Changes

----

----

The configuration steps for RUT2 are similar to those performed on RUT1, with some additional adjustments. Navigate to the '''Network > WAN''' section in the WebUI, then click the '''Edit''' button for the wired WAN interface.

The configuration steps for RUT2 are similar to those performed on RUT1, with some additional adjustments. Navigate to the '''Network > WAN''' section in the WebUI, then click the [[File:Edit button.png]] button for the wired WAN interface.

[[File:Vxlan_over_wan_config_rut1_wan_p1.png|border|class=tlt-border]]

[[File:Vxlan_over_wan_config_rut1_wan_p1.png|border|class=tlt-border]]

[[File:Vxlan over wired vxlan settings rut2.jpg|border|class=tlt-border]]

[[File:Vxlan over wired vxlan settings rut2.jpg|border|class=tlt-border]]

Navigate to '''Network > LAN''' and click '''Edit''' to modify existing LAN interface.

Navigate to '''Network > LAN''' and click [[File:Edit button.png]] to modify existing LAN interface.

[[File:Vxlan over wired lan config rut2.png|border|class=tlt-border]]

[[File:Vxlan over wired lan config rut2.png|border|class=tlt-border]]

#For testing purposes, both routers should be part of the same LAN segment, so assign unique IP addresses to prevent conflicts.  

#For testing purposes, both routers should be part of the same LAN segment, so assign unique IP addresses to prevent conflicts.