Line 8: |
Line 8: |
| The command controls the behavior of the UE‟s DCD (data carrier detection) line. | | The command controls the behavior of the UE‟s DCD (data carrier detection) line. |
| | | |
− | [https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=32 '''3.2. AT&D Set DTR Function Mode - page 31'''] | + | [https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=33 '''3.2. AT&D Set DTR Function Mode - page 32'''] |
| | | |
| The commanddetermines how the UE responds if DTR line is changed from lowto highlevelduring data mode. | | The commanddetermines how the UE responds if DTR line is changed from lowto highlevelduring data mode. |
| | | |
− | [https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=33 '''3.3. AT+IFC Set TE-TA Local Data Flow Control - page 32'''] | + | [https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=34 '''3.3. AT+IFC Set TE-TA Local Data Flow Control - page 33'''] |
| | | |
| The command determines the flow control behavior of the serial port. | | The command determines the flow control behavior of the serial port. |
| | | |
− | [https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=34 '''3.4. AT+IFC Set TE-TA Local Data Flow Control - page 33'''] | + | [https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=35 '''3.4. AT+IFC Set TE-TA Local Data Flow Control - page 34'''] |
| | | |
| The command determines the serial interface character framing format and parity received by TA from TE. | | The command determines the serial interface character framing format and parity received by TA from TE. |
| | | |
− | [https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=35 '''3.5.AT+IPR Set TE-TA Fixed Local Rate - page 34'''] | + | [https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=36 '''3.5.AT+IPR Set TE-TA Fixed Local Rate - page 35'''] |
| | | |
| The commandis used to query and set the baud rate of the UART. The default baud rate value (<rate>) is 115200bps. The setting of <rate>will not be restored with AT&F. | | The commandis used to query and set the baud rate of the UART. The default baud rate value (<rate>) is 115200bps. The setting of <rate>will not be restored with AT&F. |
| | | |
− | [https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=36 '''3.6.AT+QRIR Restore RI Behaviorto Inactive - page 35'''] | + | [https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=37 '''3.6.AT+QRIR Restore RI Behaviorto Inactive - page 36'''] |
| | | |
| If the RI (ring indicator) behavior is "always",it can be restored to inactive by the Execution Command. The RI behavior is controlled by AT+QCFG. Please refer to AT+QCFG="urc/ri/ring", AT+QCFG="urc/ri/sms incoming"and AT+QCFG="urc/ri/other"for more details. | | If the RI (ring indicator) behavior is "always",it can be restored to inactive by the Execution Command. The RI behavior is controlled by AT+QCFG. Please refer to AT+QCFG="urc/ri/ring", AT+QCFG="urc/ri/sms incoming"and AT+QCFG="urc/ri/other"for more details. |