View source for TRB500 Firmware Downloads

{{Template: Networking_rutos_firmware_downloads
<!------------------------DEVICE----------------------->
| name         = TRB500
| series       = TRB500
}}

==Changelog==
<!--NEW_FW-->
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.10/TRB500/TRB500_R_00.07.10_WEBUI.bin TRB500_R_00.07.10]</span></b> | 2024.10.10===
* <b>New</b>
** <b>Network</b>
*** Mobile: added ability to export modem debug and USSD responses to CSV file
*** Mobile: added "hologram" APN for "Hologram" operator
*** Mobile: added "wbdata" APN for "Granite" operator
*** Mobile: added "netw.vp" and "netw2.vp" APNs for "Networth" operator to APN database
*** NAT64: added "jool" package for NAT64 support
** <b>Services</b>
*** AWS IoT Core: added service
*** BACnet: added ability to configure several BIP interfaces, to set network numbers and preconfigure BDT entries for BBMD
*** Console: added service status information display
*** DLMS: added service status information display
*** DNP3 Client: added service status information display
*** DNP3 Outstation: added service status information display
*** Modbus Client: added service status information display
*** Modbus Server: added service status information display
*** Modbus TCP over Serial Gateway: added service status information display
*** MQTT Modbus Gateway: added service status information display
*** OPC UA Client: added service status information display
*** OPC UA Server: added variable "rut_wan_type" which shows if WAN is on a wired or a mobile network
*** OPC UA Server: added service status information display
*** RMS: added SOCKS5 proxy support
** <b>System</b>
*** Certificates: added SCEP certificate generation method
* <b>Improvements</b>
** <b>Network</b>
*** Curl: added unix socket support
*** Firewall: added most options to basic mode for all firewall pages
*** Firewall: added all firewall pages to basic mode
*** Interfaces: increased interface metric maximum value from 10000 to 4294967295
*** Mobile: added "flolive.net" APN for "Telecom Italia", "Telefonica O2" and "Telefonica Movistar" operators to APN database
*** Mobile: changed the default APN for IMS protocol from "VZWIMS" to "IMS" for "Verizon" operator
*** Mobile: fixed an issue where the ICCID was not returned correctly when the SIM card's ICCID ended with letters
*** Mobile: improved 5G NSA CA information display
*** Mobile: improved SIM and eSIM management via LPAC service
*** Multi WAN: added rules table to basic mode
*** Static Routes: added page to basic mode
*** VRRP: added page to basic mode
** <b>Services</b>
*** DLMS: added meter COSEM object scanning
*** DNP3 Client: made menu names more consistent
*** IPsec: improved 'Remote endpoint' validation to allow '%any', '%any4', '%any6' values and netmask
*** IPsec: added ability to use certificates from Certificate Manager
*** L2TPv3: added Tunnel ID and Session ID validation to avoid creating multiple tunnels with the same parameters
*** Modbus Client: updated Modbus Client menu position
*** Modbus Server: updated Modbus Server menu position
*** Python3: changed python3-light package libraries
*** SMS Utilities: added an option to enable or disable the return of status code message
*** Tailscale: improved status information by including health messages
*** Tinc: added options to set the tunnel's IP address
*** Tinc: added a port option to listen for incoming connections and the ability to specify a port for outgoing connections
*** Wireguard: added tunnel source mode selection
*** Python3: updated version to 3.11.7
*** Strongswan: updated version to 5.9.14
*** Tailscale: updated version to 1.70.0
** <b>System</b>
*** Access Control: refactored 'General', 'Security' and 'PAM' Web pages
*** Auto Reboot: added support for multiple hosts/URLs in Ping/Wget Reboot
*** Backup: encrypting backup does not require 7zip package anymore
*** Certificates: split "Let's Encrypt" certificates into multiple files
*** Troubleshoot: added dynamic routes debugging information
*** WebUI: added ability to open new page in new tab without entering user credentials
*** WebUI: improved SDK example application
*** Glib2: updated version to 2.80.5
*** Ncurses: updated version to 6.5
* <b>Fix</b>
** <b>Network</b>
*** Firewall: fixed automatic priority option change
*** Mobile: fixed hang up of QMI WDS service
*** Mobile: fixed QMI errors when multi APN is configured
*** Mobile: fixed typo in "m2m.airinternet.eu" APN for "Airinternet" operator in APN database
*** Network: fixed mobile Bridge/Passthrough mode not working after changing LAN interface settings
*** Network: fixed "LAN to WAN" and "WAN to LAN" button errors
** <b>Services</b>
*** BACnet: fixed communication issues between the ports
*** BACnet: added all available default baud rates
*** BGP: fixed AS field to allow duplicate values
*** BGP: fixed Access list filters not applying fully
*** DLMS: added all available default baud rates
*** DMVPN: fixed DMVPN GRE instance disappearing when creating new IPsec instance
*** DNP3 Client: removed unnecessary max length display for test response field
*** DNP3 Client: renamed TCP Station to TCP Client in the API documentation
*** DNP3 Client: added all available default baud rates
*** DNP3 Outstation: added all available default baud rates
*** GRE: fixed interface not showing up in OSPF and RIP selections if it is off
*** IPsec: fixed IP rule not appearing after network restart
*** IPsec: fixed duplicate port values in IPsec firewall rules
*** Ledman: fixed issue when power LED turns off when rebooting device
*** Modbus Client: added all available default baud rates
*** Modbus Client: added missing API docs for Modbus test request
*** Modbus Server: added all available default baud rates
*** Modbus Server: fixed firewall rule staying enabled when app is disabled
*** Modbus Server: fixed firewall rule creation
*** OpenVPN: fixed the configuration after disabling the use of external services
*** OpenVPN: fixed OpenVPN restarting when mobile interface comes up
*** SNMP: fixed Hotspot OIDs' hssID and hssUsername display
*** Tinc: fixed adding routes to remote subnets
*** Tinc: fixed configuration generation issues when creating multiple network and host instances
*** Tinc: fixed issues with route creation when using IPv6 addresses in tunnel configuration
*** Tinc: fixed validation for uploading key files
** <b>System</b>
*** Backup: fixed uploading backup with memory expansion enabled
*** CLI: fixed some private IPs being incorrectly determined as public
*** JSON-RPC: fixed login "Access Denied" error
*** USB: fixed device detection issue on some Windows systems
*** WebUI: added API required values validation when enabling BACnet, DLMS, DNP3, Modbus, MQTT, NTRIP services
*** WebUI: fixed 'Memory' status card progress bars visuals
*** WebUI: fixed search bar suggestions after removing packages
*** WebUI: fixed showing data in modals for users with only read permissions
*** WebUI: fixed custom SDK pages not loading correctly
* <b>CVE Patches</b>
** CVE-2021-3520
** CVE-2021-44540
** CVE-2021-44541
** CVE-2024-4032
** CVE-2024-6119
** CVE-2024-6232
** CVE-2024-6923
** CVE-2024-7264
----
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.9.4/TRB500/TRB500_R_00.07.09.4_WEBUI.bin TRB500_R_00.07.09.4]</span></b> | 2024.10.02===
* <b>Improvements</b>
** <b>Services</b>
*** NTP Client: changed default NTP servers
* <b>Fix</b>
** <b>Services</b>
*** NTP Client: fixed NTP server usage to work with next in line server if current server does not respond
----
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.9.3/TRB500/TRB500_R_00.07.09.3_WEBUI.bin TRB500_R_00.07.09.3]</span></b> | 2024.09.27===
* Firmware includes no changes for this device
----
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.9.2/TRB500/TRB500_R_00.07.09.2_WEBUI.bin TRB500_R_00.07.09.2]</span></b> | 2024.09.16===
* <b>Fix</b>
** <b>Network</b>
*** Network: fixed incorrect IP lease when using Bridge/Passthrough modes
----
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.9.1/TRB500/TRB500_R_00.07.09.1_WEBUI.bin TRB500_R_00.07.09.1]</span></b> | 2024.09.13===
* <b>Improvements</b>
** <b>Services</b>
*** Python3: updated version to 3.11.7
* <b>Fix</b>
** <b>Network</b>
*** Mobile: fixed eSIM profile config generation
----
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.9/TRB500/TRB500_R_00.07.09_WEBUI.bin TRB500_R_00.07.09]</span></b> | 2024.09.03===
* <b>New</b>
** <b>Network</b>
*** Devices: added VXLAN support
*** Firewall: added ability to configure NAT rule action
*** Firewall: added additional TTL target for firewall rules
*** Mobile: added "datamobile.ag" APN for "Datamobile.ag" operator to APN database
*** Mobile: added "m2m.ajrinternet.eu" APN for "Airinternet" operator to APN database
*** Mobile: added "wbdata" APN for "Webbing" operator to APN database
*** Mobile: added "inetd.vodafone.iot" APN for "Vodafone" operator to APN database
*** Mobile: added "asm" APN for "ASM" operator to APN database
*** Realtime Traffic: added historical traffic charts
** <b>Services</b>
*** Events Reporting: added new firmware version notification event
*** SNMP: added Multiwan data module
** <b>System</b>
*** WebUI: added notifications menu
* <b>Improvements</b>
** <b>Network</b>
*** Mobile: improved network bring up after operator scan
*** Mobile: updated bands selection to include band number and frequency
*** Mobile: improved SIM card notifications to get removed when SIM card state or active SIM changes
*** Mobile: improved modem update notifications to show modem name
*** Mobile: removed the USSD feature from the data-only modems
*** Ports Settings: added more PoE state symbols, colored disabled port differently and improved port status hint
*** Realtime Traffic: improved chart styles
** <b>Services</b>
*** Call Utilities: added check if the number is blocked before doing action
*** Data to Server: added warning messages about insecure certificates for http_certfile and mqtt_certfile options in API and WebUI
*** DLMS: added SHA256 authentication
*** DLMS: improved COSEM group enable validation
*** GRE: reduced GRE keepalive packet buffer size
*** IPsec: added support for route based tunnel
*** L2TP: added field for custom options
*** SMPP: added timeout option
*** Web Filter: added hostname count message after successful file upload
** <b>System</b>
*** Access Control: improved system user's access control rules logic
*** Access Control: added option to disable password auth for the root user
*** Administration: improved write/read access control options display to match meniu path style
*** Backup: improved backup page by splitting it into backup and reset settings page
*** Side Widget: added port status widget
*** Update Firmware: changed firmware update log to include firmware version
*** WebUI: updated firmware and backup verification pages design
*** WebUI: improved global alerts display
*** WebUI: added confirmation prompt for disabling service in side widget
* <b>Fix</b>
** <b>Network</b>
*** Devices: fixed configured VLAN 0 device cannot be selected in interface physical settings configuration
*** Mobile: fixed data limit widget to show used data for inactive interface
*** Mobile: fixed Bridge/Passthrough modes for routed networks
*** Mobile: fixed incorrect date values when setting SMS limit
*** Mobile: fixed SMS used data header counter
*** Mobile: fixed the issue where the PUK event was not displayed when the SIM PIN was blocked
*** Mobile: fixed uqmi start-network authentication issue
*** Mobile: fixed modem info not being filled on devices with more than one modem
*** Mobile: fixed mobile data limit to calculate correct used limits when using ipv4 and ipv6 simultaneously
*** Mobile: fixed USSD over IMS error handling
*** Mobile: fixed an issue where the interface could hang if the modem was busy
*** Network: fixed incorrect date values when setting data limit
** <b>Services</b>
*** Azure IoT Hub: fixed the Azure IoT Hub deprecated endpoint to create Data to Server sections
*** Azure IoT Hub: fixed the Azure IoT Hub deprecated endpoint so that it does not create sections in GET request
*** Azure IoT Hub: fixed the deletion of Data to Server sections when an Azure IoT Hub section is deleted through the deprecated endpoint
*** DLMS: fixed OBIS code validation
*** Input/Output: added I/O juggler reload when I/O pin direction is changed
*** OPC UA Client: fixed TCL file upload
*** OPC UA Server: fixed TCL file upload
*** OPC UA Server: fixed configuration migration
*** OpenVPN: fixed default firewall zone for tap interfaces
*** SNMP: fixed TELTONIKA-MIB wireless module crash
*** SNMP: fixed mobile network state display
*** SNMP: fixed default hssDwLimit, hssUpLimit, hssDwBandwidth and hssUpBandwidth values
** <b>System</b>
*** API Core: fixed file deletion
*** Package Restore: fixed automatic package re-installation after firmware upgrade
*** Troubleshoot: fixed troubleshoot not including all the log files when log to flash is enabled
*** USB: fixed RNDIS driver detection on Windows systems
*** User Settings: fixed page to show groups and users if the user has been granted access
*** WebUI: fixed overview page to display active wireless (WLAN) clients
* <b>CVE Patches</b>
** CVE-2021-32292
** CVE-2022-40617
** CVE-2023-49441
** CVE-2024-0397
** CVE-2024-3596
** CVE-2024-5535
** CVE-2024-8088
----
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.8.2/TRB500/TRB500_R_00.07.08.2_WEBUI.bin TRB500_R_00.07.08.2]</span></b> | 2024.08.12===
* <b>Fix</b>
** <b>System</b>
*** Update Firmware: fixed inconsistent firmware download from FOTA
----
===<b>TRB500_R_00.07.08.1</b> | 2024.08.06===
<b>Note:</b> This firmware version was removed due to an issue with FOTA firmware download.
* <b>Improvements</b>
** <b>Network</b>
*** Mobile: improved firmware downgrade validation for Quectel modules
** <b>Services</b>
*** Zerotier: updated version to 1.14.0
* <b>Fix</b>
** <b>Network</b>
*** Mobile: fixed wrong bandwidth parsing on 5G devices
*** Mobile: fixed an issue where in some cases mobile network interfaces would not be brought down properly
*** Mobile: fixed memory fault while allowlist and denied data roaming enabled
*** Network: fixed default route not being added for PPPoE connections
** <b>Services</b>
*** OPC UA Client: fixed connections not being closed after using testing functionality
** <b>System</b>
*** WebUI: fixed SDK WebUI package compilation
----
===<b>TRB500_R_00.07.08</b> | 2024.07.18===
<b>Note:</b> This firmware version was removed due to an issue with FOTA firmware download.
* <b>New</b>
** <b>Network</b>
*** DNS: added inherited server status to configuration page
*** HTTPS DNS Proxy: added new HTTPS DNS Proxy package to package manager
*** Mobile: added SIM card lock/unlock functionality in Mobile->Utilities page
*** Mobile: added SIM card PIN change functionality in Mobile->Utilities page
*** Mobile: added new Mobile->Limits page which shows information and allows to configure SMS limits
*** Mobile: added DFOTA support for RG520N modems
*** Mobile: added nr-arfcn display to mobile status page
*** Mobile: added dfota support for devices with RG520N-EB modem
** <b>Services</b>
*** Data to Server: added 'Lua script' data input
*** Input/Output: added ability to configure gpio debounce timer and changed default gpio debounce timer value from 200 ms to 10 ms
*** IPsec: added initial XFRM support
*** MQTT Modbus Gateway: added JSON message type format
*** OpenVPN: added DCO support
** <b>System</b>
*** API Core: added option to configure api session timeout
*** Certificates: added "Let's encrypt" certificate generation
*** PAM: added RADIUS external user support
*** UI Core: added data analytics support
*** Update Firmware: added warning message about device being temporarily unreachable on firmware update
* <b>Improvements</b>
** <b>Network</b>
*** DNS: separated field "DNS forwardings" into two: one for simple server forwarding other for domain-specific
*** DNS: moved "DNS Forwardings", "Listen interfaces", "Exclude interfaces", "Local service only", options to advanced tab
*** Firewall: improved protocol field in all firewall pages by making that "All" value would be mutually exclusive with any other value
*** Mobile: improved IMS context initialization
*** Mobile: updated SMS memory management for multipart SMS
*** Mobile: added error message when attempting to enable the SIM switch without any criteria set
*** Mobile: added informative message in SIM switch page when Data/SMS limit criteria are enabled but the limits themselves are not set up
*** Mobile: moved operator list allowlist/blocklist selection to Network selection page
*** Mobile: refactored Scanned operators modal, added repeat scan button
*** Mobile: added ability to view previously scanned operators in Network selection and Operator lists pages
*** Mobile: added ability to edit operator list name and initiate scans for operators in Operator lists page
*** Mobile: updated operator code field list to include APNs from the APN database in Operator lists page
*** Mobile: split Mobile->General page into three pages: General, Connection and Utilities pages
*** Mobile: added mobile interface with highest priority APN configuration in Mobile->General page
*** Mobile: added icons with hints which show SIM card, operator, data connection statuses in Mobile->General page
*** Mobile: moved Mobile data limit section to a tab in WAN page
*** Mobile: added informative message in WAN page to indicate whether the connection will be made using APN from APN database, empty or custom APN
*** Mobile: improved logging of ping error messages
*** Mobile: added 5G SA/NSA mode selection
*** Mobile: improved modem updater to stop ping reboot service while update is in progress
*** Mobile: improved the handling of denied messages upon SIM switch
*** Mobile: added notification when a multi-IMSI SIM card is using Auto APN
*** Mobile: added validation to not allow passthrough and bridge mode when one already exists
*** Mobile: improved safeguards for modem services startup
*** Mobile: improved modem update status display
*** Mobile: added corrupted mobile statistics database restoration functionallity
*** Mobile: improved setting of IPv4 and IPv6 types inside the modules
*** Mobile: improved provider name parsing for SLM750 modem
*** Multi WAN: improved interface status representation when using load balancing
*** Network: added more options for "IPv6 assignment length" field
** <b>Services</b>
*** Azure IoT Hub: added DPS symmetric key attestation support
*** Azure IoT Hub: added Direct Method support
*** Azure IoT Hub: added Plug and Play integration
*** Azure IoT Hub: added link to "Data to Server" page
*** Data to Server: added support for multiple filters
*** Data to Server: improved HTTP output hostname definition with automatic protocol specification in URL
*** Data to Server: improved MQTT input connection handling
*** DNP3 Client: added option to enable/disable service
*** GRE: increased Inbound and Outbound key limit to 4294967295
*** Input/Output: added custom name support in I/O status page
*** IPsec: added certificate warning message
*** Mobile Utilities: added interface option to sms_utils cellular command
*** Mobile Utilities: improved error log message
*** Mobile Utilities: improved naming of I/O pins in initial I/O status rule
*** Mobile Utilities: sms utilities authentication brute force prevention
*** Modbus Server: added mobile last month and last week usage registers
*** Mosquitto: added large package size check for MQTT clients
*** MQTT Modbus Gateway: improved mosquitto reconnect time and service will try to recover few times before exiting
*** MQTT Publisher: improved MQTT connection handling
*** OPC UA Client: added security modes
*** OPC UA Server: added security modes
*** OPC UA Server: added service status display
*** OpenVPN: added support for decrypting private key when uploading a configuration file
*** OpenVPN: improved instance status state
*** OpenVPN: added options to specify an IP address pool for dynamic assignment to clients
*** SMPP: added brute-force prevention
*** SMPP: added TLS/SSL support
*** SMS Utilities: added security warning in "Authorization method" configuration
*** SNMP: changed interface module OID structure
*** SNMP: improved User-based Security Model (USM) brute force attack prevention measures
*** Stunnel: improved global instance settings dependencies
*** emailrelay: updated version to 2.4.1
*** OpenVPN: updated version to 2.6.9
*** stunnel: updated version to 5.72
*** Tailscale: updated version to 1.68.1
** <b>System</b>
*** Access Control: added certificate key length warnings
*** Access Control: adjusted access control when all pages are blocked
*** Access Control: added certificate file download for CLI to work on all browsers
*** API Core: implemented functionality to include warning messages for vulnerable certificates
*** Boot: improved modem startup reliability
*** Package Manager: added multi package actions
*** Package Manager: added status filter
*** Package Manager: moved package upload action to main page
*** Package Manager: added links to installed packages pages
*** Package Manager: refactored "Packages" page
*** Package Manager: updated opkg repository link to use https
*** RutOS: improved GPL example page to align with new software architecture
*** Troubleshoot: refactored Modem debug section to display responses in single field, added clear button to remove received responses
*** Troubleshoot: added support for multiple syslog servers
*** UI Core: added additional message with IP address to loading screen for scenarios when redirect to different IP address happens
*** UI Core: added toast message hiding when text is too long
*** Update Firmware: added 'Firmware version' data in screen after firmware upload
*** WebUI: added functionality to cancel loading screen if it takes 30 or more seconds
*** WebUI: removed all ubus method calls from webui
*** WebUI: improved language caching
*** WebUI: added password generator for first login modal
*** WebUI: added sticky position to side menu
*** WebUI: added default password hint to login error message
*** WebUI: added warning messages for low-security certificates
*** libexpat: updated version to 2.6.2
*** SSL/TLS: updated version to 3.0.14
*** vue: updated version to 3.4
* <b>Fix</b>
