But on the RUT955 improved housing design the terminator connections are missing. Since the RUT955 "facelift" model housing is not disassembled, the termination resistor must be connected to the outside of the device by connecting a through-hole 100 ohm resistor to the terminal contacts.
+
But on the [[RUT955 improved housing design/RUT955_Product_Change_Notifications#2019.01.22:_visual_design_changes]] the terminator connections are missing. Since the RUT955 "facelift" model housing is not disassembled, the termination resistor must be connected to the outside of the device by connecting a through-hole 100 ohm resistor to the terminal contacts.
The connection of the external resistor is shown in the figure:
The connection of the external resistor is shown in the figure: