View source for VLAN trunk over an OpenVPN bridge (TAP)

<p style="color:red">The information on this page is updated in accordance with the [https://wiki.teltonika-networks.com/view/FW_%26_SDK_Downloads'''00.07.17.5'''] firmware version .</p>

=Introduction=

=Configuration overview and prerequisites=

Running OpenVPN brige (TAP):
https://wiki.teltonika-networks.com/view/Connecting_two_same_subnet_office_networks_using_OpenVPN_bridge_(TAP)_on_RUTX


=Topology=


=Setting up VLAN=

Navigate to '''Services -> VPN -> VLAN'''. Add a new OpenVPN instance with a '''Server role''' with these settings:


[[File:OpenVPN server settings v3.png|none|border|left|class=tlt-border]]

1 - <b>Client to client</b> – disabled

2 - <b>Virtual network IP address</b> – 10.0.0.0

3 - <b>Virtual network netmask</b> – 255.255.255.224

4 - <b>Certificate files from device</b> - on


Press '''"Save & Apply"''', enable OpenVPN server and check if the server is online.

[[File:OpenVPN server is online v3.png|none|border|left|class=tlt-border|1100x1100px]]
=Connecting clients to the OpenVPN server=


Repeat this step for as many clients as You need. For this example, we will have 3 clients.
=Client to Client LAN network communication=
==TLS Clients==

==Firewall Zones==



=Testing the setup=


=See also=

<ul>
<li>[[OpenVPN_configuration_examples_RUT_R_00.07]]</li>
<li>[[How to generate TLS certificates (Windows)?]]</li>
<li>[[OpenVPN client on Windows]]</li>
<li>[[OpenVPN client on Linux]]</li>
<li>[[OpenVPN server on Windows]]</li>
<li>[[OpenVPN traffic split]]</li>
<li>[[Configuration file .ovpn upload tutorial]]</li>
<li>[[Firewall traffic rules]]</li>
</ul>


=External links=

https://openvpn.net/index.php/open-source/documentation/howto.html - some additional information on OpenVPN