View source for RUT361 Firmware Downloads

{{Template: Networking_rutos_firmware_downloads
<!------------------------DEVICE----------------------->
| name         = RUT361
| series       = RUT361
}}

==Changelog==
<!--NEW_FW-->
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.10/RUT361/RUT361_R_00.07.10_WEBUI.bin RUT361_R_00.07.10]</span></b> | 2024.10.10===
* <b>New</b>
** <b>Network</b>
*** Mobile: added ability to export modem debug and USSD responses to CSV file
*** Mobile: added "hologram" APN for "Hologram" operator
*** Mobile: added "wbdata" APN for "Granite" operator
*** Mobile: added "netw.vp" and "netw2.vp" APNs for "Networth" operator to APN database
*** Wireless: added noise value calculation
** <b>Services</b>
*** AWS IoT Core: added service
*** BACnet: added ability to configure several BIP interfaces, to set network numbers and preconfigure BDT entries for BBMD
*** Console: added service status information display
*** DLMS: added service status information display
*** DNP3 Client: added service status information display
*** DNP3 Outstation: added service status information display
*** Modbus Client: added service status information display
*** Modbus Server: added service status information display
*** Modbus TCP over Serial Gateway: added service status information display
*** MQTT Modbus Gateway: added service status information display
*** OPC UA Client: added service status information display
*** OPC UA Server: added variable "rut_wan_type" which shows if WAN is on a wired or a mobile network
*** OPC UA Server: added service status information display
*** RMS: added SOCKS5 proxy support
** <b>System</b>
*** Certificates: added SCEP certificate generation method
* <b>Improvements</b>
** <b>Network</b>
*** Curl: added unix socket support
*** Firewall: added most options to basic mode for all firewall pages
*** Firewall: added all firewall pages to basic mode
*** Interfaces: increased interface metric maximum value from 10000 to 4294967295
*** Mobile: added "flolive.net" APN for "Telecom Italia", "Telefonica O2" and "Telefonica Movistar" operators to APN database
*** Mobile: changed the default APN for IMS protocol from "VZWIMS" to "IMS" for "Verizon" operator
*** Mobile: fixed an issue where the ICCID was not returned correctly when the SIM card's ICCID ended with letters
*** Mobile: improved 5G NSA CA information display
*** Mobile: improved SIM and eSIM management via LPAC service
*** Multi WAN: added rules table to basic mode
*** Network: improved performance under stateless single-directional traffic (RFC2544)
*** Static Routes: added page to basic mode
*** VRRP: added page to basic mode
*** Wireless: added interface status message when DFS CAC is in progress
*** Wireless: added most options to basic mode
*** Wireless: added SSID creation and deletion to basic mode
** <b>Services</b>
*** DLMS: added meter COSEM object scanning
*** DNP3 Client: made menu names more consistent
*** Hotspot: added "Coova-Chilli-SSID" (28) Vendor Specific Attribute for Radius
*** IPsec: improved 'Remote endpoint' validation to allow '%any', '%any4', '%any6' values and netmask
*** IPsec: added ability to use certificates from Certificate Manager
*** L2TPv3: added Tunnel ID and Session ID validation to avoid creating multiple tunnels with the same parameters
*** Modbus Client: updated Modbus Client menu position
*** Modbus Server: updated Modbus Server menu position
*** Python3: changed python3-light package libraries
*** SMS Utilities: added an option to enable or disable the return of status code message
*** Tinc: added options to set the tunnel's IP address
*** Tinc: added a port option to listen for incoming connections and the ability to specify a port for outgoing connections
*** Wireguard: added tunnel source mode selection
*** Kernel: updated version to 5.15.165
*** Python3: updated version to 3.11.7
*** Strongswan: updated version to 5.9.14
** <b>System</b>
*** Access Control: refactored 'General', 'Security' and 'PAM' Web pages
*** Auto Reboot: added support for multiple hosts/URLs in Ping/Wget Reboot
*** Backup: encrypting backup does not require 7zip package anymore
*** Certificates: split "Let's Encrypt" certificates into multiple files
*** Troubleshoot: added dynamic routes debugging information
*** WebUI: added ability to open new page in new tab without entering user credentials
*** WebUI: improved SDK example application
*** Glib2: updated version to 2.80.5
*** Ncurses: updated version to 6.5
* <b>Fix</b>
** <b>Network</b>
*** Firewall: fixed automatic priority option change
*** Mobile: fixed hang up of QMI WDS service
*** Mobile: fixed QMI errors when multi APN is configured
*** Mobile: fixed typo in "m2m.airinternet.eu" APN for "Airinternet" operator in APN database
*** Network: fixed mobile Bridge/Passthrough mode not working after changing LAN interface settings
*** Wireless: fixed BSSID show for interface in Client mode
*** Wireless: fixed hostapd ubus call timeout after wireless configuration change
*** Wireless: fixed reporting disconnection from external AP when device in STA+AP mode
*** Wireless: fixed missing rx frame types needed for wifi scanner
** <b>Services</b>
*** BACnet: fixed communication issues between the ports
*** BACnet: added all available default baud rates
*** BGP: fixed AS field to allow duplicate values
*** BGP: fixed Access list filters not applying fully
*** DLMS: added all available default baud rates
