Jump to content
  • EN

FritzBox and Teltonika WireGuard Configuration example: Revision history

Diff selection: Mark the radio buttons of the revisions to compare and hit enter or the button at the bottom.
Legend: (cur) = difference with latest revision, (prev) = difference with preceding revision, m = minor edit.

11 July 2025

2 July 2025

  • curprev 11:3111:31, 2 July 2025 Matas.R talk contribs 3,960 bytes +3,960 Created page with "__TOC__ ==Introduction== This article provides a configuration example with details on how to configure a WireGuard connection between FritzBox! and Teltonika devices. ==Prerequisites== * Teltonika Networks router (RUT956 will be used in this case) * FritzBox! device * Both devices must have WAN access with the server having a Public IP address. * At least one end device (PC, Laptop) to configure the routers. ==RUTOS device configuration== # Login to the router's W..."
Retrieved from "https://wiki.teltonika-networks.com/view/FritzBox_and_Teltonika_WireGuard_Configuration_example"