View source for MQTT broker bridge

== Introduction ==
The goal of this manual is to help configuring '''Teltonika Networking Devices''' to be able to act as a MQTT broker bridge.

== MQTT broker configuration ==
For this example you will need to enable the MQTT broker on your Teltonika device, that can be achieve using these steps. In WebUI navigate to '''Services → MQTT → Broker''':
# Enable '''MQTT broker.'''
# Select the '''Local Port''', in this example we will use port number '''1883'''.
# Enable '''Remote Access'''.
[[File:Netowrking_rutos_configuration_example_MQTT_broker_bridge_1.png|border|class=tlt-border]]

== MQTT broker bridge configuration ==
Next, you will need to add the '''bridge''' configuration. You will need to go down below to '''Bridges''' section. There we will need to add a new instance:

#Choose your desired instance '''name'''.
#Click on the '''Add''' button.
[[File:Netowrking_rutos_configuration_example_MQTT_broker_bridge_2.png|border|class=tlt-border|1000px]]
----

After that you will be prompted to the configuration tab of bridge. You will need to do the following changes:

# Enable the option '''Enable'''.
# Enter the name for this connection, this option is for easy management.
# Enter the '''Remote Address''' of the MQTT broker you want to make the bridge with.
# Enter the '''Remote Port''' of the MQTT broker you want to make the bridge with.

[[File:Netowrking_rutos_configuration_example_MQTT_broker_bridge_3.png|border|class=tlt-border]]

*'''''Note''''': not specified fields can be configured by your own needs.
== Selecting topics ==
For the broker to be able to send the topics across the MQTT bridge you will need to specify the topics in the '''TOPICS''' menu. Example topics are displayed in the image below.


[[File:Netowrking_rutos_configuration_example_MQTT_broker_bridge_4.png|border|class=tlt-border|1100px]]



[[Category:Router control and monitoring]]