Changes

847 bytes added , 17:00, 3 August 2023

no edit summary

Line 9: Line 9:

==Connection topology==

−

Connection topology in this case is simple, we are going to send Bluetooth data from either '''EYE sensor''' or '''EYE beacon''' using [[RUTX11_Data_to_Server|Data to server]] functionality.

+

Connection topology in this case is simple, we are going to send Bluetooth data from either '''EYE sensor''' or '''EYE beacon''' using [[RUTX11_Data_to_Server|Data to server]] functionality. More detailed topologies are presented in the configuration sections.

−

[[File:Bluetootheyesensorconfiguration topology v1.png|~~600px~~|border|class=tlt-border]]

+

[[File:Bluetootheyesensorconfiguration topology v1.png|800px|border|class=tlt-border]]

==Adjusting EYE device protocol and settings==

Line 41: Line 41:

==Bluetooth Data to Server via MQTT protocol==

−

In this section, we are going to upload Bluetooth data to server using MQTT Protocol. Prerequisites for this example:

+

In this section, we are going to upload Bluetooth data to server using MQTT Protocol. Here is the connection topology to help you understand things better:

+

[[File:Eyedevice mqttsection.png|border|800px|class=tlt-border]]

+

Prerequisites for this example:

*MQTT Broker

*MQTT Subscriber

Line 51: Line 55:

Follow these steps to configure Data to server functionality:

* Navigate to '''Services -> Data to server'''

−

* Press Add to add new data sender

+

* Press '''Add''' to add new data sender

[[File:Bluetootheyesensorconfiguration addnewsender v1.png|border|1000px|class=tlt-border]]

Line 72: Line 76:

===MQTT Subscriber setup and testing===

----

−

Follow these steps to subscribe on BT_data topic and get the Bluetooth data via MQTT:

+

Follow these steps to subscribe on the '''BT_data''' topic and get the Bluetooth data via MQTT:

* Navigate to your '''Mosquitto''' installation folder

* While holding '''Shift''' key, use '''Mouse right-click''' an press '''Open Powershell window here'''

Line 84: Line 88:

</pre>

−

Here '''-t''' option means topic and '''-h''' ~~identified~~ MQTT broker IP address.

+

Here '''-t''' option means topic and '''-h''' is used to set MQTT broker IP address.

If everything is set up correctly, you should be able to see incoming MQTT messages:

Line 92: Line 96:

==Bluetooth Data to Server using HTTP protocol==

−

In this section, we are going to upload Bluetooth data to server using HTTP Protocol. We are going to use a [https://www.hw-group.com/software/hercules-setup-utility Hercules] app as a TCP server to get Bluetooth sensor data from the device.

+

In this section, we are going to upload Bluetooth data to server using HTTP Protocol. Here is the connection topology to help you understand things better:

+

[[File:Eyedevices Httpserversection.png|border|800px|class=tlt-border]]

+

We are going to use a [https://www.hw-group.com/software/hercules-setup-utility Hercules] app as a TCP server to get Bluetooth sensor data from the device.

===Data sender setup===

Line 121: Line 129:

[[File:Bluetootheyesensorconfiguration herculesdata v1.png|border|600px|class=tlt-border]]

+

==Summary==

+

This configuration example demonstrates the process of pairing Teltonika Bluetooth Eye Sensors and Beacons with a RUTX11 router. The setup also includes testing the functionality of Bluetooth data transmission to a server using both HTTP and MQTT protocols. The example provides a step-by-step guide on how to connect the sensors and beacons to a router and effectively send data to a remote server for analysis and processing.

==References==

Line 135: Line 147:

[https://www.hw-group.com/software/hercules-setup-utility Hercules] - Hercules TCP Client / Server application

+

[[Category:Hardware application]]

PauliusRug

Administrators

569

edits

Changes

Teltonika EYE device pairing and data sender configuration example (view source)

Revision as of 17:00, 3 August 2023