** <b>Network</b>
*** Devices: fixed missing API devices status endpoint permission
*** DHCP: fixed "DHCP option" allow empty input value
*** DHCP: fixed IPv4 leases being not correctly shown when NTP synchronizes time
*** DHCP: fixed DHCP error that occurred after changing the subnet of the LAN IP address in the setup wizard
*** Dynamic routes: fixed duplicated external routes cards
*** Firewall: fixed firewall zone validation when adding interfaces
*** Mobile: fixed low signal reconnect being available on modems where it is not supported
*** Mobile: fixed gsmctl -E output to return only json values
*** Mobile: fixed Carrier Aggregation signal strength info
*** Mobile: fixed wrong mobile data limit used data format for sms messages
*** Mobile: fixed duplicate data connection event reporting
*** Mobile: fixed an issue where low signal notifications were displayed without a SIM card
*** Mobile: fixed modem serial number acquisition after modem reboot
*** Mobile: fixed an issue when 4G-only network type selection may have resulted in a slower connection to the operator
*** Mobile: fixed issue where USSD responses were returned in HEX format instead of text format for EC200A module
*** Mobile: fixed issue where DHCP filter was not set correctly for RG501Q
*** Mobile: fixed modem restart using gsmctl
*** Mobile: fixed an issue where the wrong IP address was used after a DFOTA upgrade
*** Network: fixed overriding MAC address for interfaces that are bridged
*** Network: fixed not getting IP address when switching LAN to WAN
*** Network: fixed mobile data counters
*** Realtime Traffic: fixed mobile usage by week day translation by device language
*** SQM: fixed missing PPP mobile device selection in SQM configuration
** <b>Services</b>
*** BACnet: fixed incorrect BACnet IP port used for sending responses
*** BGP: fixed route map sequence going out of range
*** BGP: fixed listen range field allowing multiple entries
*** Call Utilities: fixed table header switch to be disabled if no rules were created
*** DLMS: fixed DLMS test response format
*** DLMS: fixed COSEM group validation
*** DLMS: fixed API POST error for /dlms/devices/config endpoint
*** DLMS: fixed serial connection not working after reboot
*** DNP3 Client: fixed to allow reading objects past 255 index
*** DNP3 Client: fixed incorrect hints
*** DNP3 Outstation: fixed serial outstation starting issues
*** I/O Juggler: fixed improper dout action config handling
*** I/O Juggler: updated profile change action
*** Input/Output: allow unselecting all Post/Get access methods
*** IPsec: fixed connectivity issues when using WAN failover
*** IPsec: fixed the instance status when the local firewall option is disabled
*** Ledman: fixed issue when after some time network type LED starts blinking
*** Modbus Client: fixed test request option validation
*** Modbus Client: fixed alarm output action display values
*** Modbus Client: fixed incorrect period hint
*** Modbus Server: fixed APN register not clearing APN
*** Modbus Server: fixed 148 and 164 modbus registers
*** Modbus Server: fixed incorrect hints
*** OPC UA Server: fixed not starting while modem is down
*** OpenVPN: fixed displaying imported files from device
*** OpenVPN: fixed the private key decryption for cases when a password is used
*** OpenVPN: fixed data cipher migration
*** Overview: fixed issue when devices without WiFi send additional request without data
*** SMPP: fixed username bypass problem
*** SMPP: fixed password validation
*** SMS Gateway: fixed SMS to Email recipient formatting according to RFC5322
*** SNMP: fixed GSM mSignal OID value type
*** SNMP: fixed GSM module memory leaks
*** SSTP: fixed functionality when the default route option is not enabled
*** Web Filter: fixed whitelist not working for some hosts when using IPv6
** <b>System</b>
*** Administration: fixed repeated validation on cleared inputs and added validation when new password matches the old one
*** API Core: fixed API method validation during upload action
*** API Core: fixed error messages for POST method
*** API Core: fixed option list validation
*** Boot: fixed factory settings restore (firstboot) not deleting hidden files
*** Events Log: fixed refresh button in event log table
*** IP Block: fixed adding MAC addresses back to whitelist when unblocking all of them
*** Kernel: fixed stability issues when using mobile connection
*** Recipients: made phone number field required
*** Setup Wizard: fixed lan ip step not changing ip address
*** Troubleshoot: fixed system log and kernel log buttons to be enabled with read only rights
*** Update Firmware: fixed misleading "Firmware version" status of "N/A" to "FOTA service is disabled" when FOTA is disabled
*** Update Firmware: fixed issue when infinite spinner appears after updating device firmware from server without having internet connection
*** USB: fixed USB ethernet VID PID declaration
* <b>CVE Patches</b>
** Patched CVE-2023-52425
** Patched CVE-2023-52530
** Patched CVE-2024-25629
** Patched CVE-2024-28757
----
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.7.3/TRB500/TRB500_R_00.07.07.3_WEBUI.bin TRB500_R_00.07.07.3]</span></b> | 2024.06.25===
* <b>Fix</b>
** <b>Network</b>
*** WebUI: fixed port advertisement change
** <b>System</b>
*** FOTA: fixed config when upgrading from older firmware with keep settings
* <b>CVE Patches</b>
** CVE-2024-31950 
** CVE-2024-31951
----
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.7.2/TRB500/TRB500_R_00.07.07.2_WEBUI.bin TRB500_R_00.07.07.2]</span></b> | 2024.06.12===
* <b>Improvements</b>
** <b>Network</b>
*** Zerotier: added backup WAN interface blacklisting if WAN failover is enabled
*** Mobile: improved communication stability with eSIM
** <b>Services</b>
*** SNMP: added bruteforce attack prevention when using SNMP v3 user
*** L2TP: improved reconnect attempt logic
** <b>System</b>
*** SSH: removed weak SSH algorithms
*** Telnet: moved to Package Manager
* <b>Fix</b>
** <b>Network</b>
*** BGP: fixed instance migration issues
*** ETH driver: fixed connection loss after changing of IP address
*** Mobile: fixed forced APN configuration
** <b>Services</b>
*** DMVPN: fixed duplicate NHRP map entries creation
*** OpenVPN: added fixes for the insecure tls-cert-profile option usage
** <b>System</b>
*** IP Block: fixed blocking of UDP traffic
* <b>CVE Patches</b>
** CVE-2024-31948
----
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.7.1/TRB500/TRB500_R_00.07.07.1_WEBUI.bin TRB500_R_00.07.07.1]</span></b> | 2024.05.03===
* <b>Improvements</b>
** <b>Network</b>
*** Mobile: improved connection establish time for uqmi protocol
** <b>System</b>
*** WebUI: improved first login password change logic
*** Certificates: updated Root CA certificates
* <b>Fix</b>
** <b>Network</b>
*** Mobile: fixed denied roaming flag set
* <b>CVE Patches</b>
** CVE-2024-2397
----
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.7/TRB500/TRB500_R_00.07.07_WEBUI.bin TRB500_R_00.07.07]</span></b> | 2024.04.16===
* <b>New</b>
** <b>Network</b>
*** WebUI: added ESM/EMM message notifications
*** WebUI: added internet status tracking configuration and overview widget
*** LAN: added a new IPv6 LAN status page
*** Static Leases: added a new IPv6 Static Leases page
*** WebUI: added custom domain name resolve option in “DNS” configuration page
*** Auto APN: added “uno.au-net.ne.jp” APN for “KDDI” operator
*** Auto APN: added 'eprivate010.tisparkle.com' APN for “Sparkle” operator
*** Mobile: added framed routing support
*** VRF: added initial Virtual Routing and Forwarding support
** <b>Services</b>
*** Post/Get: added I/O invert support
*** DLMS Client: added persistent TCP connections
*** Events Reporting: added unexpected shutdown event
*** Modbus Client: added 64bit data types
*** IPerf3: added iPerf3 to Package Manager
*** DNP3 Outstation: added I/O objects
*** TR-069: added PCI, LAC, TAC, EARFCN and Neighbour cells data to Device.MobileInfo node
*** Hotspot: added domain and subdomain options for external landing page
** <b>System</b>
*** WebUI: added the ability to generate random passwords for password input fields
*** WebUI: added reset to “Factory defaults” option
*** System: changed firmware certificate verification tool
*** IP Block: added time-based login attempt blocking
*** WebUI: added firmware update notification support
*** PAM: added the ability to set port for TACACS+
*** Logging: added multiple remote syslog servers support
* <b>Improvements</b>
** <b>Network</b>
*** Static Leases: added possibility to use MAC with wildcard
*** WebUI: added ability to disable modem update notifications
*** Topology: changed network devices scanning application
*** WebUI: improved design of Status - LAN page
*** DHCP: simplified DHCP configurations in other pages and moved full DHCP configuration to a separate page
*** WebUI: simplified data entry of DNS forwardings by separating hostname and IP address fields
*** BGP: added Virtual Routing and Forwarding (VRF) support
*** BGP: added multiple BGP instance support
*** WebUI: adjusted responsive design breakpoints
*** HNAT: improved WAN->LAN packet offloading
*** Mobile: improved mobile services stability when SIM card is lost during SMS sending
*** Mobile: updated bridge/passthrough mode logic to flush ARP and add static ARP entry if MAC is specified
*** WebUI: added partial data loading to APN database page
*** Mobile: improved SMS sending timeouts during network issues
*** Mobile: added metric to default gateway when using passthrough mode
*** WebUI: added validation for 2 same APNs
*** WebUI: updated Band selection field to show duplex modes in Mobile General page
*** Dnsmasq: updated dnsmasq to version 2.89
** <b>Services</b>
*** Wireguard: added option to bind tunnel to a specific interface
*** OPC UA Client: added limits (10 servers, 20 groups, 50 nodes per server, 50 values per group)
*** DLMS Client: increased maximum count of connection sections to 30
*** DLMS Client: added short name referencing
*** SNMP: set strict default community access when IPv6 address is used
*** SNMP: improved sysName OID to set device's hostname
*** OpenVPN: added the bridge option for selecting the network device to be bridged with
*** OpenVPN: added possibility to create more than one TAP client
*** Auto Reply: added available SMS message parameters to "Message text" input
*** Modbus Client: allow using diacritics in SMS alarms
*** Hotspot: moved MAC blocking option from Access Control to Hotspot page
*** WebUI: added MAC authentication support when using RADIUS authentication mode
*** WebUI: moved licenses to footer
*** SSTP: updated package version to 1.0.19
*** Mosquitto: updated package version to 2.0.17
*** Tailscale: updated package version to 1.62.1
** <b>System</b>
*** WebUI: added more strict password requirements for restoring backup
*** SMTP: added option to either not verify SMTP server or upload SMTP server's CA file to verify authenticity
*** WebUI: Added the ability to choose the ROOT CA when using certificates from the device
*** WebUI: unified time format to ISO8601 across the entire WebUI
*** WebUI: added ability to choose imported certificate and key as 'Server certificate' and 'Server key' in 'Access Control'
*** WebUI: added 'Hosts' and 'IP Addresses' options for 'Simple' certificate generation and certificate signing
*** WebUI: changed firmware update option to server as a default option
*** GPL: added offline package preparation command for GPL builds
*** Speedtest: added multiple connections support to improve accuracy
*** LED: added power LED control
*** Kernel: updated version to 4.14.336
*** Libcap: updated package version to 2.69
* <b>Fix</b>
** <b>Network</b>
*** WebUI: fixed static routing creation for GRE instance
*** Network: fixed DHCPv4 relay mode enabling
*** Mobile: fixed PIN code set after modem restart
*** Mobile: fixed cases where 5G NSA network type was shown incorrectly
*** Mobile: fixed an issue where using SIM change command on one SIM slot modems would reset connection
*** Mobile: fixed an issue where message storage would not be checked correctly
*** Mobile: fixed temperature value sometimes returning 0
*** Mobile: fixed deny data roaming being ignored in some cases when switching networks
** <b>Services</b>
*** Modbus Client: allow using negative floating point values in requests
*** Azure IoT Hub: fixed Data to Server minor WebUI dependency bugs
*** Data to Server: fixed DLMS data formating
*** Data to Server: fixed Network link state data display
*** DLMS Client: fixed segfault while reading profile generic COSEM object
*** DLMS Client: fixed profile generic entries reading
*** DLMS Client: fixed application memory allocation issues
*** SSTP: fixed route adding when default route is enabled
*** SNMP: fixed VLAN OID naming
*** OpenVPN: added fixes for instance status tracking functionality
*** OpenVPN: resolved uptime counting issues
*** PPTP: fixed PPTP instance deletion problem
*** Hotspot: fixed password validation for locally created users and signed-up users
*** Hotspot: fixed session invalidation after deleting registered user
*** Hotspot: fixed SMS OTP password reuse
*** Hotspot: fixed firewall rule creation
*** Modbus Client: fixed issue where service freezes when SMS alarm is sent
*** WebUI: fixed data loading error in Input/Output > Post/Get page
*** MQTT Publisher: fixed device/router topic naming bug
*** Azure IoT Hub: fixed 'contentType' telemetry message parameter
*** UPnP: updated package version to 2.3.4
** <b>System</b>
*** NTP Client: fixed ‘Count of time synchronizations’ execution when synchronization to mobile operator is chosen
*** Package Manager: fixed spinner message when restarting network after package upload or download
*** Package Manager: fixed supported devices check when installing a package from server
*** WebUI: fixed language install from uploaded package after upgrade with keep settings
*** WebUI: fixed an issue when a user was not logged out after changing profiles
*** Telnet: fixed segmentation fault during concurrent connections
*** CLI: fixed enter key issue on mobile chromium based browsers
*** System Users: fixed SSH session close after deleting user or disabling SSH access
*** Profiles: fixed profile migration with installed packages
*** WebUI: fixed Hotspot log page table search functionality
*** Speedtest: fix missing download speed on some servers
*** PAM: updated libpam to version 1.6.0
* <b>CVE Patches</b>
*** CVE-2022-4269
*** CVE-2022-4603
*** CVE-2022-23308
*** CVE 2022-45061
*** CVE-2023-0466
*** CVE-2023-6129
*** CVE-2023-6915
*** CVE-2023-7042
*** CVE 2023-24329
*** CVE 2023-27043
*** CVE-2023-42366
*** CVE-2023-46218
*** CVE-2023-46219
*** CVE-2023-46752
*** CVE-2023-46753
*** CVE-2023-48795
*** CVE-2023-52435
*** CVE-2024-25062
*** CVE-2024-27913
*** CVE-2024-22365 
----
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.6.10/TRB500/TRB500_R_00.07.06.10_WEBUI.bin TRB500_R_00.07.06.10]</span></b> | 2024.04.04===
* <b>Fix</b>
** <b>System</b>
*** Ledman: fixed memory leak
----
===<b>TRB500_R_00.07.06.8</b> | 2024.03.25===
Firmware <b>R_00.07.06.8</b> was removed due to an issue with inefficient memory allocation for LED control.
* <b>New</b>
** <b>WebUI</b>
*** Added eSIM support
* <b>Improvements</b>
** <b>Services</b>
*** IPSec: disabled libgmp in favor of openssl
*** IPSec: updated Strongswan to 5.9.6
* <b>Fix</b>
** <b>Services</b>
*** IPSec: increased charon load timeout
*** IPSec: fixed loading of large private keys
----
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.6.6/TRB500/TRB500_R_00.07.06.6_WEBUI.bin TRB500_R_00.07.06.6]</span></b> | 2024.03.04===
* <b>New</b>
** <b>Services</b>
*** Added domain and subdomain options for external landing page in Hotspot
* <b>Improvements</b>
** <b>System</b>
*** Minified *.svg WebUI files to save space on the device
*** Removed unused easy-rsa package to increase free space
----
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.6.5/TRB500/TRB500_R_00.07.06.5_WEBUI.bin TRB500_R_00.07.06.5]</span></b> | 2024.02.21===
* <b>New</b>
** <b>Network</b>
*** Added support for multi line USSD
* <b>Improvements</b>
** <b>Network</b>
*** Improved DMZ to use its source zone on port forwards creation
** <b>System</b>
*** Updated netifd version to 2024-01-04
*** Updated PPP package version to 2.4.9
*** Updated E2fsprogs package version to 1.47.0 
*** Updated Musl package version to 1.2.4
* <b>Fix</b>
** <b>WebUI</b>
*** Fixed action descriptions in the traffic rules table
*** fixed BACnet allow remote access functionality
----
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.6.3/TRB500/TRB500_R_00.07.06.3_WEBUI.bin TRB500_R_00.07.06.3]</span></b> | 2024.01.17===
* <b>Improvements</b>
** <b>Services</b>
*** Increased DLMS Client connection timeout for TCP sockets
* <b>Fix</b>
** <b>Services</b>
*** Fixed DLMS Client memory leak with profile generic COSEM class
** <b>WebUI</b>
*** Fixed Events Log sorting and search features
** <b>System</b>
*** Patched CVE-2024-0193 vulnerability
*** Patched CVE-2023-51779 vulnerability
*** Updated OpenSSH to 9.6p1 version, fixed CVE-2023-51385 and CVE-2023-51384
*** Fixed profile migrations, added error handling when trying to change profile while it is still applying
----
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.6.1/TRB500/TRB500_R_00.07.06.1_WEBUI.bin TRB500_R_00.07.06.1]</span></b> | 2024.01.04===
* <b>Fix</b>
** <b>Services</b>
*** Fixed issue with NTPclient zombie processes
** <b>WebUI</b>
*** Fixed issues with VoLTE status and 5G network type display
----
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.6/TRB500/TRB500_R_00.07.06_WEBUI.bin TRB500_R_00.07.06]</span></b> | 2023.12.20===
* <b>New</b>
** <b>Network</b>
*** Enabled IPv6 by default for mobile interfaces
*** Added operator blacklisting and whitelisting based on mobile country code
*** Added SIM card not inserted event in Events Log
** <b>Services</b>
*** Added OPC UA Server
*** Added the ability to set port for TACACS+ in PAM service
*** Added switch to enable using root certificate authority for MQTT alarms in Modbus Client services
*** Added new alarm action "Ubus event" in Modbus Client services 
*** Added new input "Modbus alarms" in Data to Server service
*** Added wget ping subtype support in Events Reporting service
*** Added new I/O SNMP OID that returns numeric I/O state
*** Added new Post/Get service action "mobile_sim_pin" for changing used SIM PIN code on the device
** <b>WebUI</b>
*** Added Tailscale VPN support
*** Renewed user interface design
*** Added network interface name change functionality
*** Added indication when new modem firmware is available
*** Added mobile connection establishment display in mobile status page
*** Added default value for "Reset threshold" field in Low Signal Reconnect feature
** <b>System</b>
*** Added ability to enable/disable SSH access for specific users in System Users
*** API support