*** DMVPN: fixed DMVPN GRE instance disappearing when creating new IPsec instance
*** DNP3 Client: removed unnecessary max length display for test response field
*** DNP3 Client: renamed TCP Station to TCP Client in the API documentation
*** DNP3 Client: added all available default baud rates
*** DNP3 Outstation: added all available default baud rates
*** GRE: fixed interface not showing up in OSPF and RIP selections if it is off
*** Hotspot: fixed blocklist not working when no addresses are provided
*** Hotspot: fixed uploaded custom landing page file permissions
*** Hotspot: fixed certificates to be required to enable https redirect
*** IPsec: fixed IP rule not appearing after network restart
*** IPsec: fixed duplicate port values in IPsec firewall rules
*** Ledman: fixed issue when power LED turns off when rebooting device
*** Modbus Client: added all available default baud rates
*** Modbus Client: added missing API docs for Modbus test request
*** Modbus Server: added all available default baud rates
*** Modbus Server: fixed firewall rule staying enabled when app is disabled
*** Modbus Server: fixed firewall rule creation
*** OpenVPN: fixed the configuration after disabling the use of external services
*** OpenVPN: fixed OpenVPN restarting when mobile interface comes up
*** SNMP: fixed Hotspot OIDs' hssID and hssUsername display
*** Tinc: fixed adding routes to remote subnets
*** Tinc: fixed configuration generation issues when creating multiple network and host instances
*** Tinc: fixed issues with route creation when using IPv6 addresses in tunnel configuration
*** Tinc: fixed validation for uploading key files
** <b>System</b>
*** Backup: fixed uploading backup with memory expansion enabled
*** CLI: fixed some private IPs being incorrectly determined as public
*** JSON-RPC: fixed login "Access Denied" error
*** WebUI: added API required values validation when enabling BACnet, DLMS, DNP3, Modbus, MQTT, NTRIP services
*** WebUI: fixed 'Memory' status card progress bars visuals
*** WebUI: fixed search bar suggestions after removing packages
*** WebUI: fixed showing data in modals for users with only read permissions
*** WebUI: fixed custom SDK pages not loading correctly
* <b>CVE Patches</b>
** CVE-2021-3520
** CVE-2021-44540
** CVE-2021-44541
** CVE-2024-4032
** CVE-2024-6119
** CVE-2024-6232
** CVE-2024-6923
** CVE-2024-7264
** CVE-2024-42225
----
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.9.4/RUT361/RUT361_R_00.07.09.4_WEBUI.bin RUT361_R_00.07.09.4]</span></b> | 2024.10.02===
* <b>Improvements</b>
** <b>Services</b>
*** NTP Client: changed default NTP servers
* <b>Fix</b>
** <b>Services</b>
*** NTP Client: fixed NTP server usage to work with next in line server if current server does not respond
----
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.9.3/RUT361/RUT361_R_00.07.09.3_WEBUI.bin RUT361_R_00.07.09.3]</span></b> | 2024.09.27===
* <b>Fix</b>
** <b>Network</b>
*** Multi WAN: fixed ipsets not getting deleted correctly when Multi WAN gets restarted
----
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.9.1/RUT361/RUT361_R_00.07.09.1_WEBUI.bin RUT361_R_00.07.09.1]</span></b> | 2024.09.13===
* <b>Improvements</b>
** <b>Services</b>
*** Python3: updated version to 3.11.7
* <b>Fix</b>
** <b>Network</b>
*** Mobile: fixed eSIM profile config generation
----
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.9/RUT361/RUT361_R_00.07.09_WEBUI.bin RUT361_R_00.07.09]</span></b> | 2024.09.03===
* <b>New</b>
** <b>Network</b>
*** Firewall: added ability to configure NAT rule action
*** Firewall: added additional TTL target for firewall rules
*** Mobile: added "datamobile.ag" APN for "Datamobile.ag" operator to APN database
*** Mobile: added "m2m.ajrinternet.eu" APN for "Airinternet" operator to APN database
*** Mobile: added "wbdata" APN for "Webbing" operator to APN database
*** Mobile: added "inetd.vodafone.iot" APN for "Vodafone" operator to APN database
*** Mobile: added "asm" APN for "ASM" operator to APN database
*** Realtime Traffic: added historical traffic charts
*** Realtime Traffic: added overall quality measurement to wireless signal charts
*** Wireless: added option to enable 802.11w Management frame protection when using non-WPA3 encryption
** <b>Services</b>
*** Events Reporting: added new firmware version notification event
*** SNMP: added Multiwan data module
** <b>System</b>
*** WebUI: added notifications menu
* <b>Improvements</b>
** <b>Network</b>
*** Mobile: improved network bring up after operator scan
*** Mobile: updated bands selection to include band number and frequency
*** Mobile: improved SIM card notifications to get removed when SIM card state or active SIM changes
*** Mobile: improved modem update notifications to show modem name
*** Mobile: removed the USSD feature from the data-only modems
*** Ports Settings: added more PoE state symbols, colored disabled port differently and improved port status hint
*** Realtime Traffic: improved chart styles
*** Wireless: increased EAP authentication logging
*** Wireless: added various validations for network that is being used by wireless interface
*** Wireless: added insecure configuration warnings when configuring SSIDs
*** Wireless: updated wireless cards to display each radio device's signal quality and band data
*** Wireless: reduced time required for Fast Transition in STA mode
** <b>Services</b>
*** Call Utilities: added check if the number is blocked before