Line 15: |
Line 15: |
| Follow these steps to set up the Modbus gateway: | | Follow these steps to set up the Modbus gateway: |
| | | |
− | * Navigate to '''Services -> Modbus -> Modbus TCP over Serial Gateway'''. | + | * Navigate to '''Services -> Modbus -> Modbus TCP over Serial Gateway''' |
− | * Input Configuration name. | + | * Input Configuration name |
− | * Select device: '''RS485/RS232/USB'''. | + | * Select device: '''RS485/RS232/USB''' |
− | * Press '''Add'''. | + | * Press '''Add''' |
| | | |
| [[File:Modbusupdategateway1.png|1000px|border|class=tlt-border]] | | [[File:Modbusupdategateway1.png|1000px|border|class=tlt-border]] |
| | | |
− | * In the configuration section, press '''Enable''' to enable the serial interface. | + | * In the configuration section, press '''Enable''' to enable the serial interface |
| * In the Serial '''Type''' section, select '''Modbus gateway'''. ////editable | | * In the Serial '''Type''' section, select '''Modbus gateway'''. ////editable |
− | You may need to change configuration depending on your needs, just make sure that identical settings are set here and in RTU simulator: Baud rate, data bits, parity, stop bits, flow control. | + | You may need to change configuration depending on your needs, just make sure that identical settings are set here and in RTU simulator: Baud rate, data bits, parity, stop bits, flow control |
| | | |
| [[File:Navigateandenable.png|border|class=tlt-border]] | | [[File:Navigateandenable.png|border|class=tlt-border]] |
Line 30: |
Line 30: |
| This will expand more customization options: | | This will expand more customization options: |
| | | |
− | * '''Listening IP''' – IP interface on which you are listening for incoming connections (input 0.0.0.0 to listen on any IP address). | + | * '''Listening IP''' – IP interface on which you are listening for incoming connections (input 0.0.0.0 to listen on any IP address) |
− | * '''Port''' – Port number for Modbus gateway (default port is 502). | + | * '''Port''' – Port number for Modbus gateway (default port is 502) |
− | * '''Slave ID''' configuration type – User defined or obtained from TCP. | + | * '''Slave ID''' configuration type – User defined or obtained from TCP |
− | * '''Slave ID''' – preconfigured Slave ID number. | + | * '''Slave ID''' – preconfigured Slave ID number |
| | | |
| [[File:Moreconfigurationoptions.png|border|class=tlt-border]] | | [[File:Moreconfigurationoptions.png|border|class=tlt-border]] |