Line 9: |
Line 9: |
| | | |
| | | |
− | fghfghfgh
| + | ==Prerequisites== |
| + | |
| + | For this particular configuration you will need: |
| + | |
| + | * A Router with 2xLTE modules (RUTX12 is being used in the example) |
| + | * 2 SIM cards |
| + | * 2 PCs in the same LAN network |
| + | |
| + | ==Preparation== |
| + | |
| + | * Prepare RUTX12, power up the device, insert two sim cards, check that both are active and working. SIM1, SIM2, PWR and signal strength indicators should light up. |
| + | * Access the router through WEBUI, go to Network -> Interfaces, make sure that both MOB1S1A1 and MOB2S1A1 interfaces are running (Status = Running). You should also be able to see their Ip addresses. |
| + | * Make sure that you have ADVANCED mode enabled. This will allow you to choose from a larger variety of settings. |
| + | |
| + | |
| + | '''Network -> Interfaces''' should look similar to this: |
| + | |
| + | [[File:Interfaces.png|center]] |