doing action
*** Data to Server: added warning messages about insecure certificates for http_certfile and mqtt_certfile options in API and WebUI
*** DLMS: added SHA256 authentication
*** DLMS: improved COSEM group enable validation
*** GRE: reduced GRE keepalive packet buffer size
*** Hotspot: increased throughput performance
*** Hotspot: increased maximum length of 'Local users' username to 255 characters
*** Hotspot: added walled garden allowlist and blocklist
*** IPsec: added support for route based tunnel
*** L2TP: added field for custom options
*** SMPP: added timeout option
*** Web Filter: added hostname count message after successful file upload
** <b>System</b>
*** Access Control: improved system user's access control rules logic
*** Access Control: added option to disable password auth for the root user
*** Administration: improved write/read access control options display to match meniu path style
*** Backup: improved backup page by splitting it into backup and reset settings page
*** Side Widget: added port status widget
*** Update Firmware: changed firmware update log to include firmware version
*** WebUI: updated firmware and backup verification pages design
*** WebUI: improved global alerts display
*** WebUI: added confirmation prompt for disabling service in side widget
*** Kernel: updated version to 5.15.162
* <b>Fix</b>
** <b>Network</b>
*** Devices: fixed configured VLAN 0 device cannot be selected in interface physical settings configuration
*** Mobile: fixed data limit widget to show used data for inactive interface
*** Mobile: fixed Bridge/Passthrough modes for routed networks
*** Mobile: fixed incorrect date values when setting SMS limit
*** Mobile: fixed SINR display for EG060K module
*** Mobile: fixed SMS used data header counter
*** Mobile: fixed the issue where the PUK event was not displayed when the SIM PIN was blocked
*** Mobile: fixed uqmi start-network authentication issue
*** Mobile: fixed modem info not being filled on devices with more than one modem
*** Mobile: fixed mobile data limit to calculate correct used limits when using ipv4 and ipv6 simultaneously
*** Mobile: fixed USSD over IMS error handling
*** Mobile: fixed an issue where the interface could hang if the modem was busy
*** Network: fixed Ethernet switch port state change tracking logic
*** Network: fixed incorrect date values when setting data limit
*** RelayD: fixed relayd assigning wrong interface to zone
*** Wireless: fixed station mode connection issues for 2.4 GHz radio in STA+AP mode
*** Wireless: fixed wireless status API response to contain separate interface information for multiple radio configurations
** <b>Services</b>
*** Azure IoT Hub: fixed the Azure IoT Hub deprecated endpoint to create Data to Server sections
*** Azure IoT Hub: fixed the Azure IoT Hub deprecated endpoint so that it does not create sections in GET request
*** Azure IoT Hub: fixed the deletion of Data to Server sections when an Azure IoT Hub section is deleted through the deprecated endpoint
*** DLMS: fixed OBIS code validation
*** Hotspot: fixed 'Hotspot network' input validation to only allow network mask from 16 to 30
*** Input/Output: added I/O juggler reload when I/O pin direction is changed
*** OPC UA Client: fixed TCL file upload
*** OPC UA Server: fixed TCL file upload
*** OPC UA Server: fixed configuration migration
*** OpenVPN: fixed default firewall zone for tap interfaces
*** SNMP: fixed TELTONIKA-MIB wireless module crash
*** SNMP: fixed mobile network state display
*** SNMP: fixed default hssDwLimit, hssUpLimit, hssDwBandwidth and hssUpBandwidth values
** <b>System</b>
*** API Core: fixed file deletion
*** Boot: fixed Teltonika logo in httpd recovery page when using Firefox
*** Package Restore: fixed automatic package re-installation after firmware upgrade
*** Troubleshoot: fixed troubleshoot not including all the log files when log to flash is enabled
*** User Settings: fixed page to show groups and users if the user has been granted access
*** WebUI: fixed overview page to display active wireless (WLAN) clients
* <b>CVE Patches</b>
** CVE-2021-32292
** CVE-2022-40617
** CVE-2023-49441
** CVE-2024-0397
** CVE-2024-3596
** CVE-2024-5535
** CVE-2024-8088
** CVE-2024-26669
** CVE-2024-26739
** CVE-2024-26740
** CVE-2024-36901
----
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.8.2/RUT361/RUT361_R_00.07.08.2_WEBUI.bin RUT361_R_00.07.08.2]</span></b> | 2024.08.12===
* <b>Fix</b>
** <b>System</b>
*** Update Firmware: fixed inconsistent firmware download from FOTA
----
===<b>RUT361_R_00.07.08.1</b> | 2024.08.06===
<b>Note:</b> This firmware version was removed due to an issue with FOTA firmware download.
* <b>Improvements</b>
** <b>Network</b>
*** Mobile: improved firmware downgrade validation for Quectel modules
** <b>Services</b>
*** Zerotier: updated version to 1.14.0
* <b>Fix</b>
** <b>Network</b>
*** Mobile: fixed an issue where in some cases mobile network interfaces would not be brought down properly
*** Mobile: fixed memory fault while allowlist and denied data roaming enabled
*** Network: fixed default route not being added for PPPoE connections
** <b>Services</b>
*** OPC UA Client: fixed connections not being closed after using testing functionality
** <b>System</b>
*** WebUI: fixed SDK WebUI package compilation
----
===<b>RUT361_R_00.07.08</b> | 2024.07.18===
<b>Note:</b> This firmware version was removed due to an issue with FOTA firmware download.
* <b>New</b>
** <b>Network</b>
*** DNS: added inherited server status to configuration page
*** HTTPS DNS Proxy: added new HTTPS DNS Proxy package to package manager
*** Mobile: added SIM card lock/unlock functionality in Mobile->Utilities page
*** Mobile: added SIM card PIN change functionality in Mobile->Utilities page
*** Mobile: added new Mobile->Limits page which shows information and allows to configure Data and SMS limits
*** Mobile: added DFOTA support for RG520N modems
*** Mobile: added nr-arfcn display to mobile status page
*** Mobile: added dfota support for devices with RG520N-EB modem
** <b>Services</b>
*** Data to Server: added 'Lua script' data input
*** Hotspot: added Single Sign-on (OIDC) authentication mode
*** Hotspot: added Walled Garden blocklist functionality
*** Input/Output: added ability to configure gpio debounce timer and changed default gpio debounce timer value from 200 ms to 10 ms
*** IPsec: added initial XFRM support
*** MQTT Modbus Gateway: added JSON message type format
*** OpenVPN: added DCO support
** <b>System</b>
*** API Core: added option to configure api session timeout
*** Certificates: added "Let's encrypt" certificate generation
*** PAM: added RADIUS external user support
*** UI Core: added data analytics support
*** Update Firmware: added warning message about device being temporarily unreachable on firmware update
* <b>Improvements</b>
** <b>Network</b>
*** DNS: separated field "DNS forwardings" into two: one for simple server forwarding other for domain-specific
*** DNS: moved "DNS Forwardings", "Listen interfaces", "Exclude interfaces", "Local service only", options to advanced tab
*** Firewall: improved protocol field in all firewall pages by making that "All" value would be mutually exclusive with any other value
*** Mobile: improved IMS context initialization
*** Mobile: updated SMS memory management for multipart SMS
*** Mobile: added error message when attempting to enable the SIM switch without any criteria set
*** Mobile: added informative message in SIM switch page when Data/SMS limit criteria are enabled but the limits themselves are not set up
*** Mobile: moved operator list allowlist/blocklist selection to Network selection page
*** Mobile: refactored Scanned operators modal, added repeat scan button
*** Mobile: added ability to view previously scanned operators in Network selection and Operator lists pages
*** Mobile: added ability to edit operator list name and initiate scans for operators in Operator lists page
*** Mobile: updated operator code field list to include APNs from the APN database in Operator lists page
*** Mobile: split Mobile->General page into three pages: General, Connection and Utilities pages
*** Mobile: added mobile interface with highest priority APN configuration in Mobile->General page
*** Mobile: added icons with hints which show SIM card, operator, data connection statuses in Mobile->General page
*** Mobile: moved Mobile data limit section to a tab in WAN page
*** Mobile: added informative message in WAN page to indicate whether the connection will be made using APN from APN database, empty or custom APN
*** Mobile: improved logging of ping error messages
*** Mobile: added 5G SA/NSA mode selection
*** Mobile: improved modem updater to stop ping reboot service while update is in progress
*** Mobile: improved the handling of denied messages upon SIM switch
*** Mobile: added notification when a multi-IMSI SIM card is using Auto APN
*** Mobile: added validation to not allow passthrough and bridge mode when one already exists
*** Mobile: improved safeguards for modem services startup
*** Mobile: improved modem update status display
*** Mobile: added corrupted mobile statistics database restoration functionallity
*** Mobile: improved setting of IPv4 and IPv6 types inside the modules
*** Mobile: improved provider name parsing for SLM750 modem
*** Multi WAN: improved interface status representation when using load balancing
*** Network: added more options for "IPv6 assignment length" field
*** VLAN: added ability to configure VLAN 0
*** Wireless: added warning when user configures mesh on radio with automatic frequency channel
*** Wireless: added support for wireless MAC-filter MAC ranges
*** Wireless: changed Radius Accounting port is not required when configuring access point with enterprise encryption
*** Wireless: refactored radio configuration page layout
*** Wireless: refactored assignment of wireless interfaces MAC addresses, STA interface will always use fixed address
** <b>Services</b>
*** Azure IoT Hub: added DPS symmetric key attestation support
*** Azure IoT Hub: added Direct Method support
*** Azure IoT Hub: added Plug and Play integration
*** Azure IoT Hub: added link to "Data to Server" page
*** Data to Server: added support for multiple filters
*** Data to Server: improved HTTP output hostname definition with automatic protocol specification in URL
*** Data to Server: improved MQTT input connection handling
*** DNP3 Client: added option to enable/disable service
*** Dynamic DNS: added Lookup hostnames support
*** GRE: increased Inbound and Outbound key limit to 4294967295
*** Hotspot: adjusted hotspot user manager page to display active and inactive user sessions
*** Hotspot: changed local users to be stored with other types of users
*** Hotspot: added 'noc2c' option for enabling client isolation, option is enabled by default
*** Input/Output: added custom name support in I/O status page
*** IPsec: added certificate warning message
*** Mobile Utilities: added interface option to sms_utils cellular command
*** Mobile Utilities: improved error log message
*** Mobile Utilities: improved naming of I/O pins in initial I/O status rule
*** Mobile Utilities: sms utilities authentication brute force prevention
*** Modbus Server: added mobile last month and last week usage registers
*** Mosquitto: added large package size check for MQTT clients
*** MQTT Modbus Gateway: improved mosquitto reconnect time and service will try to recover few times before exiting
*** MQTT Publisher: improved MQTT connection handling
*** OPC UA Client: added security modes
*** OPC UA Server: added security modes
*** OPC UA Server: added service status display
*** OpenVPN: added support for decrypting private key when uploading a configuration file
*** OpenVPN: improved instance status state
*** OpenVPN: added options to specify an IP address pool for dynamic assignment to clients
*** SMPP: added brute-force prevention
*** SMPP: added TLS/SSL support
*** SMS Utilities: added security warning in "Authorization method" configuration
*** SNMP: changed interface module OID structure
*** SNMP: improved User-based Security Model (USM) brute force attack prevention measures
*** Stunnel: improved global instance settings dependencies
*** emailrelay: updated version to 2.4.1
*** OpenVPN: updated version to 2.6.9
*** stunnel: updated version to 5.72
** <b>System</b>
*** Access Control: added certificate key length warnings
*** Access Control: adjusted access control when all pages are blocked
*** Access Control: added certificate file download for CLI to work on all browsers
*** API Core: implemented functionality to include warning messages for vulnerable certificates
*** Boot: improved modem startup reliability
*** Package Manager: added multi package actions
*** Package Manager: added status filter
*** Package Manager: moved package upload action to main page
*** Package Manager: added links to installed packages pages
*** Package Manager: refactored "Packages" page
*** Package Manager: updated opkg repository link to use https
*** RutOS: improved GPL example page to align with new software architecture
*** Troubleshoot: refactored Modem debug section to display responses in single field, added clear button to remove received responses
*** Troubleshoot: added support for multiple syslog servers
*** UI Core: added additional message with IP address to loading screen for scenarios when redirect to different IP address happens
*** UI Core: added toast message hiding when text is too long
*** Update Firmware: added 'Firmware version' data in screen after firmware upload
*** WebUI: added functionality to cancel loading screen if it takes 30 or more seconds
*** WebUI: removed all ubus method calls from webui
*** WebUI: improved language caching
*** WebUI: added password generator for first login modal
*** WebUI: added sticky position to side menu
*** WebUI: added default password hint to login error message
*** WebUI: added warning messages for low-security certificates
*** Kernel: updated version to 5.15.159
*** libexpat: updated version to 2.6.2
*** SSL/TLS: updated version to 3.0.14
*** vue: updated version to 3.4
* <b>Fix</b>
** <b>Network</b>
*** Channel Analysis: fixed network list not being updated if a single scan fails
*** Devices: fixed missing API devices status endpoint permission
*** DHCP: fixed "DHCP option" allow empty input value
*** DHCP: fixed IPv4 leases being not correctly shown when NTP synchronizes time
*** DHCP: fixed DHCP error that occurred after changing the subnet of the LAN IP address in the setup wizard
*** Dynamic routes: fixed duplicated external routes cards
*** Firewall: fixed firewall zone validation when adding interfaces
*** Mobile: fixed low signal reconnect being available on modems where it is not supported
*** Mobile: fixed gsmctl -E output to return only json values
*** Mobile: fixed Carrier Aggregation signal strength info
*** Mobile: fixed wrong mobile data limit used data format for sms messages
*** Mobile: fixed duplicate data connection event reporting
*** Mobile: fixed an issue where low signal notifications were displayed without a SIM card
*** Mobile: fixed modem serial number acquisition after modem reboot
*** Mobile: fixed an issue when 4G-only network type selection may have resulted in a slower connection to the operator
*** Mobile: fixed issue where USSD responses were returned in HEX format instead of text format for EC200A module
*** Mobile: fixed issue where DHCP filter was not set correctly for RG501Q
*** Mobile: fixed an issue where the wrong IP address was used after a DFOTA upgrade
*** Multi AP: fixed Multi AP not working with fast roaming
*** Multi AP: fixed switching to Multi AP mode fails due to encryption
*** Multi AP: fixed Multi AP configuration being deleted when switching mode on the same radio device
*** Network: fixed overriding MAC address for interfaces that are bridged
*** Realtime Traffic: fixed mobile usage by week day translation by device language
*** RelayD: fixed API error when "network" and "lan_mark" options are not present in a PUT request
*** SQM: fixed missing PPP mobile device selection in SQM configuration
*** Wireless: fixed wireless scan results sometimes not being returned
*** Wireless: fixed wireless status page not updating wireless SSID status after page is opened
*** Wireless: removed the ability to have different countries in radio configurations
