Changes

To disable VLAN to VLAN communication, navigate to '''Network -> Firewall -> General Settings'''. Press '''Edit''' on the '''LAN''' zone (lan -> wan).

To disable VLAN to VLAN communication, navigate to '''Network -> Firewall -> General Settings'''. Press '''Edit''' on the '''LAN''' zone (lan -> wan).

[[File:Lan zone edit.png|border|1000px|class=tlt-border|]]

[[File:Lan zone edit.png|border|1100px|class=tlt-border|]]

Click on '''Forward''' and select '''Drop or Reject'''. Make sure that all created VLANs are added in the Covered networks tab:

Click on '''Forward''' and select '''Drop or Reject'''. Make sure that all created VLANs are added in the Covered networks tab:

To start with, we will need to create new firewall zones: LAN1, LAN2 and LAN3. To add new zones, navigate to '''Network -> Firewall -> General Settings'''. In the Zones section, press [[File:Add Button.png|60x90px]] to add a new zone.

To start with, we will need to create new firewall zones: LAN1, LAN2 and LAN3. To add new zones, navigate to '''Network -> Firewall -> General Settings'''. In the Zones section, press [[File:Add Button.png|60x90px]] to add a new zone.

[[File:Addnewfwzone1v1.png|border|1000px|class=tlt-border|]]

[[File:Addnewfwzone1v1.png|border|1100px|class=tlt-border|]]

A new window will open, there configure the settings according to the points below and press [[File:Save & Apply.png|100x30px]].:

A new window will open, there configure the settings according to the points below and press [[File:Save & Apply.png|100x30px]].:

Newly created firewall zones should look like this:

Newly created firewall zones should look like this:

[[File:Newlycreatedfirewallzonesv2.png|border|1000px|class=tlt-border|]]

[[File:Newlycreatedfirewallzonesv2.png|border|1100px|class=tlt-border|]]