Line 70: |
Line 70: |
| AT+QICSGP=<contextID>[,<context_type>,<APN>[,<username>,<password>)[,<authentication>]]] | | AT+QICSGP=<contextID>[,<context_type>,<APN>[,<username>,<password>)[,<authentication>]]] |
| | | |
− | <context type> The protocol type (1 – IPV4; 2 – IPv6).
| + | ''<context type>'' The protocol type (1 – IPV4; 2 – IPv6). |
− | <context id> The range is 1-16.
| + | ''<context id>'' The range is 1-16. |
− | <authentication> The authentication methods (0 – NONE; 1 – PAP; 2 – CHAP; 3-PAP or CHAP)
| + | ''<authentication>'' The authentication methods (0 – NONE; 1 – PAP; 2 – CHAP; 3-PAP or CHAP) |
| | | |
| Example: use '''AT+QICSGP=1,1,"APN_Name","","",1''' | | Example: use '''AT+QICSGP=1,1,"APN_Name","","",1''' |
Line 114: |
Line 114: |
| ... | | ... |
| | | |
− | 1 –The context ID. The range is 1-16; | + | ''1'' –The context ID. The range is 1-16; |
| | | |
− | 8.8.8.8 - The host address in string type. | + | ''8.8.8.8'' - The host address in string type. |
| | | |
| '''Note:''' if ping a remote server successfully, response is '''OK''' (means that the module works properly). If there is any error, response is '''ERROR''' (means the problem is in the module). | | '''Note:''' if ping a remote server successfully, response is '''OK''' (means that the module works properly). If there is any error, response is '''ERROR''' (means the problem is in the module). |