* <b>Improvements</b>
** <b>Network</b>
*** Disabled operator scan when SIM card is not inserted
** <b>Services</b>
*** Expanded GRE VPN keep alive functionality to disable routes from unreachable tunnel
*** Added PKCS#12 certificate container authentication method in IPsec VPN
*** Added TLV message_payload support for SNMP service
*** Added Purple.ai configuration profile
*** Added additional anonymous phone number validation in Mobile Utilities service
*** Added "N/A" signal strength response in DNP3 service if SIM card is not inserted 
** <b>WebUI</b>
*** Improved Events Log page loading by adding asynchronous pagination
*** Removed requirement for Diffie-Hellman parameters in OpenVPN service
*** Added improvements for creating OpenVPN IPv6 configurations
*** Added auto redirect after changing router's IP address or port 
*** Added "Interface" dropdown for interfaces selection in Wake on LAN service
*** Increased Data to Server service MQTT topic length limit to 65535 characters
*** Added OSPF external routes section to Status page
*** Moved device menu entry “Reboot” to header menu
*** Updated Operator state field to show if modem is in limited service
*** Added message when SIM card requires PIN/PUK code in Status -> Mobile page
** <b>System</b>
*** Added Mosquitto CVE patch 2023-28366
*** Added Mosquitto CVE patch 2023-3592
*** Updated cURL version to 8.4.0
*** Updated kernel version to 4.14.328
*** Added RMS data display to generated troubleshoot 
*** Added downloaded Package Manager packages list to generated troubleshoot 
*** Added process activity load list to generated troubleshoot
*** Changed default OPKG feed to use Teltonika's URL 

