstation crash caused by non-void function returning no value
** Fixed RMS 'Copy' button functionality
** Fixed gsmd deamon crashing after modem restart
** Fixed gsm memory leak
** Fixed WCDMA band names for MEIG modules
** Fixed SMS Gateway loading screen issue when sending an SMS message
** Fixed mobile data database error after upgrading firmware with the 'Keep settings' option
** Fixed rpcd memory leak issue
** Fixed network information gathering
** Fixed 3G LED not being active in 3G mode
** Fixed data limit accuracy issue
** Fixed SIM Switch back to default SIM crash loop when SIM1 is disabled
** Removed unused SIM Switch struct objects
** Fixed NTP GPS Synchronization swith to enable GPS service
** Fixed MODBUS Serial Master crash when requesting a 4-byte datatype from a 2-byte data payload
** Added a check if DNP3 is installed for 'Serial type' option
** Fixed I/O Juggler hour condition interval issue
** Removed 'Memory Expansion' and 'Printer Server' from the Status -> Services page
** Patched CVE-2021-40528 vulnerability
** Patched CVE-2021-40490 vulnerability
** Patched CVE-2020-16120 vulnerability
** Fixed VLAN section creation
** Returned Interfaces "Port priority" option
** Fixed missing Content-Type header to initial WebUI response
** Fixed RIP information parsing in status page
** Fixed OpenVPN IPv6 netmask validation
** Fixed SNMP Trap Settings Host/IP field validation
** Fixed Cumulocity authentication reset
** Fixed Events Reporting rule saving

===<b>[[Media:TRB2_R_00.07.00_WEBUI.bin|TRB2_R_00.07.00]]</b> | 2021.07.16===

* <b>New features</b>
** New WebUI based on Vue.js 2.6.12
** RutOS updated to OpenWrt 19.07.7 base
** DNP3 Master and DNP3 Oustation
** 'Restore to user's defaults' SMS Utilities rule

* <b>Improvements</b>
** Updated firewall to release 3
** Updated kernel to version 4.14.221
** Updated uhttpd to version 2020-10-01
** Updated xtables-addons to release 9
** Updated mwan to version 2.8.14
** Updated pcre to version 8.44
** Updated curl to version 7.74
** Updated sqlite to version 3.33
** Updated ncurses to version 6.2
** Updated OpenSSL to version 1.1.1k
** Added full MODBUS register address expansion specifier for Data to Server
** Added full MODBUS register address legend
** Added Client ID option for the MQTT protocol in Data to Server
** Improved Data to Server sleeping accuracy
** Improved Data to Server username validation; now space is allowed
** Added firmware version OID to the SNMP service
** Added IP address family option field to the SNMP page
** Added SNMPv6 section to the SNMP Communities page
** Renamed the 'System -> Users' page to 'System -> System Users'
** Moved password changing option to the 'System -> System Users' page
** Switched to ar8216 driver
** Added IPsec XAUTH support
** Improved OpenVPN updown, init scripts to write info about instance in JSON
** Added AES-256-GCM encryption support to OpenVPN
** Added extra configuration parameters to DMVPN
** Added PSK conversion to DMVPN and single PSK types
** Improved Package Manager package installation, deletion and dependencies
** Improved Package Manager download process over FOTA
** Added new Input/Output values manageable over RMS
** Added IPv6 traffic logging
** Made 'Network -> Failover' and 'Network -> Interfaces' page data draggable on multiple browsers
** Added Input/Output Post/Get URL parameter t_time changing delay and time to seconds or miliseconds
** Added message storage management by config value
** Improved QMI error handling and status tracking
** Turned on modem in preinit for correct power-on sequence
** Added Post/Get feature to turn mobile data on/off
** Added the possibility to use 2gonly/3gonly/4gonly arguments for cellular service command alongside current 2g/3g/lte arguments
** Added "Phone number" and "Message" fields for "Send SMS" option
** Added "Host to ping from SIM1" and "Host to ping from SIM2" fields
** Added option to switch back to primary SIM card after timeout
** Added "send analog input" option to TAVL settings

