The <b>Fast Roaming</b> tab is only available when in <b>General</b> section <b>Client</b> mode is seclected and in <b>.
+
The <b>Fast Roaming</b> tab is only available when in <b>General</b> section <b>Client</b> mode is seclected and in <b>Advanced settings</b> tab <b>Enable fast roaming</b> option is enabled.
+
+
[[File:Networking rutos manual wireless interface configuration fast roaming settings.pngborder|class=tlt-border]]
<td>Defines how the MAC Filter should function.<br>
+
<ul>
+
<li><b>Simple:</b> Periodic background scans based on signal strengt</li>
+
<li><b>Learn:</b> Learns channels used by the network and tries to avoid scans on other channels</li>
+
</ul>
+
</td>
+
</tr>
+
<tr>
+
<td>Short interval</td>
+
<td>integer [5..86400]; default: <b>30</b></td>
+
<td>Defines the interval between background scans (in seconds) if the actual signal level of the currently connected access point is worse than signal threshold </td>
+
</tr>
+
<tr>
+
<td>Long interval</td>
+
<td>integer [5..86400]; default: <b>300</b></td>
+
<td>Defines the interval between background scans (in seconds) if the actual signal level of the currently connected access point is better than signal threshold</td>
+
</tr>
+
<tr>
+
<td>Signal threshold</td>
+
<td>integer [-90..-30]; default: <b>-70</b></td>
+
<td>Defines a threshold (in dBm) that determines if short interval or longer interval will be used</td>