Line 25: |
Line 25: |
| The syntax for a gsmctl command is ''gsmctl OPTIONS''. A list possible ''gsmctl'' options is provided below: | | The syntax for a gsmctl command is ''gsmctl OPTIONS''. A list possible ''gsmctl'' options is provided below: |
| | | |
− | -p, --ip <INTERFACE> Get IP of logical interface | + | -p, --ip <INTERFACE> Get IP of logical interface |
− | -e, --bsent <INTERFACE> Get number of bytes sent | + | -e, --bsent <INTERFACE> Get number of bytes sent |
− | -r, --brecv <INTERFACE> Get number of bytes recieved | + | -r, --brecv <INTERFACE> Get number of bytes recieved |
− | -j, --connstate Get 3G connection state | + | -j, --connstate Get 3G connection state |
− | -g, --netstate Get network link state | + | -g, --netstate Get network link state |
− | -i, --imei Get device IMEI | + | -i, --imei Get device IMEI |
− | -J, --iccid Get SIM ICCID | + | -J, --iccid Get SIM ICCID |
− | -m, --model Get device model | + | -m, --model Get device model |
− | -w, --manuf Get device manufacturer | + | -w, --manuf Get device manufacturer |
− | -a, --serial Get device serial number | + | -a, --serial Get device serial number |
− | -y, --revision Get device revision number | + | -y, --revision Get device revision number |
− | -x, --imsi Get IMSI | + | -x, --imsi Get IMSI |
− | -z, --simstate Get SIM card state | + | -z, --simstate Get SIM card state |
− | -u, --pinstate Get PIN state | + | -u, --pinstate Get PIN state |
− | -q, --signal Get GSM signal level | + | -q, --signal Get GSM signal level |
− | -X, --rscp Get WCDMA rscp level | + | -X, --rscp Get WCDMA rscp level |
− | -E, --ecio Get WCDMA ec/io level | + | -E, --ecio Get WCDMA ec/io level |
− | -W, --rsrp Get LTE rsrp level | + | -W, --rsrp Get LTE rsrp level |
− | -Z, --sinr Get LTE sinr level | + | -Z, --sinr Get LTE sinr level |
− | -M, --rsrq Get LTE rsrq level | + | -M, --rsrq Get LTE rsrq level |
− | -C, --cellid Get cell id parameter | + | -C, --cellid Get cell id parameter |
− | -o, --operator Get name of operator used | + | -o, --operator Get name of operator used |
− | -f, --opernum Get operator number | + | -f, --opernum Get operator number |
− | -t, --conntype Get data carrier type | + | -t, --conntype Get data carrier type |
− | -c, --temp Get module temperature in 0.1 degrees Celcius | + | -c, --temp Get module temperature in 0.1 degrees Celcius |
− | -B, --pincount Get pin/puk count | + | -B, --pincount Get pin/puk count |
− | -F --network Get network information | + | -F --network Get network information |
− | -K --serving Get serving cell information | + | -K --serving Get serving cell information |
− | -I --neighbour Get neighbour cell information | + | -I --neighbour Get neighbour cell information |
− | -D, --shutdown Shutdown the modem | + | -D, --shutdown Shutdown the modem |
− | -h, --help Prints this information | + | -h, --help Prints this information |
− | -v, --version Print version | + | -v, --version Print version |
| | | |
| sms managing options: | | sms managing options: |
Line 67: |
Line 67: |
| | | |
| compatibility options: | | compatibility options: |
− | -N, --he910 Support for Telit HE910-EUD | + | -N, --he910 Support for Telit HE910-EUD |
− | -R, --em820w Support for Huawei EM820W | + | -R, --em820w Support for Huawei EM820W |
− | -U, --me909u Support for Huawei LTE ME909u | + | -U, --me909u Support for Huawei LTE ME909u |
− | -V, --le910 Support for Telit LE910 | + | -V, --le910 Support for Telit LE910 |
| | | |
| auxiliary options: | | auxiliary options: |
− | -A, --at <COMMAND> Send AT command to device | + | -A, --at <COMMAND> Send AT command to device |
− | -H, --shell Enter shell mode | + | -H, --shell Enter shell mode |
− | -k, --debug Enable debug information | + | -k, --debug Enable debug information |
− | -n, --nolog Do not log the command | + | -n, --nolog Do not log the command |
| | | |
| You can view this list via terminal by typing ''gsmctl -h'' or ''gsmctl --help''. | | You can view this list via terminal by typing ''gsmctl -h'' or ''gsmctl --help''. |