Changes

146 bytes added , Yesterday at 13:07

no edit summary

Line 112: Line 112:

| TRB141 = '''Note:''' When dry/wet input is not connected to anything - the state of level is undetermined.

| #default =}}

−

{{#switch: {{{name}}}

+

{{#switch: {{{name}}}|RUT955|RUT956|RUT906|TRB245|TRB246|TRB255|TRB141|TRB256 =

−

| RUT955|RUT956|RUT906|TRB245|TRB246|TRB255|TRB141|TRB256 =

'''Note:''' You can edit the adc/acl formula to customize values.

Line 121: Line 120:

Custom I/O status labels for "Analog current loop":

[[File:Networking_manual_input_output_status_formula_acl0.png|border|class=tlt-border]]

−

| #default =

+

| #default =}}

−

}}

===Status from command line===

Line 198: Line 196:

<tr>

<td>Turn Output state to high</td>

−

<td><nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}.1/cgi-bin/io_state<nowiki>?username=user1&password=user1&pin=</nowiki>{{#ifeq:{{{series}}}|RUTX|dout1|<dio0/dio1{{#switch:{{{series}}}|TRB2|TRB2M=/dio2}}>}}<nowiki>&state=on</nowiki></td>

+

<td><nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}.1/cgi-bin/io_state<nowiki>?username=user1&password=user1&pin=</nowiki>{{#ifeq:{{{series}}}|RUTX|dout1|<dio0/dio1{{#switch:{{{series}}}|TRB2|TRB2M=/dio2}}>}}<nowiki>&state=on</nowiki></td>

</tr>

<tr>

<td>Turn Output state to low after 5 seconds for 3 seconds</td>

−

<td><nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}.1/cgi-bin/io_state<nowiki>?username=user1&password=user1&pin=</nowiki>{{#ifeq:{{{series}}}|RUTX|dout1|<dio0/dio1{{#switch:{{{series}}}|TRB2|TRB2M=/dio2}}>}}&state=on<nowiki>&delay=5</nowiki><nowiki>&time=3</nowiki></td>

+

<td><nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}.1/cgi-bin/io_state<nowiki>?username=user1&password=user1&pin=</nowiki>{{#ifeq:{{{series}}}|RUTX|dout1|<dio0/dio1{{#switch:{{{series}}}|TRB2|TRB2M=/dio2}}>}}&state=on<nowiki>&delay=5</nowiki><nowiki>&time=3</nowiki></td>

</tr>

<tr>

<td>Check t_time parameter - time is set in miliseconds</td>

−

<td><nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}.1/cgi-bin/io_state<nowiki>?username=user1&password=user1&pin=</nowiki>{{#ifeq:{{{series}}}|RUTX|dout1|<dio0/dio1{{#switch:{{{series}}}|TRB2|TRB2M=/dio2}}>}}&state=on<nowiki>&t_time=msec</nowiki><nowiki>&time=5000</nowiki><nowiki>&time=1000</nowiki></td>

+

<td><nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}.1/cgi-bin/io_state<nowiki>?username=user1&password=user1&pin=</nowiki>{{#ifeq:{{{series}}}|RUTX|dout1|<dio0/dio1{{#switch:{{{series}}}|TRB2|TRB2M=/dio2}}>}}&state=on<nowiki>&t_time=msec</nowiki><nowiki>&time=5000</nowiki><nowiki>&time=1000</nowiki></td>

</tr>

<tr>

<td>Invert input</td>

−

<td><nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}.1/cgi-bin/io_invert?username=user1&password=user1&pin={{#ifeq:{{{series}}}|RUTX|din1|<dio0/dio1{{#switch:{{{series}}}|TRB2|TRB2M=/dio2}}>}}<nowiki>&invert=<0/1> (0 - disable inversion/1 - enable inversion</nowiki></td>

+

<td><nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}.1/cgi-bin/io_invert?username=user1&password=user1&pin={{#ifeq:{{{series}}}|RUTX|din1|<dio0/dio1{{#switch:{{{series}}}|TRB2|TRB2M=/dio2}}>}}<nowiki>&invert=<0/1> (0 - disable inversion/1 - enable inversion</nowiki></td>

</tr>

{{#ifeq:{{{configurableio}}}|1|

<tr>

<td>Change Configurable Input/Output with pin3 to Output</td>

−

<td><nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}.1/cgi-bin/io_type<nowiki>?username=user1&password=user1&</nowiki>pin=dio0<nowiki>&type=out</nowiki></td>

+

<td><nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}.1/cgi-bin/io_type<nowiki>?username=user1&password=user1&</nowiki>pin=dio0<nowiki>&type=out</nowiki></td>

</tr>

||}}

Line 223: Line 221:

Overview:

<ul>

−

<li>192.168.{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}.1 - device default LAN IP address; replace it in accordance with your own configuration.</li>