*** Wireless: fixed interface delete when it's unassigned from the wireless interface in access point mode
*** Wireless: fixed backticks for WiFi SSID are not allowed in WebUI
** <b>Services</b>
*** BACnet: fixed incorrect BACnet IP port used for sending responses
*** BGP: fixed route map sequence going out of range
*** BGP: fixed listen range field allowing multiple entries
*** Call Utilities: fixed table header switch to be disabled if no rules were created
*** DLMS: fixed DLMS test response format
*** DLMS: fixed COSEM group validation
*** DLMS: fixed API POST error for /dlms/devices/config endpoint
*** DLMS: fixed serial connection not working after reboot
*** DNP3 Client: fixed to allow reading objects past 255 index
*** DNP3 Client: fixed incorrect hints
*** DNP3 Outstation: fixed serial outstation starting issues
*** Hotspot: fixed uploading more than one custom theme
*** Hotspot: fixed creating Hotspot to SSID that is disabled
*** Hotspot 2.0: fixed Venue name and Operator's name field validations
*** I/O Juggler: fixed improper dout action config handling
*** I/O Juggler: updated profile change action
*** Input/Output: allow unselecting all Post/Get access methods
*** IPsec: fixed connectivity issues when using WAN failover
*** IPsec: fixed the instance status when the local firewall option is disabled
*** Ledman: fixed issue when after some time network type LED starts blinking
*** Modbus Client: fixed test request option validation
*** Modbus Client: fixed alarm output action display values
*** Modbus Client: fixed incorrect period hint
*** Modbus Server: fixed APN register not clearing APN
*** Modbus Server: fixed 148 and 164 modbus registers
*** Modbus Server: fixed incorrect hints
*** OPC UA Server: fixed not starting while modem is down
*** OpenVPN: fixed displaying imported files from device
*** OpenVPN: fixed the private key decryption for cases when a password is used
*** OpenVPN: fixed data cipher migration
*** SMPP: fixed username bypass problem
*** SMPP: fixed password validation
*** SMS Gateway: fixed SMS to Email recipient formatting according to RFC5322
*** SNMP: fixed GSM mSignal OID value type
*** SNMP: fixed GSM module memory leaks
*** SSTP: fixed functionality when the default route option is not enabled
*** Web Filter: fixed whitelist not working for some hosts when using IPv6
** <b>System</b>
*** Administration: fixed repeated validation on cleared inputs and added validation when new password matches the old one
*** API Core: fixed API method validation during upload action
*** API Core: fixed error messages for POST method
*** API Core: fixed option list validation
*** Boot: fixed factory settings restore (firstboot) not deleting hidden files
*** Events Log: fixed refresh button in event log table
*** IP Block: fixed adding MAC addresses back to whitelist when unblocking all of them
*** Recipients: made phone number field required
*** Setup Wizard: fixed lan ip step not changing ip address
*** Troubleshoot: fixed system log and kernel log buttons to be enabled with read only rights
*** Update Firmware: fixed misleading "Firmware version" status of "N/A" to "FOTA service is disabled" when FOTA is disabled
*** Update Firmware: fixed issue when infinite spinner appears after updating device firmware from server without having internet connection
* <b>CVE Patches</b>
** Patched CVE-2023-52425
** Patched CVE-2023-52530
** Patched CVE-2024-25629
** Patched CVE-2024-28757
----
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.7.3/RUT361/RUT361_R_00.07.07.3_WEBUI.bin RUT361_R_00.07.07.3]</span></b> | 2024.06.25===
* <b>Fix</b>
** <b>Network</b>
*** WebUI: fixed port advertisement change
** <b>System</b>
*** FOTA: fixed config when upgrading from older firmware with keep settings
* <b>CVE Patches</b>
** CVE-2024-31950 
** CVE-2024-31951
----
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.7.2/RUT361/RUT361_R_00.07.07.2_WEBUI.bin RUT361_R_00.07.07.2]</span></b> | 2024.06.12===
* <b>Improvements</b>
** <b>Network</b>
*** Zerotier: added backup WAN interface blacklisting if WAN failover is enabled
*** Mobile: improved communication stability with eSIM
** <b>Services</b>
*** SNMP: added bruteforce attack prevention when using SNMP v3 user
*** L2TP: improved reconnect attempt logic
*** Wireless: removed unnecessary information from system logs
** <b>System</b>
*** SSH: removed weak SSH algorithms
*** Telnet: moved to Package Manager
* <b>Fix</b>
** <b>Network</b>
*** BGP: fixed instance migration issues
*** Mobile: fixed a SIM detection issue
*** Mobile: fixed forced APN configuration
** <b>Services</b>
*** DMVPN: fixed duplicate NHRP map entries creation
*** OpenVPN: added fixes for the insecure tls-cert-profile option usage
** <b>System</b>
*** IP Block: fixed blocking of UDP traffic
*** Ledman: fixed WiFi LED indication when WiFi configuration is changed
*** Uboot: fixed firmware recovery update via uboot on Windows
* <b>CVE Patches</b>
** CVE-2024-31948
----
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.7.1/RUT361/RUT361_R_00.07.07.1_WEBUI.bin RUT361_R_00.07.07.1]</span></b> | 2024.05.03===
* <b>New</b>