* <b>Fix</b>
** <b>Network</b>
*** Fixed DMVPN firewall rule creation issues
*** Fixed mobile service crash due to buffer overflow while reading partially overwritten SMS
*** Fixed an issue with Manual APN connection making attempts too rapidly 
*** Fixed deny data roaming functionality when transitioning between roaming and home operator network
*** Fixed network disconnection on mobile network detach and DHCP lease loss situations 
*** Fixed VoLTE configuration after modem reboot
*** Fixed Mobile interface bridge and passthrough mode connectivity loss
*** Fixed an issue where rarely PIN code would get removed after SIM switch
*** Fixed mobile operator list being not updated after changes in WebUI
** <b>Services</b>
*** Fixed SSH module enable in PAM service
*** Added minimum free space check when saving logs to flash in Logging service
*** Fixed "Set multiple coils" function sending too many bytes in Modbus Client services
*** Fixed multiple Events Reporting messages being sent when Firewall configuration is changed
*** Fixed VRRP instances advertising wrong virtual IPs
*** Added Hotspot information in SNMP MIB file
*** Fixed registered Hotspot Local Users showing random username
*** Fixed selection of MAC Auth for LAN interfaces in Hotspot service
*** Fixed inconsistent Hotspot login behaviour when using MAC Auth with Password
*** fixed instance shutdown after last local user deletion
*** Fixed RMS Hotspot data display for devices without WiFi support
*** Fixed Cumulocity app not sending any telemetry data
*** Fixed Call Utilities failure when caller id is hidden during a call 
*** Fixed default profile SMS Utilities I/O status rule configuration in Profiles functionality
*** Fixed mobile cell ID retrieval in TR-069 service
** <b>WebUI</b>
*** Fixed side menu style issues when Japanese language is used
*** Fixed displaying of vendor names in Topology page
*** Fixed language packs being selectable when still in Package Manager queue
*** Added ability to configure IPv6 BGP peer
*** Fixed realtime graphs responsive design issues
*** Fixed not all LAN interfaces shown in dropdown in Hotspot service page
*** Fixed modem updater legacy firmware flashing
** <b>System</b>
*** Patched FRR CVE-2023-38406
*** Patched FRR CVE-2023-38407
*** Patched FRR CVE-2023-41358
*** Patched FRR CVE-2023-41360
*** Patched FRR CVE-2023-41909
*** Patched FRR CVE-2023-47234
*** Patched FRR CVE-2023-47235
*** Patched OpenSSL CVE-2023-3446
*** Patched OpenSSL CVE-2023-3817
*** Patched LibXML2 CVE-2023-39615
*** Patched LibXML2 CVE-2023-45322
*** Patched FFMPEG CVE-2021-28429
*** Patched FFMPEG CVE-2022-48434
*** Patched dnsmasq CVE-2023-28450
*** Fixed running out of space when SSHFS is mounted in /tmp while generating troubleshoot