+

<li>192.168.{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}.1 - device default LAN IP address; replace it in accordance with your own configuration.</li>

{{#ifeq:{{{configurableio}}}|1|<li>io_state,io_type or io_invert- allows you to change IO state, type or invert cofigurable input.</li>}}

<li>username - login name from Post/Get configuration.</li>

Line 241: Line 239:

* Switch output to High:

−

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_state?username=user1&password=user1&pin=dout1&state=on</nowiki>"

+

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}<nowiki>.1/cgi-bin/io_state?username=user1&password=user1&pin=dout1&state=on</nowiki>"

* Switch output to Low after delay:

−

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_state?username=user1&password=user1&pin=dout1&state=off&delay=5</nowiki>"

+

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}<nowiki>.1/cgi-bin/io_state?username=user1&password=user1&pin=dout1&state=off&delay=5</nowiki>"

====Reading====

Line 252: Line 250:

{{#ifeq:{{{configurableio}}}|1|* {{#switch:{{{name}}}|TRB245|TRB246|TRB255|TRB256 = Read state of Configurable Input/Output PIN2/PIN3/PIN4:

−

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dio0</nowiki>"

+

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dio0</nowiki>"

−

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dio1</nowiki>"

+

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dio1</nowiki>"

−

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dio2</nowiki>" | #default = Read state of Configurable Input/Output PIN3/PIN4:

+

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dio2</nowiki>" | #default = Read state of Configurable Input/Output PIN3/PIN4:

−

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dio0</nowiki>"

+

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dio0</nowiki>"

−

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dio1</nowiki>"}}|

+

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dio1</nowiki>"}}|

* Read state of digital input/output:

−

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=din1</nowiki>"

+

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=din1</nowiki>"

−

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dout1</nowiki>"}}

+

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dout1</nowiki>"}}

{{#ifeq:{{{analog}}}|1|* Read state of analog input (in voltage mode):

−

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=adc0</nowiki>"|}}

+

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=adc0</nowiki>"|}}

{{#ifeq:{{{acl}}}|1|* Read state of analog input (in current mode):

−

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=acl0</nowiki>"|}}

+

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=acl0</nowiki>"|}}

{{#ifeq:{{{dry}}}|1|* Read state of Dry input PIN1:

−

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dwi0</nowiki>"|}}

+

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dwi0</nowiki>"|}}

{{#ifeq:{{{wet}}}|1|* Read state of Wet input PIN2:

−

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dwi1</nowiki>"|}}

+

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dwi1</nowiki>"|}}

{{#ifeq:{{{isolated}}}|1|* Read state of Isolated input:

−

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=iio</nowiki>"|}}

+

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=iio</nowiki>"|}}

{{#ifeq:{{{onewire}}}|1|* Read state of One Wire:

−

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=onewire</nowiki>"|}}

+

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=onewire</nowiki>"|}}

{{#ifeq:{{{relay}}}|1|* Read state of Relay:

−

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=relay0</nowiki>"|}}

+

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=relay0</nowiki>"|}}

{{#ifeq:{{{latchingrelay}}}|1|* Read state of Latching Relay:

−

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=relay1</nowiki>"|}}

+

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=relay1</nowiki>"|}}

{{#ifeq:{{{galvanic}}}|1|* Read state of Galvanically isolated open collector output:

−

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dout2</nowiki>"|}}

+

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dout2</nowiki>"|}}

{{#ifeq:{{{digitalpassive}}}|1|* Read state of Digital input (only for passive sensors):

−

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=din2</nowiki>"|}}

+

curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=din2</nowiki>"|}}

==Scheduler==

Line 308: Line 306:

<tr>

−

<td>output pin; default: {{#ifeq:{{{configurableio}}}|1|Configurable Input/Output (2)|Output (4)}}</td>

+

<td>output pin; default: {{#ifeq:{{{configurableio}}}|1|Configurable Input/Output (3)|Output (4)}}</td>

<td>Output pin. The state of the selected output will be set to "High" during the time interval defined in the fields below.</td>

</tr>

Line 518: Line 516:

<tr>

<td>Control</td>

−

<td>output; default: {{#ifeq:{{{configurableio}}}|1|Configurable Input/Output (2)|Output (4)}}</td>

+

<td>output; default: {{#ifeq:{{{configurableio}}}|1|Configurable Input/Output (3)|Output (4)}}</td>

<td>Selects the output controlled by this Action.</td>

</tr>

Line 940: Line 938:

<tr>

−

<td>inputs/outputs; default: Output(4)</td>

+

<td>inputs/outputs; default: Output(3)</td>

<td>Specifies the I/O pin to which this Condition is listening to.</td>

</tr>

Vainius.l

Administrators

9,293

edits

Namespaces

Variants

Views

More

Search

Changes

Template:Networking rutos manual input output (view source)

Revision as of 13:07, 4 September 2024

Navigation menu

Personal tools

NAVIGATION

Tools

Categories