* <b>Fixes</b>
** Added glib2 patch to fix CVE-2019-13012 vulnerability
** Added ntfs-3g patch to fix CVE-2019-9755 vulnerability
** Added WolfSSL patch to fix CVE-2021-3336 vulnerability
** Added Busybox patch to fix CVE-2018-1000500 vulnerability
** Added netifd, odhcp6c IPv6 routing loop on point-to-point links patches to fix CVE-2021-22161 vulnerability
** Fixed Android clients IPsec MTU/MSS size
** Fixed wrong IPsec DPD value saving
** Changed IPsec PSK maximum length to 128 symbols
** Fixed SSTP remaining up after package removal
** Fixed DMVPN crypto_proposal write to config
** Fixed I/O Juggler's SMS sending to correct group
** Fixed I/O Scheduler's relay state issue
** Added I/O direction check while changing IOs via I/O Post/Get
** Fixed float endianness mismatch on some devices MODBUS TCP Master, MODBUS Serial Master
** Fixed UPnP issue that caused config changes to apply only after service restart
** Fixed WebUI files caching when upgrading firmware
** Fixed WebUI date display format
** Fixed MODBUS returning incomplete MAC address data
** Fixed depleting IPv6 RA timeout when the ISP doesn't send RA updates
** Added "Transaction timed out" error handling
** Fixed PPPOE connection loss when wrong session PADT packet arrives
** Added gcont object tracking and info update if this service is restarted
** Fixed default SMS storage
** Fixed SMS warning sending after Mobile Data Limit change
** Fixed DHCP relaying over mobile networks
** Changed PIN code maximum length to 8 symbols
** Fixed 'I/O status' message to include correct Input/Output name based on info in ubus ioman objects
** Fixed 'Over IP' serial type's UDP issue in client mode

===<b>[[Media:TRB2_R_00.02.06.1_WEBUI.bin|TRB2_R_00.02.06.1]]</b> | 2021.02.10===

* <b>Fixes</b>
** Added dnsmasq patch CVE-2020-25681, CVE-2020-25682, CVE-2020-25683, CVE-2020-25684, CVE-2020-25685, CVE-2020-25686, CVE-2020-25687
** Fixed SSH reachable over SIM IP in early boot
** Fixed modem status after failed network scan
** Fixed mbncfg function and PIN check logic
** Fixed PPTP server interface naming
** Fixed correct client PPTP interface name selection for route creation
** Fixed adding helper to firewall's wan zone when enabling PPTP configuration
** Added package size checking when manually installing a package
** Fixed 'New Firmware Available' message display after firmware upgrade

===<b>[[Media:TRB2_R_00.02.06_WEBUI.bin|TRB2_R_00.02.06]]</b> | 2020.12.31===

* <b>New features</b>
** Operator Whitelist/Blacklist
** Web Filter
** Interface Based VLAN
** Partial and full modem control support from RS bus

* <b>Improvements</b>
** Updated base to OpenWrt 19.07.4
** Added Phone Groups as possible SMS recipients to SMS Post/Get
** Added PSK support for MQTT Broker/Publisher
** Changed Output Scheduler structure
** Removed limitation of one configuration per Input
** Added multiple modem support for TR-069
** Fixed parsing user uploaded custom OpenVPN configuration files containing carriage returns
** Added iptables conntrack flush on WAN Failover if IPsec is enabled
** Optimized package responsible for sending/receiving GRE Tunnel keepalive packets
** Added extra error checking to Package Manager when downloading packages
** Added data usage info for both SIM cards to RMS
** Added logging to syslog when Ping/Wget Reboot "Action" is set to 'None'
** Improved display of configuration tables when a lot of information is shown
** Renamed MODBUS strings to uppercase
** Added redirect to configuration page after a new configuration is created with the 'Add' button
** Added option to create a Configuration Profile from current configuration
** Added data validation to Profiles Scheduler fields
** Replaced the Firewall 'Helpers' page with conntrack helper configuration for each firewall zone
** Increased dynamic list maximum amount of values to 50
** Added the possibility to save email accounts without entering email username and password
** Unified device access password validations
** Expanded DDNS validation for domain input to accept emails
** Added SMS Utilities rule to reset mobile data usage for specified interface
** Improved SMS Utilities VPN status rule to support custom configurations
** Added SMS storage limit check after inserting a SIM card
** Changed modem name from primary to internal if device has only one built-in modem
** Improved SIM count check during init
** Added serial 1000000 bps baud rate option

