465
edits
Changes
→LAN1 General Settings
'''Before proceeding with the confuration, ensure that all requirements are met:'''
'''Before proceeding with the configuration, ensure that all requirements are met:'''
# Before starting you need to have 3 different WAN connections. In this case we are going to use: '''[https://wiki.teltonika-networks.com/view/WiFi_WAN_example Wi-fi WAN]''', '''Wired WAN''' and '''Mobile WAN'''.These interfaces have to be preconfigured.
# Before starting you need to have 3 different WAN connections. In this case we are going to use: '''[https://wiki.teltonika-networks.com/view/WiFi_WAN_example Wi-fi WAN]''', '''Wired WAN''' and '''Mobile WAN'''.These interfaces have to be preconfigured.
Make the following changes:
Make the following changes:
# Enter Name : '''LAN_VLAN_ETH0'''
# Enter Name : '''LAN_VLAN_ETH0'''
[[File:PBS LAN1 NAME.png|border|class=tlt-border|center]]
# Enter IPV4 address: '''192.168.100.1'''
# Select IPV4 netmask: '''255.255.255.0'''
[[File:PBS LAN1 NAME1111.png|border|class=tlt-border|center]]
====LAN1 Physical Settings====
====LAN1 Physical Settings====
=====Static IPv4 Routes=====
=====Static IPv4 Routes=====
----
----
click [[File:Add Button.png|40x70px]] and aplly this to the route:
click [[File:Add Button.png|40x70px]] and apply this to the route:
#Select Interface: '''WifiWan''' | Enter Target: '''0.0.0.0''' | Enter IPv4-Netmask: '''0.0.0.0''' | Enter IPv4-Gateway: '''192.168.1.1 (Note: Use the Wi-Fi network's gateway. The current LAN gateway in use is 192.168.100.1. However, the correct gateway to route correctly will be the next hop address. This means the router gateway providing the Wi-Fi WAN should be used. In my case, this gateway is 192.168.1.1.)'''
#Select Interface: '''WifiWan''' | Enter Target: '''0.0.0.0''' | Enter IPv4-Netmask: '''0.0.0.0''' | Enter IPv4-Gateway: '''192.168.1.1 (Note: Use the Wi-Fi network's gateway. The current LAN gateway in use is 192.168.100.1. However, the correct gateway to route correctly will be the next hop address. This means the router gateway providing the Wi-Fi WAN should be used. In my case, this gateway is 192.168.1.1.)'''
[[File:PBR_P_ROUTE_111.png|border|class=tlt-border|center|1000x300px]]
[[File:PBR_P_ROUTE_111.png|border|class=tlt-border|center|1000x300px]]
=====Static IPv4 Routes=====
=====Static IPv4 Routes=====
----
----
click [[File:Add Button.png|40x70px]] and aplly this to the route:
click [[File:Add Button.png|40x70px]] and apply this to the route:
#Select Interface: '''wan''' | Enter Target: '''0.0.0.0''' | Enter IPv4-Netmask: '''0.0.0.0''' | Enter IPv4-Gateway: '''192.168.3.1'''
#Select Interface: '''Wan''' | Enter Target: '''0.0.0.0''' | Enter IPv4-Netmask: '''0.0.0.0''' | Enter IPv4-Gateway: '''192.168.10.1'''
[[File:PBR_P_ROUTE_2.png|border|class=tlt-border|center|1000x300px]]
[[File:PBR_P_ROUTE_222.png|border|class=tlt-border|center|1000x300px]]
====Creating Mobile Wan Routing Table====
====Creating Mobile Wan Routing Table====
----
----
click [[File:Add Button.png|40x70px]] and aplly this to the route:
click [[File:Add Button.png|40x70px]] and apply this to the route:
#Select Interface:'''mob1s1a1''' | Enter Target: '''0.0.0.0''' | Enter IPv4-Netmask: '''0.0.0.0'''
#Select Interface:'''mob1s1a1''' | Enter Target: '''0.0.0.0''' | Enter IPv4-Netmask: '''0.0.0.0'''
[[File:PBS_TABLES_WAN.png|border|class=tlt-border|center|1000x300px]]
[[File:PBS_TABLES_WAN.png|border|class=tlt-border|center|1000x300px]]
=====Static IPv4 Routes=====
=====Static IPv4 Routes=====
----
----
click [[File:Add Button.png|40x70px]] and aplly this to the route:
click [[File:Add Button.png|40x70px]] and apply this to the route:
#Select Interface: '''WifiWan''' | Enter Target: '''0.0.0.0''' | Enter IPv4-Netmask: '''0.0.0.0''' | Enter IPv4-Gateway: '''192.168.1.1'''
#Select Interface: '''WifiWan''' | Enter Target: '''0.0.0.0''' | Enter IPv4-Netmask: '''0.0.0.0''' | Enter IPv4-Gateway: '''192.168.1.1'''
[[File:PBR_P_ROUTE_111.png|border|class=tlt-border|center|1000x300px]]
[[File:PBR_P_ROUTE_111.png|border|class=tlt-border|center|1000x300px]]