** <b>Network</b>
*** WebUI: added ESM/EMM message notifications
*** WebUI: added internet status tracking configuration and overview widget
*** LAN: added a new IPv6 LAN status page
*** Static Leases: added a new IPv6 Static Leases page
*** WebUI: added custom domain name resolve option in “DNS” configuration page
*** Auto APN: added “uno.au-net.ne.jp” APN for “KDDI” operator
*** Auto APN: added 'eprivate010.tisparkle.com' APN for “Sparkle” operator
*** QoS: added mobile interface select option
*** Mobile: improved connection establish time for uqmi protocol
*** Failover: added additional connection flush options
*** Wireless: added auto-reconnect disable functionality
*** Wireless: added ability to use PKCS#12 certificates for EAP-TLS authentication
*** VRF: added initial Virtual Routing and Forwarding support
** <b>Services</b>
*** Post/Get: added I/O invert support
*** DLMS Client: added persistent TCP connections
*** Events Reporting: added unexpected shutdown event
*** Modbus Client: added 64bit data types
*** IPerf3: added iPerf3 to Package Manager
*** DNP3 Outstation: added I/O objects
*** TR-069: added PCI, LAC, TAC, EARFCN and Neighbour cells data to Device.MobileInfo node
*** Hotspot: added domain and subdomain options for external landing page
** <b>System</b>
*** WebUI: added the ability to generate random passwords for password input fields
*** WebUI: added reset to “Factory defaults” option
*** System: changed firmware certificate verification tool
*** IP Block: added time-based login attempt blocking
*** WebUI: added firmware update notification support
*** PAM: added the ability to set port for TACACS+
*** Logging: added multiple remote syslog servers support
* <b>Improvements</b>
** <b>Network</b>
*** Static Leases: added possibility to use MAC with wildcard
*** WebUI: added ability to disable modem update notifications
*** Topology: changed network devices scanning application
*** WebUI: improved design of Status - LAN page
*** DHCP: simplified DHCP configurations in other pages and moved full DHCP configuration to a separate page
*** DHCP: removed default disabled server configuration for WAN interface
*** WebUI: simplified data entry of DNS forwardings by separating hostname and IP address fields
*** BGP: added Virtual Routing and Forwarding (VRF) support
*** BGP: added multiple BGP instance support
*** WebUI: adjusted responsive design breakpoints
*** WebUI: added additional field for warning threshold to allow entering value as percentage in Mobile Data Limit section
*** Mobile: improved mobile services stability when SIM card is lost during SMS sending
*** Mobile: updated bridge/passthrough mode logic to flush ARP and add static ARP entry if MAC is specified
*** Mobile: improved SIM switch logging and protection on failure to acquire data
*** MWebUI: added partial data loading to APN database page
*** Mobile: improved SMS sending timeouts during network issues
*** Mobile: improved connection handling when data limit is reached
*** Mobile: added metric to default gateway when using passthrough mode
*** WebUI: added validation for 2 same APNs
*** WebUI: updated Band selection field to show duplex modes in Mobile General page
*** WebUI: added an information icon and disabled delete button for wireless instance when it is associated with a hotspot interface
*** Wireless: improved hidden AP handling when showing scan results
*** Dnsmasq: updated dnsmasq to version 2.89
** <b>Services</b>
*** Wireguard: added option to bind tunnel to a specific interface
*** OPC UA Client: added limits (10 servers, 20 groups, 50 nodes per server, 50 values per group)
*** DLMS Client: increased maximum count of connection sections to 30
*** DLMS Client: added short name referencing
*** SNMP: set strict default community access when IPv6 address is used
*** SNMP: improved sysName OID to set device's hostname
*** Auto Reply: added available SMS message parameters to "Message text" input
*** Modbus Client: allow using diacritics in SMS alarms
*** Hotspot: moved MAC blocking option from Access Control to Hotspot page
*** WebUI: added MAC authentication support when using RADIUS authentication mode
*** WebUI: moved licenses to footer
*** OpenVPN: added the bridge option for selecting the network device to be bridged with
*** OpenVPN: added possibility to create more than one TAP client
*** SSTP: updated package version to 1.0.19
*** Mosquitto: updated package version to 2.0.17
** <b>System</b>
*** WebUI: added more strict password requirements for restoring backup
*** SMTP: added option to either not verify SMTP server or upload SMTP server's CA file to verify authenticity
*** WebUI: Added the ability to choose the ROOT CA when using certificates from the device
*** WebUI: unified time format to ISO8601 across the entire WebUI
*** WebUI: added ability to choose imported certificate and key as 'Server certificate' and 'Server key' in 'Access Control'
*** WebUI: added 'Hosts' and 'IP Addresses' options for 'Simple' certificate generation and certificate signing
*** WebUI: changed firmware update option to server as a default option
*** WebUI: improved first login password change logic
*** Certificates: updated Root CA certificates
*** GPL: added offline package preparation command for GPL builds
*** Speedtest: added multiple connections support to improve accuracy
*** Kernel: updated to version 5.15.149
*** Libcap: updated package version to 2.69
* <b>Fix</b>
