View source for Template:Networking trb16 manual input output status

<pre>
ioman.adc.pwr0
ioman.gpio.dio0
ioman.gpio.dio1
</pre>

In order to read values, call command <b>ubus call <i>value</i> status </b>:

 root@Teltonika-{{{name}}}:~# ubus call ioman.gpio.dio1 status
 {
         "value": "0",
         "direction": "in",
         "bi_dir": false,
         "invert_input": false
 }

<ul>
    <li><b>dio0</b> is configurable input / output:
        <ul>
            <li>"value": "<b>0</b>" means low level state.</li>
            <li>"value": "<b>1</b>" means high level state.</li>
            <li>"direction": "<b>in</b>" means input state.</li>
            <li>"direction": "<b>out</b>" means output state.</li>
        </ul>
    </li>
</ul>

To change input settings, use the <i><b>update</b></i> command and specify a value:

 ubus call ioman.gpio.dio0 update '{"value":"0"}'
 ubus call ioman.gpio.dio0 update '{"value":"1"}'
 ubus call ioman.gpio.dio0 update '{"direction":"in"}'
 ubus call ioman.gpio.dio0 update '{"direction":"out"}'