Changes

# Click [[File:Save & Apply.png|90px]] twice

# Click [[File:Save & Apply.png|90px]] twice

[[File:Vxlan_over_wired_wan_settings_rut1.png|border|class=tlt-border]]

[[File:Vxlan_over_wired_wan_settings_rut1.png|border|class=tlt-border]]

 

Navigate to the '''Network > Devices'''

Navigate to the '''Network > Devices'''

#In '''Add new device''' section select Type '''VXLAN'''

#In '''Add new device''' section select Type '''VXLAN'''

#<li value="3">Enter name of the new VXLAN interface

#<li value="3">Enter name of the new VXLAN interface

#Enter VNI (VXLAN Network Identifier). It identifies a specific virtual network in a data plane and performs a function similar to a VLAN ID in regular networks. The same VNI have to be used in RUT2 VXLAN interface settings.

#Enter VNI (VXLAN Network Identifier). It identifies a specific virtual network in a data plane and performs a function similar to a VLAN ID in regular networks. The same VNI have to be used in RUT2 VXLAN interface settings.

#

#Enter the port number. The default port is 4789

# Enter the Remote address corresponding to RUT2 wired WAN interface  IP address

#Enter the Remote address corresponding to RUT2 wired WAN interface  IP address

# Click [[File:Save & Apply.png|90px]] twice

# Click [[File:Save & Apply.png|90px]] twice

[[File:Vxlan over wired vxlan rut1 settings.png|border|class=tlt-border]]

[[File:Vxlan over wired vxlan rut1 settings.png|border|class=tlt-border]]