View source for SSH RSA key authentication (Windows)

==Introduction==

'''Secure Shell''' ('''SSH''') is a cryptographic network protocol for operating network services securely over an unsecured network. The best known example application is for remote login to computer systems by users.

Typically an SSH login involves specifying a user name, IP address or hostname and the password for the user. When you login to a certain IP address/hostname, the system generates a public/private RSA key pair between the two parties. There is a possibility to login to via SSH using only this '''key''' with the help of the '''dropbear''' service, thus, eliminating the password step. This article provides instructions on how to set up public key authentication for logging in to a RUTxxx router via SSH using a Windows OS. For the Linux guide, click '''[[SSH RSA key authentication (Linux)|here]]'''.

==Prerequisites==

To achieve the configuration described in this article you will need the following:

* A computer running on Windows
* PuTTY client and PuTTYgen (download link '''[https://www.chiark.greenend.org.uk/~sgtatham/putty/latest.html here]''')
* A RUTxxx router of any type

==Configuration==

<ul>
<li>
First, we'll need to generate the '''rsa key'''. For this we'll use '''PuTTYgen''' - a key generator for PuTTY on Windows. It will be installed along with PuTTY automatically, so just search for PuTTYgen in your computer, launch it and click "Generate". A progress bar will appear at the top of the window. Move your mouse pointer around the grey are to generate the key until the progress bar fills up: <br> [[File:How to generate rsa key puttygen 1.PNG]]
</li>
----
<li>
Then copy the contents of the key file and save your key: <br> [[File:How to generate rsa key puttygen 2.PNG]]
</li>
----
<li>
Open PuTTY and make the following changes:
<ul>
<li>
In the "Category" section on the left go to '''Connection → Data''' and set "Auto-login username" to '''root'''; in '''Connection → SSH → Auth''' click browse and select you key file: <br> [[File:Putty ssh key login part 1.PNG]]
</li>
----
<li>
Go back to the "Session" section and enter your router's IP address, select the SSH port ('''22''' by default) and '''SSH''' connection type. Additionally you can enter a name for this configuration and click "Save". This way the next time you wish to login you won't have to set everything up over again. To complete the connection click "Open": <br> [[File:Putty ssh key login part 2.PNG]]
</li>
</ul>
</li>
----
<li>
When you login, paste the contents of the key file to the '''/etc/dropbear/authorized_keys''' file. You can edit files with the '''vi''' command:
<pre>
vi /etc/dropbear/authorized_keys
</pre>
This will open a text editing environment. To start editing, press "'''I'''" on your keyboard. To paste something, right-click where you want the text to appear. To save and close the editor, press "'''Esc'''" on your keyboard, type ''':x''' and press "'''Enter'''".
</li>
----
<li>
Next, while still connected to the router, add ''read'', ''write'' and ''execute'' permissions for the ''/etc/dropbear'' directory and ''read'', ''write'' permissions for the ''/etc/dropbear/authorized_keys'' file:
<pre>
chmod 700 /etc/dropbear
chmod 600 /etc/dropbear/authorized_keys
</pre>
</li>
----
<li>
At this point, the configuration is complete. To test it, terminate your current SSH connection (you can do so by executing the ''exit'' command) and try logging in again - if everything is in order, the router should no longer require a password when connecting via SSH.
</li>
----
<li>
'''Additional notes''':
<ul>
<li>
Other devices will not be able to connect using your key, but keep in mind that if someone gains physical access to your computer, they will be able to connect to the router without a password. 
</li>
<li>
If you're using SSH remotely, don't forget to use the router's public IP address when logging in and enable remote SSH access on the router. You can do that by logging in to router's WebUI and navigating to '''System → Administration → Access Control'''. When there, place a check mark next to the "Remote SSH access field" and click "Save":
[[File:How to enable remote ssh access.png]]
</li>
</ul>
</li>
</ul>

==(Optional) Adding additional security==
<ul>
<li>
You can also add additional security for your router's SSH connections by disabling the password login entirely. To do so, SSH to your router and execute the following commands:
<pre>
uci set dropbear.@dropbear[0].PasswordAuth=off
uci commit dropbear
/etc/init.d/dropbear restart
</pre>
</li>
----
<li>
If you have configured other users besides ''root'' and want to leave access with password ON for them, you can disable password login only for the user ''root'' by executing these commands instead:
<pre>
uci set dropbear.@dropbear[0].RootPasswordAuth=off
uci commit dropbear
/etc/init.d/dropbear restart
</pre>
</li>
----
<li>
'''Additional notes''':
<ul>
<li>
When you disable SSH password authentication, only users with keys will be able to login via SSH. If another user needs access via SSH, you can temporarily enable SSH password authentication until the user in question sets up their authentication. Or the user can generate the key, send it to you and you can add it to the ''/etc/dropbear/authorized_keys'' file.
</li>
<li>
When you disable SSH password authentication, make sure you don't accidentally delete your key as you will not be able to connect to your router via SSH. However, if this does happen, you can still login via the Command Line Interface (CLI) from the router's WebUI ('''Services → CLI''') or other forms of CLI described '''[[Command line interfaces|here]]'''. When you login, simply enable SSH password authentication with these commands:
<pre>
uci set dropbear.@dropbear[0].PasswordAuth=on #### use uci set dropbear.@dropbear[0].RootPasswordAuth=on instead if you had only disabled password authentication for root
uci commit dropbear
/etc/init.d/dropbear restart
</pre>
</li>
</ul>
</li>
</ul>

==See also==

* [[SSH public key authentication (Linux)]] - the same guide but aimed at Linux users
* [[Command line interfaces]] - descriptions and instruction for all types of command line interfaces supported by RUTxxx devices

==External links==

* https://www.chiark.greenend.org.uk/~sgtatham/putty/latest.html - PuTTY downloads page