View source for TRB247 Firmware Downloads

{{Template: Networking_rutos_firmware_downloads
<!------------------------DEVICE----------------------->
| name         = TRB247
| series       = TRB2M
}}

==Changelog==
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.16.6/TRB2M/TRB2M_R_00.07.16.6_WEBUI.bin TRB2M_R_00.07.16.6]</span></b> | 2025.09.17===
* <b>Fix</b>
** <b>System</b>
*** Profiles: fixed keep-settings execution for older profiles
----
<!--NEW_FW-->
===<b>TRB2M_R_00.07.18</b> | 2025.10.01===
<b>Note:</b> This firmware version has been withdrawn due to a critical issue with incorrect mobile operator selection under specific conditions.
* <b>New</b>
** <b>Network</b>
*** Mobile: added historical signal information display
*** Mobile: added "internet" APN for "Telenor" operator to APN database
* <b>Improvements</b>
** <b>Network</b>
*** DHCP server: added option 82 support to DHCP relay
*** Mobile: added SIM switch historical data
*** Mobile: improved SIM switch status information
*** SSHFS: updated mount point location
*** Dnsmasq: updated version to 2.90
*** Iperf3: updated version to 3.19.1
** <b>Services</b>
*** DLMS: improved COSEM value reading speed
*** DNP3 Client: added DNP3 client support for universal gateway
*** DNP3 Outstation: increased status report responsiveness
*** Event juggler: added new GPS operator 'Enter/Exit' for geofencing trigger
*** GPS: added warnings to NMEA sentence API endpoints
*** GPS: improved map loading logic to load modules only when needed
*** Input/Output: added "time" and "delay" options to I/O state change API endpoint
*** IPsec: added requirement for local certificate and key fields when X.509 authentication method is selected
*** IPsec: added improvements for IPv6 support
*** Modbus Client: increased test button and status report responsiveness
*** Modbus Client: made number zero as valid server ID
*** Modbus Client: added broadcast support
*** Modbus Server: increased status report responsiveness
*** Modbus Server: added broadcast support
*** MQTT Modbus Gateway: added broadcast support
*** OpenVPN: removed disabled state from "logs" and "active clients" when user has no write permissions
*** OpenVPN: improved error messages
*** OpenVPN: added user and password options for export client configuration
*** SMS Utilities: added a warning about enabled SMS limit
** <b>System</b>
*** Access Control: added JSON-RPC enable toggle
*** JSON-RPC: moved to Package Manager
*** Update Firmware: added event log item about modem firmware update
*** WebUI: added indicators when a form input inside an inactive tab was changed or invalid
*** WebUI: added "Skip to main content" accessibility feature
*** WebUI: improved multi select design
*** WebUI: improved styles of drag hint on smaller screens
*** WebUI: improved consistent formatting across all hints
* <b>Fix</b>
** <b>Network</b>
*** 802.1X Server: fixed redirect link to "Radius" page
*** 802.1X Server: fixed unsupported Guest VLAN option being displayed
*** Mobile: fixed excessive SIM switching after changing configuration
*** Mobile: fixed segmentation fault during SIM switching
*** Mobile: fixed APN database backup and restore functionality
*** Multi WAN: fixed incorrect log trigger
*** VLAN: fixed VLAN device up/down loop when VLAN 0 is used
** <b>Services</b>
*** Data to Server: fixed Modbus input raw data sending when data type is Modbus PDU
*** Email to SMS: fixed service's installation when installed via Package Manager
*** GPS: fixed an issue where GNSS location would not be updated due to unsynchronized GGA and RMC sentences
*** Hotspot: fixed console errors that occurred in certain scenarios when enabling or disabling an instance
*** IPsec: fixed field validation to support % in custom options
*** Modbus Client: fixed PDU data type data collection
*** OpenVPN: fixed permissions for using IP Block
*** RMS: fixed RMS authentication under poor internet conditions
*** SMS Utilities: fixed mobile data usage display when mobile data is turned off
*** SMS Utilities: fixed incorrect 'Firmware on server' status message shown without internet connection
*** Stunnel: fixed disabled state of "enable" switch in overview page
*** Zerotier: fixed excessive ARP flooding on Zerotier interfaces
** <b>System</b>
*** Administration: fixed "User group" input validation
*** API Core: fixed double quoted boundary parsing
*** Kernel: fixed compilation of 'fs-cifs' kernel module package
*** Profiles: fixed endpoint response when calling from internal API
*** UI Core: fixed 'Save & Apply' button reachability on mobile devices
*** Update Firmware: fixed incorrect FOTA address in SDK
*** WebUI: fixed text-area width issues on small screen devices
* <b>CVE Patches</b>
** CVE-2025-6021
** CVE-2025-32415
** CVE-2025-49794
** CVE-2025-49796
----
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.17.5/TRB2M/TRB2M_R_00.07.17.5_WEBUI.bin TRB2M_R_00.07.17.5]</span></b> | 2025.09.30===
* <b>Improvements</b>
** <b>Network</b>
*** Mobile: added ability to download eSIM profiles via Setup Wizard
* <b>Fix</b>
** <b>Network</b>
*** Mobile: fixed possible hang when downloading eSIM profile
*** Network: fixed assigning interface to incorrect firewall zone when changing its settings
----
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.17.4/TRB2M/TRB2M_R_00.07.17.4_WEBUI.bin TRB2M_R_00.07.17.4]</span></b> | 2025.09.17===
* <b>Fix</b>
** <b>System</b>
*** Profiles: fixed keep-settings execution for older profiles
----
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.17.3/TRB2M/TRB2M_R_00.07.17.3_WEBUI.bin TRB2M_R_00.07.17.3]</span></b> | 2025.09.05===
* <b>Fix</b>
** <b>Services</b>
*** Web Filter: fixed host blocking with hotspot interfaces
----
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.17.2/TRB2M/TRB2M_R_00.07.17.2_WEBUI.bin TRB2M_R_00.07.17.2]</span></b> | 2025.09.02===
* Initial firmware release
----