===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.5.4/TRB5/TRB5_R_00.07.05.4_WEBUI.bin TRB5_R_00.07.05.4]</span></b> | 2023.11.09===
 
* <b>Improvements</b>
** <b>WebUI</b>
*** Improved asynchronous pagination in events log pages
*** Optimized Overview page load
*** Added resource loading cancellation after switching to different page

===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.5/TRB5/TRB5_R_00.07.05_WEBUI.bin TRB5_R_00.07.05]</span></b> | 2023.10.09===
 
* <b>New</b>
** <b>Network</b>
*** Added "shared.m2m.ch" APN for Swisscom IoT operator to APN database
*** Added "gamma" APN to auto-APN database
*** Added "soracom.io" APN for Soracom operator to APN database
*** Added "simbase" APN to auto-APN database
*** Added "pnd" APN for Pond IoT to auto-APN database
*** Added "spitfire1" APN for Spitfire operator to APN database
*** New argument in "gsmctl" CLI command for Carrier aggregation
*** Numeric mode support for modem AT commands
*** Enabled dynamic MTU configuration on mobile interfaces by default
** <b>Services</b>
*** DLMS Client package
*** 7zip package
*** TincVPN package
*** Added router uptime and mobile connection uptime data parameters to SNMP
*** Custom MQTT publisher/subscriber topics definition support 
*** Alternative configuration file upload support for MQTT Broker service
*** Device Provisioning Service support for Azure IoT Hub service
** <b>WebUI</b>
*** Firewall status page
*** Page search feature
*** Network Topology page
*** "Allow insecure connection" option for MQTT TLS protocol in Data to Server service
*** Package Restore feature Enable/Disable option
*** Hotspot client connection/disconnection trap option for SNMP service
*** Added Events log trap option for SNMP service
*** Confirm dialog when cancelling a verified package in Package Manager
*** "Bridge ALPN" option for Bridge configuration in MQTT Broker service
*** New subtypes of events that specify a specific port on "Events Reporting" and "SNMP Trap rules" pages
*** Specific firmware packages repository link in Package Manager page 
*** Ability to enter decryption passphrase for encrypted private keys 
*** "Reconnect" button in RMS page
*** New event "Device startup completed" in Events Reporting service
*** Modem Debug page
*** APN database management page added to package manager
*** Added "Message forwarding" option in SMS Rules page when rule type is "Execute custom script" 
*** Ability to unblock SIM card and insert SIM PIN in Overview page
*** New SMS rules "Reset mobile connection" and "Reload config"
*** "SMS limit clear due" display in Overview page
*** Added modem temperature to System -> Status page
** <b>System</b>
*** Mechanism to rebrand WebUI using GPL
*** Possiblity to create web applications with closed-source GPL
 
* <b>Improvements</b>
** <b>Network</b>
*** Moved FRR VTYSH package to package manager
*** Made newly created Firewall Traffic, NAT rules and Port Forwards disabled by default
*** Improved Interfaces to enable IPv6 DHCP server when mobile v6 or v4v6 PDP type is set
*** Improved auto APN selection
*** SMS sending event is now logged into events log
*** Improved roaming control
*** Removed unused APN usernames and passwords from auto-APN database
*** Added connection to the operator when no mobile interfaces are active
*** Improved VoLTE management functions
*** Improved cases where Low Signal Reconnect sometimes executed prematurely
*** Improved wrong SIM PIN remove logic
** <b>Services</b>
*** New reworked Data to Server
*** UPNP moved to package manager
*** Added IPv6 support for Modbus TCP Server/Client services
*** Refactored Azure IoT Hub service
*** Improved resiliency to timeouts in Modbus Client service
*** Added PDU data type to Modbus read requests
*** Added new formatters for MQTT alarms in Modbus Client service
*** Added main section to make test functions independent in Modbus Client service
*** Improved WAN IP register reading time in Modbus service
*** Sped up default profile and profile template generation for Profiles functionality
*** Optimized profile change time for Profiles functionality
*** Added IPv6 support for Stunnel VPN
*** Added MAC blocking for client connections after set amount of failed login attempts in Hotspot service
*** Improved TCPdump by allowing to capture packets from any interface
*** Added OSPF support for DMVPN
*** Updated Hotspot password hashing to sha512
*** Added Hotspot service support 
*** A single SMS message with multiple PDUs is sent instead of multiple SMS messages in Email to SMS service
*** Allowed connection to SMPP server using IPv6 address
*** Extended IP unblock action functionality in SMS Utilities
*** Increased allowed Email to SMS service message size to 61440 bytes
*** Added I/O pin name to trap notification message
** <b>WebUI</b>
*** Reorganized menu
*** Updated header design
*** Split Interfaces configuration in Advanced mode into two pages: WAN and LAN, identically as in Basic WebUI mode
*** Moved Interfaces IPv6 configuration into seperate tab
*** Added client/server status information in OpenVPN instance overview page
*** Added more IPv6 information to interface status in Interfaces page
*** Removed "Custom delegated IPv6-prefix" field from DHCPv6 configuration in Interfaces page
*** Disabled DHCPv6 interface editing while in basic mode
*** Refactored custom DHCP options into seperate modal
*** Added automatic start and end IP allocation for DHCP server configuration in Interfaces
*** Added client/server status information in L2TP VPN page
*** Added "MTU" field to L2TP client configuration page
*** Added CHAP, PAP and MSCHAP-v2 authentication fields to L2TP instance configuration 
*** Added more detailed IPsec VPN status information
*** Encryption AES-256-CBC added as default in OpenVPN
*** Added "Authentication algorithm" support to OpenVPN configuration with static key mode
*** Added GRE (DMVPN) VPN tunnel source support to any instead of specific interface 
*** Improved Hotspot landing page theme package removal
*** Added upload and download theme functionality to Hotspot Landing page
*** Improved ZeroTier VPN bridge configuration
*** Added ability to adjust order of rules in Firewall page
*** Added IPv6 RAW table to be displayed in Status -> Firewall
*** Improved file upload component's visual appearance
*** Change "Allow anonymous" option default value to 0 in MQTT Broker
*** Added option to specify "Client ID" in MQTT Publisher
*** Added functionality to select specific interface in Web Filter service
*** Allowed to select  FTP server subfolder in Traffic Logging service
*** Renamed various service master/slave naming convention in config files, package names and webUI to client/server
*** Added "Create static" button in Status -> Network -> LAN which bind DHCP lease for device
*** Updated Status -> Network -> Mobile page layout
*** Added bandwidth, provider in Status -> Network -> Mobile page
*** Added colors for signal strength values in Status -> Network -> Mobile page
*** Added frequency, pcid, mcc, mnc and LAC values in Status->Network->Mobile page
*** Refactored network type selection in Network -> Mobile -> General page
*** Serving cell information is not returned anymore when SIM card is not inserted
*** Changed default "Check interval" option value in Network -> Mobile -> SIM Switch page
*** Added button in a Scanned operators table which allows to add an operator to the operator list
*** Added search bar in Mobile Utilities -> SMS Utilities page
*** Added SMS sent and limit count to Network -> Mobile -> General page
*** Updated Mobile Signal graphs to show EC/IO and RSCP values when network type is 3G
*** Updated Mobile Signal graphs to show RSRP, RSRQ and SINR values when network type is 5G
** <b>System</b>
*** Updated kernel version to 4.14.319
*** Updated UCI version to 2021-10-22
*** Updated SSHFS version to 3.7.1
*** Updated FRR suite to 8.4.2
*** Updated cURL version to 8.2.0
*** Updated TCPdump version to 4.99.4
*** Updated C-ares version to 1.19.1
*** Updated iproute2 version to 5.19.0
*** Updated libubox package version to 2021-08-19
*** Added CVE patch CVE-2023-2650
*** Added additional firmware information in CLI prompt banner
*** Connection mode LED now blinks on data transfer
*** Changed "routername" to "devicename" in system config file
*** Made all clients get disconnected out once dropbear service is disabled
*** Improved firmware downgrade restrictions for certain regions
*** Device name is now displayed in browser tab when in WebUI login page
*** Added NF conntrack information in generated troubleshoot archive

