234
edits
Changes
→Creating New Routing Policy Rule
====Physical Port 1 Test Result====
====Physical Port 1 Test Result====
----
----
[[File:Test1.png|border|class=tlt-border|center]]
====Physical Port 2 Test Result====
====Physical Port 2 Test Result====
----
----
[[File:Test22.png|border|class=tlt-border|center]]
====Physical Port 3 Test Result====
====Physical Port 3 Test Result====
----
----
[[File:Test33.png|border|class=tlt-border|center]]
===Policy Based Routing on a single Host===
===Policy Based Routing on a single Host===
----
----
====Single Host Routing Topology====
====Single Host Routing Topology====
[[File:PBR222.png|border|class=tlt-border|center]]
[[File:PBR222.png|border|class=tlt-border|center|1000x800px]]
----
----
====Wired WAN Routing Policy priority change====
====Wired WAN Routing Policy Priority Change====
----
'''Open WebUI → Network → Routing → Policy based routing → Routing Rules for IPv4''' and click [[File:Pencil2.png]] on '''Policy Rule 2'''
----
----
Make following changes:
# Set Priority: '''2'''
[[File:PBRSN.png|border|class=tlt-border|center|]]
====Creating New Routing Policy Rule====
====Creating New Routing Policy Rule====
----
----
Open '''WebUI → Network → Routing → Policy based routing'''
=====Creating Single Node Routing Table Over WifiWan=====
Add new instance:
# Enter ID: '''7'''
# Enter New configuration name: '''Node'''
[[File:Node 1 Table.png|border|class=tlt-border|center]]
click [[File:Add Button.png|40x70px]] in the new window make following changes:
=====Static IPv4 Routes=====
----
click [[File:Add Button.png|40x70px]] and aplly this to the route:
#Select Interface: '''WifiWan''' | Enter Target: '''0.0.0.0''' | Enter IPv4-Netmask: '''0.0.0.0''' | Enter IPv4-Gateway: '''192.168.1.1'''
[[File:PBR_P_ROUTE_111.png|border|class=tlt-border|center|1000x300px]]
====Routing Rules for IPv4====
----
By clicking [[File:Add Button.png|40x70px]] create rule under '''Routing Rules for IPv4''' tab apply these changes to the rules:
======Policy Rule 4======
----
# Enter Priority: '''1'''
# Select Incoming interface: '''LAN_VLAN_3'''
# Select Outgoing interface: '''None'''
# Enter Source subnet: '''192.168.3.246/32'''
# Select Matched Traffic Action: '''Lookup Table'''
# Lookup Table: '''Node (7)'''
[[File:PR4.png|border|class=tlt-border|center|1000x800px]]
====Testing the Policy Route====
====Testing the Policy Route====
----
----
[[File:POLICY_ROUTE.png|border|class=tlt-border|center]]
