Teltonika Networks Wiki

Changes

DHCP Relay configuration example new (view source)

Revision as of 14:37, 30 July 2024

1,125 bytes added ,  Yesterday at 14:37
Created page with "<p style="color:red">The information on this page is updated in accordance with the [https://wiki.teltonika-networks.com/view/FW_%26_SDK_Downloads00.07.08] firmware version .<..."
<p style="color:red">The information on this page is updated in accordance with the [https://wiki.teltonika-networks.com/view/FW_%26_SDK_Downloads00.07.08] firmware version .</p>
===Introduction===
----
DHCP Relay is a router that forwards IP addresses from the DHCP Server to the user devices, even if the server is on a different network. The main benefit of this approach is that a single DHCP Server can distribute IP addresses to multiple networks. Bellow you will find an example of how to configure a basic DHCP Relay configuration.
​
===Prerequisites & Topology===
----
For this configuration you will need 2 routers. One as a DHCP Server and the other as a DHCP Relay.

[[File:Networking_rutx_manual_lan_static_dhcp_server_relay_scheme_v2.png|border|class=tlt-border]]



===Configuration===
----
{{Template:Networking_rutos_manual_basic_advanced_webui_disclaimer
| series = RUTX
}}

====DHCP Relay Server Configuration====
----
=====Configure Server LAN=====
----
=====Configure Client DHCP lease=====
----
=====Configure Route For DHCP Packets To Reach Client=====
----



====DHCP Relay Client Configuration====
Retrieved from "https://wiki.teltonika-networks.com/view/Special:MobileDiff/129646"