* <b>Fix</b>
** <b>Network</b>
*** Fixed UDP Broadcast Relay service crashing on start without physical network device
*** Fixed SMS limit period migration
*** Fixed SMS limit size breaking various functionality
*** Fixed custom IPv6 DNS option not overriding default DNS from operator
*** Fixed an issue with blacklist and whitelist connection 
*** Fixed multipart SMS handling
*** Fixed wrong SIM state display when SIM is fully blocked
*** Fixed incorrect virginmobile APN MNC
*** Fixed mobile operator scanning fault when no mobile interfaces are active
*** Fixed mobile interfaces generating multiple events on mobile connection
*** Fixed device selecting 4G/5G service mode when 3G and manual operator configured
*** Fixed PDU SMS parsing when operator provides user data header in single part SMS
*** Fixed modem temperature retrieval
** <b>Services</b>
*** Fixed reconnecting to inactive connections for Modbus Server service 
*** Fixed Modbus Client response after reboot write request
*** Fixed Modbus Server to show error when trying to get operator name without SIM
*** Updated Modbus Client to handle large numbers of schedule rules, when frequency is set to schedule (Daini
*** Fixed “Input” rule displaying incorrect and missing ports in Network -> Firewall -> Traffic Rules
*** Fixed WireGuard VPN endpoint resolving problem
*** Peer cache is no longer deleted when ZeroTier service is restarted
*** Fixed RMS data collection about the list of devices connected to WiFi
*** Fixed showing incorrect Internet state in RMS
*** Fixed WiFi client info display in RMS
*** Implemented error handling when device is blocked or unrecognized by RMS
*** Fixed L2TP client sometimes not adding routes on successful connection
*** Fixed NTP time sync with browser functionality in some edge cases
*** Fixed reinstalled packages" verification when device name is changed
*** Fixed an issue where signal query would return invalid value instead of error in case of no signal in MQTT Publisher service
*** Fixed OpenVPN firewall rule creation for both IPv4 and IPv6
*** Fixed OpenVPN server crash loop after changing authentification from TLS to Static Key
*** Fixed IPsec VPN connection problem with small lifetime values
*** Fixed IPsec "Default Route" not working when Flow Offloading is enabled
*** Fixed an issue where system directory could be used as a mount point in SSHFS service
*** Fixed IP block feature to unblock an OpenVPN IP address on successful authentification
*** Fixed package installation process bug when packages have different architecture names
*** Added "bearer token" authentication functionality in Dynamic DNS
*** Fixed MQTT Broker "local_port" option keep settings migration
*** Remove public keys when key-based authentication is disabled in Access Control
*** Fixed "Parity" field "Mark" and "Space" options being ignored in DNP3 Serial services
*** Corrected SNMP MIB file syntax according to standards
*** Fixed returned port count in SNMP
*** Fixed disabled CLI remote access taking up a session slot
*** Fixed received SMS messages parsing with trailing whitespaces
*** Fixed VPN status rule message text in SMS Utilities
** <b>WebUI</b>
*** Fixed empty events cards in Overview page when no content is available
*** Fixed modal form inputs not clearing upon closing after nested modal is saved
*** Fixed select menu closing when selecting custom option
*** Fixed multi select expanding table row when adding new values
*** Fixed global section caching after deleting a section in a table
*** Fixed unpredictable search logic in tables
*** Fixed firewall zone and rule creation/deletion on VPN configuration creation/deletion
*** Fixed STP enabling issue in Interfaces
*** Fixed EIGRP status info in Dynamic Routes
*** Fixed issue with custom DHCP options where you could not have multiple values per rule
*** Fixed Routing/NAT Offloading section display in Network -> Firewall -> General Settings when device is not supported
*** Fixed SSH/HTTP/HTTPS/ICMP setting in Network -> Firewall -> Attack Prevention page
*** Fixed failing Firewall rules with united protocol formats
*** Fixed zone select component not closing options menu when selecting an option in Firewall pages
*** Fixed memory leak when cancelling file uploads on Chromium-based browser
*** Fixed group settings saving by removing deprecated ":section" routes in Administration -> User Settings -> System Users
*** Fixed allowing IDs above 247 in Modbus Client service
*** Fixed selecting SIM in Modbus Client service Alarms
*** Fixed Modbus Alarm telephone number limit
*** Fixed to show available options for test requests on error in Modbus Client service
*** Fixed Modbus Alarm I/O pin display values
*** Fixed issue when creating instance named "gre" does not show in GRE VPN
*** Remote endpoint field now allows underscore character in IPsec VPN
*** Fixed ZeroTier wrong service status display in Status -> Services
*** Fixed problems with L2TP/PPTP VPN firewall rules automatic creation
*** Fixed problem related to the enable/disable toggle in OpenVPN instance overview page
*** Added fixes for key-direction missing problem when uploading OpenVPN config file
*** Fixed login page read-only inputs after custom user logout
*** Fixed issue when double clicking firmware upgrade cancel button returned error
*** Fixed Package Manager prompt message to appear when package requires network restart
*** Fixed showing in queue packages when they contained special symbols in the Package Manager page
*** Fixed various visual Side Widget bugs
*** Fixed Data to Server DNP3 filter from flash display
*** Fixed incorrect source data displayed in Realtime Data -> Connections table
*** Fixed memory expansion confirmation prompt title
*** Fixed incorrect configuration saving in Hotspot 2.0 service
*** Disabled password hashing for new user creation in Hotspot service
*** Fixed Hotspot landing page themes saving bug
*** Fixed test email sending to more than one recipient in Events Reporting page
*** Fixed VLAN OID values in SNMP service
*** Output proper error message in case of hardware not being supported in Firmware Upgrade
*** Fixed being able to open side widget when user does not have read access
*** Fixed profile creation when current configuration is not present
*** Fixed wrong protocol data display in "Access control" page
*** Fixed carrier aggregation information when no connection is made or SIM card is not inserted
*** Changed representation of mobile cell ID from hexadecimal to integer type
*** Fixed 5G connection signal strength values display
*** Fixed cell info and signal value parsing for 5G SA connection
*** Fixed Mobile Utilities "SMS forwarding to HTTP" URL generation
*** Fixed an issue where sometimes bands were not represented correctly on certain modems
*** Fixed provider information and IMSI value representation when SIM and modem cannot provide this information
*** Fixed mobile pages throwing 404 error when modem disconnects
*** Fixed WebUI showing mobile connection when no SIM card is inserted
*** Fixed error when user has no write permissions in Speed Test page
** <b>System</b>
*** Patched CVE-2023-0464 vulnerability
*** Patched CVE-2023-0465 vulnerability
*** Patched CVE-2023-2602 vulnerability
*** Patched CVE-2023-3772 vulnerability
*** Patched CVE-2023-4128 vulnerability
*** Patched CVE-2023-1077 vulnerability
*** Patched CVE-2023-3776 vulnerability
*** Patched CVE-2023-33476 vulnerability
*** Patched CVE-2023-28484 vulnerability
*** Patched CVE-2023-29469 vulnerability
*** Patched CVE-2023-31490 vulnerability
*** Patched CVE-2023-35001 vulnerability
*** Patched CVE-2021-36369 vulnerability
*** Patched CVE-2023-48174 vulnerability
*** Delayed Custom Scripts execution on boot, after storage devices are mounted
*** Fixed Custom Scripts permissions after save
*** Changed certificate expiry calculation mechanism to fix Y2K38 bug
*** Fixed downloading of certificates that have a space in their name in Administration -> Certificates -> Certificates Manager
*** Fixed Events Log database rotation to prevent log partition space exhaustion
*** Fixed duplication and sorting of all events IDs in Events Log
*** Fixed FOTA crash when current hours is with leading 0
*** Fixed crontab job removal after disabling FOTA
*** Changed Mosquitto build options to not include cJSON library
*** Fixed device name resetting to default upon refresh in Administration
*** Fixed log messages not showing sent SMS info

===<b>[[Media:TRB5_R_00.07.04.5_WEBUI.bin|TRB5_R_00.07.04.5]]</b> | 2023.07.24===

* <b>Improvements</b>
** <b>Network</b>
*** Added metric field support in BGP Route-maps page

* <b>Fix</b>
** <b>Network</b>
*** Fixed an issue with MBN selection when device is started for the first time
*** Fixed an issue where MBN activation would not be successful
*** Fixed service provider parsing when operator does not provide all fields for Quectel modems
*** Fixed device showing 5G connection when 5G connection is not established or configured
*** Fixed modem not establishing mobile connection by failing to parse MBN list

===<b>[[Media:TRB5_R_00.07.04.4_WEBUI.bin|TRB5_R_00.07.04.4]]</b> | 2023.06.26===

* <b>Improvements</b>
** <b>Network</b>
*** Improved mobile operator query methods and operator name parsing in various services
*** Improved the reboot sequence in case of CEFS issues
** <b>Services</b>
*** Improved UPNP lease file validation
** <b>System</b>
*** Device name is now displayed in browser tab when in login page

* <b>Fix</b>
** <b>Network</b>
*** Fixed a connection issue with bridge/passthrough mode when reconnecting ethernet cable
*** Fixed long mobile operator list parsing for whitelist/blacklist functionality
*** Patched CVE-2023-32233 vulnerability
*** Fixed registration status value bug when performing SIM switch
*** Fixed possibility to add a network that is not yet created on a firewall zone

** <b>Services</b>
*** Fixed connection establishment for RMS MQTT service
*** Implemented partial restart when connection with RMS server fails
*** Fixed device name resetting to default upon WebUI page refresh
*** Fixed being able to set device name without passing validations
*** Fixed WireGuard port change in firewall traffic rule when modifying instance port

===<b>[[Media:TRB5_R_00.07.04.3_WEBUI.bin|TRB5_R_00.07.04.3]]</b> | 2023.05.11===

* <b>Improvement</b>
** <b>System</b>
*** Removed SSH RSA key generation
*** Added SSH ECDSA key generation

* <b>Fix</b>
** <b>Network</b>
*** Fixed an issue with mobile when Call Utilities configuration is invalid
*** Fixed mobile connectivity in bridge mode after firmware upgrade
*** Fixed an issue where sometimes PIN/PUK code was deleted when performing a SIM switch
** <b>Services</b>
*** Fixed incorrect mobile data usage provided to RMS service


===<b>[[Media:TRB5_R_00.07.04.2_WEBUI.bin|TRB5_R_00.07.04.2]]</b> | 2023.04.18===

