'''gsmctl''' command is specifically used to communicate with the modem module of the router, allowing to control and obtain information vis command line interface. The '''-A''' option means that the following will be an AT command. The “ '''AT+QCFG=“band”'''“ AT command is used for band configuration, in this case, setting specific bands. The meaning of the following numeric values:
+
'''gsmctl''' command is specifically used to communicate with the modem module of the router, allowing to control and obtain information via command line interface. The '''-A''' option means that the following will be an AT command. The “ '''AT+QCFG=“band”'''“ AT command is used for band configuration, in this case, setting specific bands. The meaning of the following numeric values:
*0 – no change for WCDMA band settings.
*0 – no change for WCDMA band settings.
*44 - 0x4(LTE Band 3)+0x40(LTE Band 7)) = 0x44 – specifies a dual LTE band locking for bands 3 and 7.
*44 - 0x4(LTE Band 3)+0x40(LTE Band 7)) = 0x44 – specifies a dual LTE band locking for bands 3 and 7.