| Line 1: |
Line 1: |
| − | The command delivers a product information text.
| + | == Serial Interface Control Commands == |
| | | | |
| − | [https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=13 '''2.1 ATI Display Product Identification Information - page 12'''] | + | ===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=33&zoom=100,68,232 AT&C Set DCD Function Mode]=== |
| | + | ---- |
| | + | The command controls the behavior of the UE‟s DCD (data carrier detection) line. |
| | | | |
| − | The command returns a manufacturer identification text. See also AT+CGMI.
| + | ===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=33&zoom=100,68,700 AT&D Set DTR Function Mode]=== |
| | + | ---- |
| | + | The commanddetermines how the UE responds if DTR line is changed from lowto highlevelduring data mode. |
| | | | |
| − | [https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=14 '''2.2 AT+GMI Request Manufacturer Identification - page 13''' ] | + | ===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=34&zoom=100,68,320 AT+IFC Set TE-TA Local Data Flow Control]=== |
| | + | ---- |
| | + | The command determines the flow control behavior of the serial port. |
| | | | |
| − | The command returns a product model identification text. It is identical with AT+CGMM.
| + | ===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=35&zoom=100,68,388 AT+IFC Set TE-TA Local Data Flow Control]=== |
| | + | ---- |
| | + | The command determines the serial interface character framing format and parity received by TA from TE. |
| | | | |
| − | [https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=14 '''2.3 AT+GMM Request TA Model Identification - page 13'''] | + | ===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=36&zoom=100,68,273 AT+IPR Set TE-TA Fixed Local Rate]=== |
| | + | ---- |
| | + | The commandis used to query and set the baud rate of the UART. The default baud rate value ('''<rate>''') is 115200bps. The setting of '''<rate>''' will not be restored with '''AT&F'''. |
| | | | |
| − | The command delivers a product firmware version identification text. It is identical with AT+CGMR.
| + | ===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=37&zoom=100,68,729 AT+QRIR Restore RI Behaviorto Inactive]=== |
| − | | + | ---- |
| − | [https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=15 '''2.4 AT+GMR Request TA Revision Identification of Software Release - page 14''']
| + | If the RI (ring indicator) behavior is "always",it can be restored to inactive by the Execution Command. The RI behavior is controlled by '''AT+QCFG'''. Please refer to '''AT+QCFG="urc/ri/ring'''", '''AT+QCFG="urc/ri/sms incoming'''"and '''AT+QCFG="urc/ri/other'''"for more details. |
| − | | |
| − | The command returns a manufacturer identification text. See also AT+GMI.
| |
| − | | |
| − | [https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=15 '''2.5 AT+CGMI Request Manufacturer Identification - page 14'''] | |
| − | | |
| − | The command returns a product model identification text. It is identical with AT+GMM.
| |
| − | | |
| − | [https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=16 '''2.6 AT+CGMM Request Model Identification - page 15''']
| |
| − | | |
| − | The command delivers a product firmware version identification text. It is identical with AT+GMR.
| |
| − | | |
| − | [https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=16 '''2.7 AT+CGMR Request TA Revision Identification of Software Release - page 15''']
| |
| − | | |
| − | The command returns the International Mobile Equipment Identity (IMEI) number of ME. It is identical with
| |
| − | AT+CGSN.
| |
| − | | |
| − | [https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=17 '''2.8 AT+GSN Request International Mobile Equipment Identity (IMEI) - page 16''']
| |
| − | | |
| − | The command returns International Mobile Equipment Identity (IMEI) number of ME. It is identical with
| |
| − | AT+GSN.
| |
| − | | |
| − | [https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=18 '''2.9 AT+CGSN Request Product Serial Number Identification - page 17''']
| |
| − | | |
| − | The command resets AT command settings to their factory default values.
| |
| − | | |
| − | [https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=18 '''2.10. AT&F Set all Current Parameters to Manufacturer Defaults - page 17''']
| |
| − | | |
| − | The command displays the current settings of several AT command parameters, including the single-letter
| |
| − | AT command parameters which are not readable otherwise.