* <b>New</b>
** nftables support

* <b>Improvement</b>
** <b>Network</b>
*** Added PDP profile registry and LTE SMS format functions & management for the Verizon network
*** Improved SIM detection algorithm
*** Improved Multi-APN connection establishment time
** <b>WebUI</b>
*** Improved Overview page performance
** <b>System</b>
*** Changed hostname to router name
*** Updated OpenSSL to version 1.1.1t
*** Updated CA certificates to version 20211016
*** Updated libiwinfo to version 2022-08-19

* <b>Fix</b>
** <b>Network</b>
*** Fixed IPv4, IPv6 mobile connection restarts
*** Fixed operator scanning when mobile interface is disabled
*** Fixed data limit and tracking when software flow offloading is enabled
*** Added network reload call before bringing the mobile interface up
*** Fixed Port-based VLAN ID calculation issue
*** Fixed PDP context authentication when using special characters
** <b>Services</b>
*** Fixed event text for configurable inputs/outputs on I/O Juggler
*** Fixed I/O PIN3 value not changing via MODBUS TCP
*** Added I/O status request error handling in various WebUI pages when the I/O service is booting up
*** Fixed wrong timezone returned issue in Operator Station Synchronization & Timezone Synchronization
*** Fixed MODBUS TCP Slave memory leak issue when requesting mobile parameters
*** Fixed OpenVPN enabling/disabling when using Password or TLS/Password authentication modes
*** Fixed OpenVPN keep alive setting migration issue
*** Fixed PPTP server name setting migration issue
*** Fixed missing WebUI issue caused by Email Relay installation
*** Fixed NTP's Operator Station Synchronization memory leak issue
*** Fixed test email validation
** <b>System</b>
*** Fixed libcares vulnerability CVE-2022-4904
*** Fixed frr vulnerability CVE-2022-37035
*** Removed ability for non root users to edit scripts that get executed as root

===<b>[[Media:TRB5_R_00.07.04.1_WEBUI.bin|TRB5_R_00.07.04.1]]</b> | 2023.03.24===

* <b>Fix</b>
** <b>Network</b>
*** Fixed Data Limit issue

===<b>[[Media:TRB5_R_00.07.04_WEBUI.bin|TRB5_R_00.07.04]]</b> | 2023.03.07===

* <b>Improvements</b>
** <b>WebUI</b>
*** Improved data persistence between page refreshes
*** Improved page navigation behavior
*** Improved redirect logic to open configuration edit modals
*** Updated the 'Status -> Mobile' page
*** Updated interface card in the Overview page
*** Separated Sent and Received data bars on the chart in the Mobile Usage page
** <b>Network</b>
*** Added an info message displayed when a faulty SIM card is inserted
*** Added ResIOT operator's APNs to the APN database
*** Improved mobile connection re-establishment after reboot
*** Improved mobile connection recovery in cases where it was lost unexpectedly
*** Improved 'Deny data roaming' operation when switching between operators
*** Improved mobile throughput offloading into LAN
** <b>Services</b>
*** Added MQTT support to I/O Juggler
*** Added an error message when trying to send an SMS from the 'Send Messages' page with no SIM card inserted
*** Changed the behavior of setting the 'Write to config' flag in the 'mobileoff' SMS rule
*** Added argument support for the 'Execute custom script' SMS rule
*** Added a frequency option 'schedule' Modbus Master
*** Added pagination to Events Reporting overview
*** Added limit to Events Reporting rule list
*** Added email logging for Events reporting
*** 'Sync with browser' button in the NTP page now also synchronizes the time zone
*** Added a limit of 30 for NTP instances
*** Made Networks selections in the 'Traffic Logging' page to display interface choices dynamically
*** Added "make before break" option to IPsec configuration
*** Added MODBUS TCP connection handling layer to MQTT-MODBUS Gateway
*** Improved MODBUS Master connection handling to reduce connection count
*** Updated modbus request error messages 
*** Added OpenVPN server ip block support
*** Added MQTT support for MODBUS Master alarms
*** Added the possibility to get the device's Ethernet port data via SNMP
** <b>System</b>
*** Updated bash to version 5.1.16
*** Extended firmware validation messages
*** Added detailed FW update failure error message to Events Log
*** Improved firmware upload/validation error messages
*** Updated Turkish language support
*** Added protocol column to IP block page
*** Added "vpns.log" file to the Troubleshoot package
*** Added Wireguard tunnel information to the Troubleshoot package
*** Updated default admin group access rights
*** Updated DFOTA notification to show "More info" only when the update is forced

* <b>Fix</b>
** <b>WebUI</b>
*** Fixed mobile status missing RSRP, RSRQ and SINR values on 5G NSA connection type
*** Fixed issue when '3G only' SIM card is used
*** Fixed MAC address showing on mobile interfaces
*** Fixed mobile cell ID displaying in hexadecimal
*** Fixed mobile data limit card creation in the Overview page
*** Fixed modem widget disappearing from the Overview page
*** Fixed Services page not displaying data after Thingworx package is installed
** <b>Network</b>
*** Fixed interface priority change issue
*** Fixed a Custom Firewall Rule editing issue
*** Fixed DMZ configuration saving while it is disabled
*** Fixed Port Scan script execution failure
*** Fixed Firewall zone duplication issue
*** Fixed call function when VoLTE is disabled
*** Fixed VoLTE control when IMS is not enabled
*** Fixed mobile IPv6 IP checking when the device didn't get a correct IP address
*** Fixed APN authentication when using empty credentials
*** Fixed manual APN selection from list
*** Fixed interface creation logic so that no more than one mobile interface can be created
*** Fixed device reachability via USB when LAN to WAN is enabled
** <b>Services</b>
*** Fixed I/O Scheduler overlapping instances issue
*** Fixed Input/Output image pin colors
*** Fixed issue that causes ADC subscribers to receive notifications for when ACL is active
*** Added limitations on message size and quantity of email messages in Email to SMS
*** Fixed SMTP HELLO value parsing issue
*** Fixed SMS message window reset button
*** Fixed not being able to save empty 'Message text' field in Auto Reply
*** Fixed multi-part SMS concatenation
*** Fixed multi-part SMS processing
*** Fixed SMS error message on 'Mobile Data Reset' action
*** Fixed Data To Server JSON format %n, %N and %s flag issues 
*** Fixed Events Reporting email data clean
*** Fixed Events Reporting missing config selections
*** Fixed GRE Tunnel's 'Tunnel source' field validation when the source is custom
*** Fixed IPsec instance deletion after removing DMVPN package
*** Fixed IPSec migration via Backup file when DMVPN is configured
*** Fixed IPsec naming issue when the includes an equals sign
*** Fixed L2TP over IPsec connection dropping issue when connecting from a Windows client
*** Fixed MODBUS database size limiting issue 
*** Fixed MODBUS MQTT Gateway client ID input
*** Fixed MODBUS TCP Slave RSSI value
*** Fixed MODBUS test button returning errors when several non-connected devices are configured
*** Fixed NTP Etc/GMT+1 and Etc/GMT-1 time zones
*** Fixed OpenVPN password validation when no CA certificate is uploaded or 'custom' template is selected
*** Fixed OpenVPN Static Key configuration saving by making Static key upload required
*** Fixed OpenVPN TLS client creation issue while LAN is down
*** Fixed Package Manager displaying non-existent packages
*** Fixed Package Manager errors showing up after successful installations
*** Fixed Periodic Reboot entry duplication after a power cycle
*** Fixed PPTP 'Client to client' option not being applied after save
*** Fixed receiving excessive device state emails after a reboot is initialized over RMS
*** Fixed WebUI unavailability after unsuccessful package install
** <b>System</b>
*** Fixed vulnerabilities CVE-2022-3524, CVE-2022-3566, CVE-2022-3567, CVE-2022-39188, CVE-2022-45934, CVE-2022-47929
*** Fixed bash vulnerability CVE-2022-3715
*** Fixed CGI-IO file download vulnerability CVE-2022-38333
*** Fixed libxml2 vulnerability CVE-2022-40304
*** Fixed libcurl vulnerabilities CVE-2022-43551 and CVE-2022-43552
*** Fixed mobile network type LED indications when device is in Bridge or Passthrough modes
*** Fixed LAN port LEDs staying on after being disabled
*** Improved file upload logic
*** Fixed GPL firmware compilation with selected Tinc package
*** Fixed OpenVPN Static Key migration via keep settings issue
*** Fixed NTP time zone name setting migration when the name contains whitespaces
*** Fixed language setting issue
*** Fixed integer validation on industrial services
*** Fixed LED indications when PDP type is IPv6
*** Fixed issues with PDP type and SMS limit period migration via keep settings

===<b>[[Media:TRB5_R_00.07.03.4_WEBUI.bin|TRB5_R_00.07.03.4]]</b> | 2023.02.09===

* <b>Fix</b>
** <b>Network</b>
*** Changed generic modem restart method
*** Fixed mobile page VoLTE switching issues
** <b>Services</b>
*** Sanitized tcpdump storage location

===<b>[[Media:TRB5_R_00.07.03.2_WEBUI.bin|TRB5_R_00.07.03.2]]</b> | 2023.01.13===

* <b>New</b>
** <b>System</b>
*** Japanese language

* <b>Improvements</b>
** <b>Network</b>
*** Optimized mobile netifd script installation

* <b>Fix</b>
** <b>Network</b>
*** Shortened modem hang monitor timeout
*** Fixed VLAN option setting when changing VLAN ID

===<b>[[Media:TRB5_R_00.07.03.1_WEBUI.bin|TRB5_R_00.07.03.1]]</b> | 2023.01.03===

* <b>Improvements</b>
** <b>System</b>
*** Remove front-end certificate validation
** <b>Network</b>
*** Improved 5G connection evaluation
*** Optimized mobile netifd script installation

* <b>Fix</b>
** <b>Network</b>
*** Fixed modem communication validation
*** Fixed connection establishment in IPv6 only mode
*** Fixed memory leak pn Port Events
*** Fixed SIM PIN persistent storing
*** Added renegotiation option for ethtool 
** <b>Services</b>
*** Fixed libxml2 vulnerability CVE-2022-40303
*** Fixed an IPsec Phase one & two setting migration issue
** <b>System</b>
*** Fixed JSON key parsing; keys can now be any printable character sequence
*** Fixed memory leak in 'session' module
** <b>WebUI</b>
*** Fixed file pretty name parsing

