403
edits
Changes
VXLAN Configuration Example Lukas Demo (view source)
Revision as of 07:23, 24 September 2024
, 24 September→Configuration on RUT2 device
----
----
The configuration steps for RUT2 are similar to those performed on RUT1, with some additional adjustments.
The configuration steps for RUT2 are similar to those performed on RUT1, with some additional adjustments. Navigate to the '''Network > WAN''' section in the WebUI, then click the '''Edit''' button for the wired WAN interface.
Navigate to the '''Network > WAN''' section in the WebUI, then click the '''Edit''' button for the wired WAN interface.
[[File:Vxlan_over_wan_config_rut1_wan_p1.png|border|class=tlt-border]]
[[File:Vxlan_over_wan_config_rut1_wan_p1.png|border|class=tlt-border]]
[[File:Vxlan over wired wan settings rut2.png|border|class=tlt-border]]
[[File:Vxlan over wired wan settings rut2.png|border|class=tlt-border]]
Navigate to the '''Network > Devices'''
Navigate to the '''Network > WAN'''
#In '''Add new device''' section select Type '''VXLAN'''
#In '''Add new device''' section select Type '''VXLAN'''
#Press [[File:Add Button.png|50px]]
#Press [[File:Add Button.png|50px]]
[[File:Vxlan over wired vxlan settings rut2.jpg|border|class=tlt-border]]
[[File:Vxlan over wired vxlan settings rut2.jpg|border|class=tlt-border]]
Navigate to the '''Network > LAN'''
[[File:Vxlan over wired lan config rut2.png|border|class=tlt-border]]
[[File:Vxlan over wired lan config rut2.png|border|class=tlt-border]]
[[File:Vxlan over wired lan settings RUT2.png|border|class=tlt-border]]
[[File:Vxlan over wired lan settings RUT2.png|border|class=tlt-border]]
==Configuring VXLAN over 2 Public IP addresses==
==Configuring VXLAN over 2 Public IP addresses==