Changes

In order to setup the following configuration SIM card is required.

In order to setup the following configuration SIM card is required.

Go back to '''Services → Modbus → Modbus Serial Client''' and press [[File:Networking edit button fw76 v1.png]] button on the previously created Modbus slave device configuration or create a new one. In the opened window scroll donw to the bottom and in Alarms Configuration section press . Create a name, then press '''Add''' button. When it appears like in the example, press '''Edit'''.

Go back to '''Services → Modbus → Modbus Serial Client''' and press [[File:Networking edit button fw76 v1.png]] button on the previously created '''Modbus''' slave '''Device''' instance or create a new one. In the opened window scroll down to the bottom and in Alarms Configuration section press [[File:Add Button.png|60x90px]].

[[File:Modbus serial rut955 12.png|border|class=tlt-border|1100x700px]]

[[File:Modbus serial rut955 12.png|border|class=tlt-border|1100x700px]]

Then apply the following configuration:

In the opened Alarm configuration window apply the following configuration:

[[File:Modbus serial rut955 13.png|border|class=tlt-border|1100x700px]]

[[File:Modbus serial rut955 13.png|border|class=tlt-border|1100x700px]]

# '''Enable''' instance.

# '''Enable''' instance.