===<b>[[Media:TRB5_R_00.07.03_WEBUI.bin|TRB5_R_00.07.03]]</b> | 2022.12.16===

* <b>New</b>
** <b>Network</b>
*** Firewall DMZ page
** <b>Services</b>
*** Java package
*** SFTP server support
*** OPC UA client
** <b>System</b>
*** Portuguese language
*** Spanish language
*** Turkish language
*** Email Relay package
** <b>WebUI</b>
*** New Web menu design

* <b>Improvements</b>
** <b>Network</b>
*** Updated modem handling, attachment, tracking and connection establishment processes
*** Added the possibility to select multiple ports in all firewall port fields
*** Added 'Match' traffic by type option to firewall traffic rules
*** Added DNS servers and routing table fields to the Wireguard page
*** Improved generating network topology
*** Moved Relayd, UDP Relay & Static Leases to the Interfaces menu section
*** Update Firewall Traffic Rules page with DSCP and MARK options
*** Added keepalive, holdtime and connect timers to BGP configuration
*** Added 'Use gateway metric' to network protocols web interface
*** Added more DHCPv6 client events to system log
*** Moved IP Filter rules from Modbus TCP Gateway and Over IP services to Firewall page
*** Added option to select subnet parameters in mobile Passthrough/Bridge modes 
*** Added WhereverSIM operator APN and fr.lebara.mobi APN to APN database
*** Added mobile connection state for IPv6
** <b>Services</b>
*** Added the possibility to switch profiles on GPS geofencing events
*** Added satellite count and accuracy columns to GPS Map page
*** Added execute custom script SMS Utilities rule
*** Added receiver and transceiver mode support to SMPP
*** Added timezone synchronization with GSM operator option to NTP Client
*** Updated Zerotier web interface
*** Added IPsec Flush connection option on tunnel initialization
*** Added MODBUS slave regfile validation
*** Added delay, number of timeouts, always reconnect options to MODBUS Master service
*** Added DMVPN Phase 2 and Phase 3 support
*** Added synchronization counting to NTP client
*** Expanded the data that is sent to the Cumulocity cloud with device log, mobile data usage nd GPS data
*** Added 'Unregister' button to RMS page
*** Added new data monitoring options to SNMP: configuration state of wireless, smart queues & VLANs
*** Updated Zerotier package to version 1.10.1
*** Added automatic package removal upon failed installation in Package Manager
*** Added option to describe custom routing table and MTU auto counting to Wireguard VPN
*** Added IP blocking to MQTT Bridge for failed login attempts to prevent bruteforce attacks
*** Updated sqm-scripts to version 1.5.1
*** Improved MODBUS Master service: added multiple datatypes, added multiple register reading for alarms
*** Added monthly reboot option to periodic reboot function
*** Added support for multiple custom option selection to SSTP configuration
*** Added PKCS12 certificate chain support to OpenVPN
*** Improved MQTT to support multiple port listening, multiple bridge connections, notification settings and added support for custom configuration file
*** Added QoS selection to MQTT Modbus Gateway
*** Improved RAM usage during upload and installation of packages via Package Manager 
*** Updated curl to version 7.86.0
*** Added brute-force prevention measures to Post/Get
*** Added automatic private and public key generation to Wireguard VPN
*** Added multiple Remote source IP support to IPsec
*** Added the possibility to configure multiple IPsec phase 1 and phase 2 proposals
*** Added functionality to rotate log file when log is saved to Flash memory
*** Improved performance while fetching packages on repeat visits to the Package Manager page
*** Added internal error handling subsystem for I/O Manager
*** Added port events support
** <b>System</b>
*** Added a 'test mail' button to the Administration -> Recipients page
*** Added option to clear blocked IPs in the Access Control page after reboot
*** Updated Web Request-Response core logic
*** Added certificate validation to all services that support certificate upload
*** Updated URL protocol validations
*** Removed profile update requests during Save & apply
*** Optimized profile switching logic
** <b>WebUI</b>
*** Added an indication to the Interfaces page that displays when data limit is enabled
*** Added bootloader version to the Device section in the System page
*** Added configuration page shortcuts to Overview page widgets
*** Added tooltip in Overview that show free, used and total RAM/Flash values on mouse cursor hover
*** Updated network interfaces protocols web interface
*** Updated 404 page to include navigation menu
*** Implemented modem temperature display

* <b>Fix</b>
** <b>Network</b>
*** Fixed jumbo frames MTU issue
*** Added the 'Any' choice to source & destination IP address field in NAT rule edit
*** Fixed NHRP web interface issues
*** Fixed WAN interface configuration interfering with LAN
*** Fixed mdcollect memory leak issue
*** Fixed data limit not resetting properly
*** Fixed incorrect mobile data usage calculations for multiple day periods
*** Fixed an Auto APN 'Keep settings' issue
*** Fixed data counting after mobile data limit has been reached
*** Fixed mobile band not setting correctly on first try
*** Fixed incorrect data limit conditions causing unwanted SIM switches
*** Fixed Passthrough DHCP lease time setting
*** Fixed mobile bridge mode issue when no DNS servers are supplied
*** Added new Operator Lists instance name validations
*** Fixed 5G connection state checking
*** Fixed LED operation when device is connected to 5G 
*** Fixed mobile passthrough mode for single ethernet port devices
** <b>Services</b>
*** Fixed relay state switching
*** Fixed Save & Apply issue with ADC/ACL type condition on I/O Juggler
*** Added I/O restart on configuration profile change
*** Fixed I/O voltage range display for power socket pins
*** Fixed SMNP OID for I/O state
*** Fixed I/O Juggler SMS text message Save & Apply issue
*** Fixed Delay field in GPS HTTPS/HTTP Server Settings section 
*** Fixed AVL packet timestamp display 
*** Fixed issue that prevented GPS map display after clearing cache 
*** Removed unnecessary field from the Port Mirroring page
*** Fixed UCI SMS Rule return message to display new changes
*** Fixed DNP3 issues when asking for modem temperature
*** Fixed base64 encoding of SMS messages when forwarding to HTTP
*** Fixed SMS sending issues when using multiple APN
*** Added Gateway modem option to IP Block and WoL in SMS Rule edit
*** Fixed unblocking IP addresses with an SMS message
*** Fixed Mobile Utilities page not load properly on some occasions
*** Fixed dbus vulnerability CVE-2020-35512
*** Fixed dnsmasq vulnerability CVE-2022-0934
*** Fixed ext4 vulnerability CVE-2021-3428
*** Fixed kernel vulnerabilities CVE-2021-3669, CVE-2021-4203, CVE-2022-1353, CVE-2022-3435, CVE-2022-20008, CVE-2022-30594 
*** Fixed libxm12 vulnerability CVE-2022-29824 
*** Fixed Linux vulnerabilities CVE-2021-4148, CVE-2022-0480, CVE-2022-1055, CVE-2022-0886, CVE-2022-2663, CVE-2022-36879 for v5.4
*** Fixed MQTT DoS vulnerability CVE-2021-41039
*** Fixed privoxy vulnerability CVE-2021-44542
*** Fixed python3 vulnerability CVE-2022-42919
*** Fixed strongswan vulnerabilities CVE-2021-41991, CVE-2021-45079
*** Fixed uboot vulnerabilities CVE-2022-30552, CVE-2022-30790
*** Fixed switching between RMS connection types while the device is unregistered
*** Fixed reload issues in website blocking feature
*** Fixed IPsec PSK secret required field validation
*** Fixed bandwidth limiting after QoS is enabled for the first time
*** Fixed Dropbear issues when logging in over IPv6
*** Fixed Modbus status in Status -> Services page
*** Fixed Azure IoT Hub application issues when sending large volumes of data
*** Fixed Azure IoT Hub MQTT password validation
*** Fixed DMVPN configuration migration issue
*** Fixed DMVPN duplicate select options, added suffix to mobile interfaces to use IPv4
*** Fixed DMVPN IPsec connection issue
*** Fixed DMVPN mobile interface 'Keep settings' migration issue
*** Fixed Dynamic DNS long hostname text display issue
*** Fixed Events Reporting memory leak issue
*** Fixed Events Reporting not triggering after flipping an I/O slider
*** Fixed FOTA cron job not starting after factory reset
*** Fixed IPsec local firewall option parsing
*** Fixed IPsec tunnel creation issue when compatibility mode is used and the tunnel name contains an underscore
*** Fixed L2TP, PPTP, SSTP state display in the Status -> Services page
*** Fixed NTP pool hostname validation
*** Fixed OpenVPN certificate remove with Static key and TLS authentication methods
*** Fixed OpenVPN configuration saving issue when using HMAC key authentication
*** Fixed OpenVPN custom dev name transformation to correct format
*** Fixed OpenVPN device name setting logic when uploading config from file
*** Fixed OpenVPN instance status display
*** Fixed OpenVPN TAP (bridged) configuration detection
*** Fixed Qos configuration saving issue occurring after instance deletion
*** Fixed RMS JSON incorrect WAN state and IP information
*** Fixed RMS step access issue in the Setup Wizard page
*** Fixed SNMP issues after reboot while using a Hotspot
*** Fixed SNMP generating MIB files for devices in accordance with to their hardware
*** Fixed SNMP traps not working after SNMP is installed from server
*** Fixed SSTP client route creation issue
*** Fixed UPNP secure mode not turning off issue
*** Fixed Wireguard route to endpoint issue
*** Fixed manual package installation for queued packages
*** Fixed NAT Rules dependency from IPsec web instance
*** Returned usleep utility
*** Updated Australian and South African NordVPN server IP addresses
** <b>System</b>
*** Fixed certificate signing issues
*** Fixed Telnet, CLI access blocking after max invalid tries
*** Fixed FW upgrade with 'Keep settings' while low free space is available
*** Fixed backup file duplication issue
*** Fixed network device handling in system
** <b>WebUI</b>
*** Fixed side widget accessibility during first login
*** Fixed file upload issues
*** Fixed drag and drop issue in the Traffic Rules page
*** Fixed protocol display in the overview of the Interfaces page
*** Fixed blocked IP settings migration during a FW upgrade with the 'Keep settings'
*** Fixed login errors after browser tab restoration
*** Fixed redirect to newly set IP address after Interface configuration
*** Fixed firmware upgrade verify spinner not closing
*** Fixed an issue with file upload via drag and drop

===<b>[[Media:TRB5_R_00.07.02.8_WEBUI.bin|TRB5_R_00.07.02.8]]</b> | 2022.09.16===

* <b>New</b>
** Initial firmware release