* <b>Fixes</b>
** Fixed IPsec Passthrough subnet/ip value parsing to make it dynamic for leftsubnet
** Fixed occasions when error messages overlap buttons
** Fixed I/O state saving after revert back to original state
** Fixed IPsec connection after reboot
** Fixed bridged interface configuration for L2TPv3
** Removed trailing newlines in returned SNMP strings
** Fixed Events Reporting waiting to send email before rebooting
** Fixed MQTT MODBUS Gateway not working when topics have special characters
** Swapped pin3 and pin4 values in MQTT Publisher
** Added an 'IP4Table' option to advanced interface configuration
** Fixed an issue where User Scripts were being deleted after device reboot
** Fixed various WebUI validation bugs, typos, option hints & alignments
** Fixed a bug that caused an internal sever error after logging in with a username that contained special characters 
** Fixed crashes that occur after configuration files are not correctly generated
** Fixed a Firewall Port Forwarding bug which caused an internal sever error when no 'Protocol' was selected
** Fixed changing WebUI mode bug while current page is accessed with POST method
** Fixed password allowed lengths and tooltips
** Fixed mountpoint display
** Removed non-supported SMS Utilities rules
** Fixed SMS sending to Phone Group on I/O event
** Changed device name in 'Status' message to configured name instead of the default one
** Added modem reinit after SIM card initialization failure
** Fixed SMS Limit checking when messages exceed the set SMS limit
** Moved 2-8 PDP contexts to 9-16 the 2-8 are necessary for SIM card MIB APNs
** Changed mobile interface subnet to /32
** Fixed modem SIM card checking
** Fixed multi SMS handling on SMS Limit
** Fixed Call Utilities multiple SMS sending per received call
** Fixed SMS storage limit check on device reboot
** Changed SNMP mSignal, mTemperature and numSatellities datatypes to correspond to devices' MIB files
** Fixed serial over IP Bidirect mode issues

===<b>[[Media:TRB2_R_00.02.05.2_WEBUI.bin|TRB2_R_00.02.05.2]]</b> | 2020.11.19===

* <b>Fixes</b>
** Randomized the global rate limiter to mitigate "SAD DNS" attack

===<b>[[Media:TRB2_R_00.02.05.1_WEBUI.bin|TRB2_R_00.02.05.1]]</b> | 2020.09.30===

* <b>New features</b>
** DLNA media server
** iptables NETMAP extension
** "Flush connections on" option for WAN Failover
** New firmware notifications
** Updated header logo from 'Teltonika' to 'Teltonika | Networks'
** USSD command support
** Time sync via network operator's station
** GPS time synchronization

* <b>Improvements</b>
** Improved WebUI page loading speed
** Added Basic/Advanced mode selection in Setup Wizard
** Added a dropdown with a search function for time zone selection
** Added "copy to clipboard" button in Cloud Solutions next to MAC and Serial
** Added option to send all Modbus records in one packet
** Disabled IPV6 services on LAN by default
** Added password hashing in Post/Get pages
** Added a warning message about rebooting the device while certificate files are being generated
** Added status option to uploaded custom OpenVPN configuration file
** No longer showing "Enable OpenVPN config from file" option if "Enable external Services" is selected
** Added some missing placeholder values
** Added warning message about unsaved changes when leaving Auto Reboot, Periodic Reboot, Wireless pages
** Added port selection to SSTP configuration
** Changed Periodic Reboot service name to Reboot Scheduler
** Added table row highlights on hover
** Changed section name from 'Email users' to 'Email accounts' in the Recipients page
** Added network interface automatic assignment to firewall zones when interface protocol is switched
** Adjusted Azure validations
** Adjusted Local/Remote subnet field validations
** Adjusted Hotspot field validations
** Unified VPN overview section option names and titles
** Removed mandatory requirements for inter-zone forwarding source & destination options in Firewall zone configuration
** Added placeholder values for drop down options in Routing pages 
** Increased maximum package upload size
** Removed mobile interfaces from Hotspot configuration
** Added "Passthrough subnets" option to IPsec configuration page
** Added package size checking when installing packages via Package Manager
** Optimized switching between Basic and Advanced WebUI modes 
** Added missing services to Events Reporting page when selected Event is "Config change"
** Improved general web design, ordering and positioning 
** Added word wrap in the Unsaved Changes page
** Centered 'Apply' button in the Profiles page
** Hid network interfaces with DHCPv6 protocol in Overview page while in Basic WebUI mode
** Changed tcpdump "Select storage" option value from 'Internal storage' to 'RAM memory' in the System → Administration → Troubleshoot page
** Added more descriptive error messages when connection to FOTA server fails
** Updated "Local address" hint in l2tpv3 page
** Updated phone number placeholders to +37000000000
** Updated SMS rule descriptions related to phone numbers and email accounts
** Made SMS/Mobile data limit options always visible in Overview Setup page
** Added indications for which antenna connector is connected to which modem
** Adjusted Modem FW file validations
** "LAN as WAN" easy setup
** Added possibility to retrieve analog input value to Modbus TCP Slave
** Added loading spinner and a "No GPS signal" message to GPS Map page
** Removed incorrect GPS analog input option from GPS HTTPS settings