| |
| − | | |
| − | [https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=19 '''2.11 AT&V Display Current Configuration - page 18''']
| |
| − | | |
| − | The command stores the current AT command settings to a user defined profile in non-volatile memory.
| |
| − | | |
| − | [https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=20 '''2.12 AT&W Store Current Parameters to User Defined Profile - page 19''']
| |
| − | | |
| − | The command restores the current AT command settings to the user defined profile in non-volatile
| |
| − | memory, if one was stored with AT&W before. Any additional AT command on the same command line
| |
| − | may be ignored.
| |
| − | | |
| − | [https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=20 '''2.13 ATZ Set all Current Parameters to User Defined Profile - page 19''']
| |
| − | | |
| − | The command controls whether the result code is transmitted to the TE. Other information text transmitted
| |
| − | as response is not affected.
| |
| − | | |
| − | [https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=21 '''2.14 ATQ Set Result Code Presentation Mode - page 20''']
| |
| − | | |
| − | The command determines the contents of header and trailer transmitted with AT command result codes
| |
| − | and information responses.
| |
| − | | |
| − | The result codes, their numeric equivalents and brief descriptions of the use of each are listed in the
| |
| − | following table.
| |
| − | | |
| − | [https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=21 '''2.15 ATV TA Response Format - page 20''']
| |
| − | | |
| − | The command controls whether or not the module echoes characters received from TE during AT
| |
| − | command mode.
| |
| − | | |
| − | [https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=23 '''2.16 ATE Set Command Echo Mode - page 22''']
| |
| − | | |
| − | The command repeats previous AT command line, and “/” acts as the line terminating character.
| |
| − | | |
| − | [https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=23 '''2.17 A/ Repeat Previous Command Line - page 22''']
| |
| − | | |
| − | The command determines the character recognized by the module to terminate an incoming command
| |
| − | line. It is also generated for result codes and information text, along with character value set via ATS4
| |
| − | | |
| − | [https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=24 '''2.18 ATS3 Set Command Line Termination Character - page 23''']
| |
| − | | |
| − | The command determines the character generated by the module for result code and information text,
| |
| − | along with the command line termination character set via ATS3.
| |
| − | | |
| − | [https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=25 '''2.19 ATS4 Set Response Formatting Character - page 24''']
| |
| − | | |
| − | The command determines the character value used by the module to delete the immediately preceding
| |
| − | character from the AT command line (i.e. equates to backspace key).
| |
| − | | |
| − | [https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=25 '''2.20 ATS5 Set Command Line Editing Character - page 24''']
| |
| − | | |
| − | The command determines whether or not the module transmits particular result codes to the TE. It also
| |
| − | controls whether or not the module verifies the presence of a dial tone when it begins dialing, and whether
| |
| − | or not engaged tone (busy signal) detection is enabled.
| |
| − | | |
| − | [https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=26 '''2.21 ATX Set CONNECT Result Code Format and Monitor Call Progress - page 25''']
| |
| − | | |
| − | The command controls the functionality level. It can also be used to reset the UE.
| |
| − | | |
| − | [https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=27 '''2.22 AT+CFUN Set Phone Functionality - page 26''']
| |
| − | | |
| − | The command controls the format of error result codes: ERROR, error numbers or verbose messages as
| |
| − | +CME ERROR: <err> and +CMS ERROR: <err>.
| |
| − | | |
| − | [https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=28 '''2.23 AT+CMEE Error Message Format - page 27''']
| |
| − | | |
| − | The Write Command informs the module which character set is used by the TE. This enables the UE to
| |
| − | convert character strings correctly between TE and UE character sets.
| |
| − | | |
| − | [https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=29 '''2.24 AT+CSCS Select TE Character Set - page 28''']
| |
| − | | |
| − | The command is used to configure the output port of URC.
| |
| − | | |
| − | [https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=30 '''2.25 AT+QURCCFG Configure URC Indication Option - page 29''']
| |
| | | | |
| | [[Category:TRM240 AT Commands]] | | [[Category:TRM240 AT Commands]] |