** <b>Network</b>
*** Topology: fixed showing interfaces with assigned VLAN
*** WebUI: fixed static routing creation for GRE instance
*** Network: fixed DHCPv4 relay mode enabling
*** Mobile: fixed PIN code set after modem restart
*** Mobile: fixed an issue where using SIM change command on one SIM slot modems would reset connection
*** Mobile: fixed an issue where message storage would not be checked correctly
*** Mobile: fixed temperature value sometimes returning 0
*** Mobile: fixed denied roaming flag set
*** Failover: fixed Failover missing active rules when using multiple source and destination IP addresses
*** Failover: fixed an issue where failover would not function correctly while using a mobile interface
*** WebUI: fixed network and failover interface metric sorting synchronization issue
*** WebUI: fixed failover rule policy save issue with newly added WAN interface
*** Interfaces: fixed failover value for new WAN being taken from WAN that was just deleted
*** Wireless: fixed Wifi Scanner not saving scanned WiFi SSIDs
*** Wireless: fixed missing CCMP-256 and GCMP-256 cipher types in scan results
*** Wireless: fixed missing GCMP-256 cipher when using WPA3-EAP encryption in Client mode
*** Wireless: fixed skipped MAC address value for interface in Client mode
*** Wireless: fixed scanning issue when connected via the same network
*** Wireless: fixed mesh functionality
*** Wireless: fixed missing signal strength value on Client interfaces
*** Wireless: fixed Client interface taking excessive time to connect after boot
*** Wireless: fixed missing EAP authentication in Client mode
*** WebUI: fixed mesh nodes not being shown in Status->Wireless->Interfaces page
*** WebUI: fixed proposed configuration settings when connecting to a mesh point network
*** Wireless: fixed connected wireless clients being shown duplicated
*** MultiAP: fixed client not switching to another AP if incorrect password was provided
** <b>Services</b>
*** Modbus Client: allow using negative floating point values in requests
*** Azure IoT Hub: fixed Data to Server minor WebUI dependency bugs
*** Data to Server: fixed DLMS data formating
*** Data to Server: fixed Network link state data display
*** DLMS Client: fixed segfault while reading profile generic COSEM object
*** DLMS Client: fixed profile generic entries reading
*** DLMS Client: fixed application memory allocation issues
*** SSTP: fixed route adding when default route is enabled
*** SNMP: fixed VLAN OID naming
*** OpenVPN: added fixes for instance status tracking functionality
*** OpenVPN: resolved uptime counting issues
*** Azure IoT Hub: fixed 'contentType' telemetry message parameter
*** Hotspot: fixed password validation for locally created users and signed-up users
*** Hotspot: fixed session invalidation after deleting registered user
*** Hotspot: fixed SMS OTP password reuse
*** Hotspot: fixed firewall rule creation
*** PPTP: fixed problem related with routes when failover is enabled
*** Modbus Client: fixed issue where service freezes when SMS alarm is sent
*** WebUI: fixed data loading error in Input/Output > Post/Get page
*** PPTP: fixed PPTP instance deletion problem
*** UPnP: updated package version to 2.3.4
** <b>System</b>
*** NTP Client: fixed ‘Count of time synchronizations’ execution when synchronization to mobile operator is chosen
*** Package Manager: fixed spinner message when restarting network after package upload or download
*** Package Manager: fixed supported devices check when installing a package from server
*** WebUI: fixed language install from uploaded package after upgrade with keep settings
*** WebUI: fixed an issue when a user was not logged out after changing profiles
*** Telnet: fixed segmentation fault during concurrent connections
*** CLI: fixed enter key issue on mobile chromium based browsers
*** System Users: fixed SSH session close after deleting user or disabling SSH access
*** Profiles: fixed profile migration with installed packages
*** WebUI: fixed Hotspot log page table search functionality
*** Speedtest: fix missing download speed on some servers
*** PAM: updated libpam to version 1.6.0
* <b>CVE Patches</b>
** CVE-2022-4603
** CVE-2022-23308
** CVE 2022-45061
** CVE-2023-0466
** CVE-2023-6129
** CVE-2023-7042
** CVE 2023-24329
** CVE 2023-27043
** CVE-2023-42366
** CVE-2023-46218
** CVE-2023-46219
** CVE-2023-46752
** CVE-2023-46753
** CVE-2023-48795
** CVE-2024-2397
** CVE-2024-25062
** CVE-2024-27913
** CVE-2024-22365
----
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.6.10/RUT361/RUT361_R_00.07.06.10_WEBUI.bin RUT361_R_00.07.06.10]</span></b> | 2024.04.04===
* <b>Fix</b>
** <b>System</b>
*** Ledman: fixed memory leak
----
===<b>RUT361_R_00.07.06.8</b> | 2024.03.25===
----
<b>Note:</b> Firmware <b>R_00.07.06.8</b> was removed due to an issue with inefficient memory allocation for LED control.
* <b>Improvements</b>
** <b>Services</b>
*** IPSec: disabled libgmp in favor of openssl
*** IPSec: updated Strongswan to 5.9.6
* <b>Fix</b>
** <b>Services</b>
*** IPSec: increased charon load timeout
*** IPSec: fixed loading of large private keys
----
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.6.6/RUT361/RUT361_R_00.07.06.6_WEBUI.bin RUT361_R_00.07.06.6]</span></b> | 2024.03.04===
* <b>New</b>
** <b>Services</b>
*** Added domain and subdomain options for external landing page in Hotspot
* <b>Improvements</b>
** <b>System</b>
*** Minified *.svg WebUI files to save space on the device
*** Removed unused easy-rsa package to increase free space
* <b>Fix</b>
** <b>Network</b>
*** Fixed mobile daily data usage representation
*** Fixed the issue with Wireless bgscan functionality not operating correctly
----
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.6.5/RUT361/RUT361_R_00.07.06.5_WEBUI.bin RUT361_R_00.07.06.5]</span></b> | 2024.02.21===
* Initial FW release for the RUT361 device