* <b>Fixes</b>
** Fixed DDNS freeze issues
** Fixed Firewall Traffic Rules Source and Destination address field validations
** Started using more stable, builtin ar82xx switch driver
** Symlinking tty devices in one place
** Fixed period when sending packet curl timeouts in Modbus Data Sender
** Fixed "active SIM" register value retrieval after regression in Modbus TCP Slave
** Fixed Hotspot 'Trial access' function
** Fixed OpenVPN TLS Cipher display and added a limit to number of ciphers
** Fixed various WebUI validation bugs, typos & option hints
** Fixed DHCP lease range validation and value saving in Interfaces page
** Fixed error messages when creating interfaces with incorrect names
** Fixed various section toggling bugs
** Fixed username validation in SNMP page
** Fixed certificate file importing bugs & common name display in Certificates Manager page
** Fixed interface option related to IPv4 and IPv6 in Routing pages
** Fixed OpenVPN multi-line command that adds client specific parameters
** Fixed DHCP lease range validation in Basic mode
** Fixed incorrect sorting in dynamic tables
** Fixed routing table writing and deleting
** Fixed incorrectly displayed type when no protocol is selected
** Removed Wireguard interfaces from the Interfaces page
** Fixed SNMP user access mode display in SNMPV3 Users Overview page
** Fixed SNMP memory leak on chilli module
** Fixed MD5 and SHA256 checksum calculations
** Fixed DHCP-options field validation to allow separating parameters with commas
** Fixed Package Manager side menu entry updates right after package upload
** Fixed Wireguard port selection
** Fixed VPN zone status display
** Fixed lua errors when Start/End time option is empty
** Fixed incorrectly displayed OpenVPN protocol
** Fixed Lua errors in Profile Scheduler and Firewall Zones
** Removed <i>/log</i> folder from Troubleshoot file directories
** Fixed endless spinner when applying profiles
** Fixed nil value in the Traffic Logging page
** Fixed "Units" option dependency on "Enable DHCP" option in the Setup Wizard's LAN page
** Fixed redirecting to login page after factory setting restore (reset)
** Removed Unsaved Changes notification when downloading Troubleshoot/tcpdump files from the System → Administration → Troubleshoot page
** Vulnerability fixes for Package Manager and Certificates Manager pages
** Fixed Firewall zone placeholder (removed "-- Please select --" and left "Unspecified")
** Fixed update from server option in the Firmware page
** Added missing error messages when password is invalid in default password change page
** Fixed "Lease time" option in the Setup Wizard's LAN page
** Fixed error 500 when accessing Advanced pages while in Basic mode
** Increased allowed character lengths for MQTT Broker and Data to Server
** Fixed XSS vulnerabilities in package manager and package file upload pages
** Fixed incorrect OpenVPN configuration saving
** Fixed NHRP lua error
** Removed "Wireguard" from Status → Services display if it is not installed
** Fixed crashing issue when getting "SIM slot in use" satus value
** Fixed sending status SMS to other number
** Fixed "Change mobile settings" rule service setting
** Fixed SMS Forwarding To HTTP "URL" option validation
** Fixed Mobile Signal graph data display
** Changed message type from 'error' to 'info' from Auto Reply page
** Fixed manual operator selection validation
** Fixed mobile interface authentication settings reset after selecting auto APN mode
** Fixed libgsm password and serial authorization
** Added workaround for mobile to switch LAN port throughput problem for ath79 target
** Removed unnecessary default Hostname and URL values from GPS pages
** Fixed AVL I/O incorrect option display in input rule configuration 
** Fixed "Enabled" option design in GPS Geofencing page
** Fixed RS232/RS485 configuration saving
** Fixed Firewall rule creation for RS232/RS485 when UDP protocol is selected
** Removed Hotspot 2.0 page

