63
edits
Changes
VLAN Inter-Zone accessibility control configuration example test (view source)
Revision as of 14:38, 24 September 2024
, Tuesday at 14:38no edit summary
A new window will open, there configure the settings according to the points below and press Save & Apply.:
A new window will open, there configure the settings according to the points below and press Save & Apply.:
<table class="nd-othertables_2">
<tr>
<th width=400; style="border-bottom: 1px solid white;></th>
<th width=600; style="border-bottom: 1px solid white"; rowspan=2>[[File:Lan1zonesettingsv2.png|border|class=tlt-border|right]]</th>
</tr>
<tr>
<td style="border-bottom: 4px solid white>
# Name: lan1
# Input: Accept
# Output: Accept
# Forward: Reject
# Covered networks: lan
</td>
</tr>
</table>
'''Note''': By setting the Input and Output zones to '''Accept''' traffic is allowed to enter and leave the zone. '''Forward: Reject''' blocks communication between zones - this is a default policy. '''Inter-zone forwarding''' section can be used to modify the default behavior of the Forward zone and allow communication between zones.
'''Note''': By setting the Input and Output zones to '''Accept''' traffic is allowed to enter and leave the zone. '''Forward: Reject''' blocks communication between zones - this is a default policy. '''Inter-zone forwarding''' section can be used to modify the default behavior of the Forward zone and allow communication between zones.
----
Follow the same steps to create Firewall Zones '''lan2''' and '''lan3'''.
'''Lan2''' zone settings:
* Name: lan2
* Name: lan2