View source for NTP001 Power Consumption

'''Averaged''' [[NTP001]] power consumption values in different states of operation are represented in the table(s) below:

<table class="nd-othertables_3">
    <tr style="font-weight:bold">
        <th width=800>Test type</th>
      	<th width=150><center>Current (mA)</center></th>
       	<th width=170><center>Power consumption (W)</center></th>
    </tr>
    <tr>
        <td>LAN devices connected to ALL ETH ports <sup><small>1</small></sup> + high CPU load <sup><small>2</small></sup> + all outputs enabled (9 V) <sup><small>3</small></sup></td>
      	<td><center><b>191.02</b></center></td>
       	<td><center><b>1.72</b></center></td>
    </tr>
    <tr>
        <td>LAN devices connected to ALL ETH ports <sup><small>1</small></sup> + high CPU load <sup><small>2</small></sup> + all outputs enabled (12 V) <sup><small>3</small></sup></td>
      	<td><center><b>142.81</b></center></td>
       	<td><center><b>1.71</b></center></td>
    </tr>
    <tr>
        <td>LAN devices connected to ALL ETH ports <sup><small>1</small></sup> + high CPU load <sup><small>2</small></sup> + all outputs enabled (24 V) <sup><small>3</small></sup></td>
      	<td><center><b>73.44</b></center></td>
       	<td><center><b>1.76</b></center></td>
    </tr>
</table>

<small><sup><small>1</small></sup> - Data streams between NTP001 and other connected LAN devices created using iPerf.</small> <br>
<small><sup><small>2</small></sup> - Load created using ''md5sum'' (calculation and verification of 128-bit MD5 hashes). </small> <br>
<small><sup><small>3</small></sup> - NTP broadcasting, DAYTIME server up, serial connected and receiving date over serial.</small> <br>
<small>Power consumption may differ due to data transmission speed, testing environment and conditions.</small>

[[Category: NTP001 Manual]]