===<b>[[Media:TRB2XX_R_00.02.04.3_WEBUI.bin|TRB2XX_R_00.02.04.3]]</b> | 2020.07.31===

* <b>New features</b>
** Backup archive MD5 & SHA256 checksum calculation to help user identify altered backup archives
** Package signature check to verify that a package comes from Teltonika

* <b>Improvements</b>    
** Updated APN database

* <b>Fixes</b>
** Fixed CVE-2019-17367
** Fixed hiding of configuration pages that users of a specific group don't have read access to
** Fixed firmware upload script

===<b>[[Media:TRB2XX_R_00.02.04.1_WEBUI.bin|TRB2XX_R_00.02.04.1]]</b> | 2020.07.02 ===

* <b>New features</b>
** Added GPS support
** Added 'Mobile Passthrough mode'
** Added mobile signal real-time graph
** Relay control to Call Utilities
** 'Certificates' page for generating and managing TLS certificates
** 'Drag & Drop' support for Overview page tables
** 'Speed Test' feature
** AVL I/O support
** Added JSON formatting option to Data to Server
** Added timeout and keep-connection options to Modbus TCP Slave
** During this release a new package was released - [[TRB245 Package Manager#Available packages|WireGuard]]

* <b>Improvements</b>
** Improved mobile interface creation
** Improved 'Profile Scheduler' with minute accuracy
** Reordered VPN configuration options
** Standardized section header styles
** Unified spelling of dropdown values
** Added information about 'Package Manager' packages before updating firmware
** Updated services management to Status → Services page
** Improved performance of firmware upgrades from server
** Improved security features related to file uploading and HTTP headers
** Changed RAM/flash memory units from MiB to MB
** Updated warning message and lease deletion message for static leasing
** Moved 'Country code' option to general tab
** General web responsiveness improvements

* <b>Fixes</b>
** Power button LED fix
** Fixed SDK firmware compilation
** No longer load the rpcd module
** Removed incorrect SMS character counter from SMS Utilities page
** Fixed symlinking tty devices in one place
** Fixed validations and option saving in OSPF page
** Fixed various element positioning bugs on smaller screens
** Fixed switching to advanced mode notification when accessing non existing pages
** Fixed validations in Traffic Logging page
** Fixed showing failover section only for interfaces with failover rules
** Fixed static leases redirect after saving
** Fixed empty dropdown values in 'I/O juggler' and 'Network Shares'
** Fixed interface IP address validation in DDNS page
** Fixed various spelling mistakes
** Fixed broken address option in the 'Troubleshoot' page
** Fixed dropdown select element double clicking issue
** Fixed basic/advanced mode switching with Microsoft Edge browser
** Fixed firmware upgrading bug when LAN interface with a changed name exists
** Fixed redirecting to the 'Interfaces' page when mode is changed from basic to advanced and user is in the 'LAN' or 'WAN' pages
** Fixed validation of custom header in 'Data To Server' page
** Fixed "Type" option error in Failover page
** Updated username and password validations
** Fixed profile change action in 'I/O Juggler'
** Fixed bidirectional GPIO change feature

===<b>[[Media:TRB2XX_R_00.02.03.1_WEBUI.bin|TRB2XX_R_00.02.03.1]]</b> | 2020.05.15===

* <b>New features</b>
** Responsive WebUI design
** New Access Control window for managing IP access
** Attack Prevention page under Firewall settings
** New IPv6 options in WAN, LAN and VPN pages
** Hotspot Users Management page
** Progressive Web Application support and extra page caching when device is configured with a valid SSL certificate
** OpenVPN configuration file upload functionality
** Unsaved Changes page
** Bridge mode display in Overview page
** Input inversion buttons
** Dynamic switch port display in side widget
** Input/Output manipulator
** Full unicode SMS support
** IO control and status over SMS
** MQTT Publisher: added support to send I/O values
** Ability to install packages stored in backup file
** IP unblock SMS rule
** New Modbus TCP Slave register fields
** New Modbus Alarm redundancy options
** NTPD version 4.2.8p14

* <b>Improvements</b>
** Added HMAC configurations for OpenVPN
** Added AES ciphers support for OpenVPN
** Added MTU and gateway metric to mobile interfaces
** Added DHCP lease range display in the Network → LAN page
** Added warning messages when deleting interfaces/configurations
** Added available FW on server status messages in FW upgrade page
** Added mobile PIN code saving note
** Changed UPnP redirect delete button style
** Changed functionality of reset button in the Firewall → Custom Rules page. Now fully resets to default
** Added hints on all value fields about field validation
** Added pin information for iostatus SMS rule
** Removed modem traps if no modem is present
** Optimized section toggling logic, removing all toggling associated flags required prior optimization
** Standardized section edit page headers in WebUI Services
** Improved the look of error pages and messages
** Updated Wiki links to wiki.teltonika-networks.com
** Disabled 'Clear data limit' button for inactive interfaces
** Reordered menu, moved 'Default configuration' to the Backup page, moved 'Diagnostics' to the Troubleshoot page
** Added credentials input fields to Data to Server
** Changed hint of 'Allow guest" in the Network Shares page
** Updated Periodic Reboot service status in the Services page
** Improved hint for incoming calls option
** Changed OpenVPN LZO option to a dropdown with an extra 'none' option
** Added suggestion to create a profile if there are no profiles created in the Profiles → Scheduler page
** Filtered out unnecessary interfaces ending with _4 _6 in firewall page
** Moved SIM switch to separate page and added check interval and retry count options
** Changed side widget button color to blue to make it more visible
** Added 'Dynamic List' option limit (20 elements)
** Added info message to Events Reporting & Mobile Utilities rules, if selected recipient or sender is a group or no groups are created yet
** Improved stm32 recv message handling
** Modbus TCP test now allows reading more than 125 coils/inputs
** Reworked NTP page, separating general options from NTP specific ones
** Fixed grammar errors in Mobile page

* <b>Fixes</b>
** Added name validation in the Firewall → Port Forward page, fixed custom protocol value selection and display
** Added validation for GRE 'Remote subnet IP' option
** Added missing Mobile Data limit input validation
** Fixed Schedulers' cells to be of equal width
** Fixed uploading backup from lower firmware version
** Fixed SSTP certificate upload function
** Fixed IPsec 'Aggressive' setting value saving in config file
** Fixed bug where GPS NMEA collecting file field wasn't shown when NMEA collecting was enabled
** Fixed LAN settings static lease name validation
** Fixed issue that sometimes caused failures when redirecting to Mobile interface edit page
** Fixed descriptions in Access Control → Security page
** Fixed SMS Utilities GPS coordinates rule error, swapped longitude and latitude in places
** Fixed HTTP login while HTTPS session is still active
** Fixed real time CPU load in the Overview page
** Fixed advanced static routing display for all routes
** Fixed file upload error messages in backup page
** Fixed 'Select' option for Firefox browser
** Fixed RAM usage display in side widget
** Fixed access to non existing pages
** Fixed saving empty message field in Events Reporting rules
** Fixed showing correct APN settings when upgrading with the 'Keep all settings' option
** Fixed Events Reporting send test email page display when email contains 2 new lines in a row
** Fixed phrasing and grammatical mistakes in SMS messages tooltip
** Fixed LAN Overview section display
** Fixed early login page load after reboot or backup upload
** Fixed Package Manager notification display
** Fixed SMS rule display for different devices
** Fixed PPTP and L2TP client configuration creation with same name
** Fixed static route removal if corresponding interface is removed
** Fixed Realtime Graphs → Traffic tab display
** Fixed OpenVPN username and password writing to file
** Fixed time zone sync between Setup Wizard & NTP pages
** Fixed WiFi interfaces table style when no interfaces are present
** Fixed DHCP lease range validation
** Fixed RS232 hardware flow control
** No longer write anything into Events Log when forcing reboot to prevent device hang-up
** Fixed launching stm32 autoflash script at early boot to avoid possible keep settings loss
** Removed certain Events Reporting options on devices that don't have the corresponding functionality
** Fixed recovery from lost connection for MQTT publisher, Modbus MQTT gateway

===<b>TRB2_R_00.02.02</b> | 2020.03.10===

* New features
** Initial TRB245 firmware release