Changes

VLAN: Tag-Based RUTOS new (view source)

Revision as of 09:41, 7 August 2024

487 bytes added ,  7 August
→‎Testing VLAN Configuration
Line 80: Line 80:     
===Testing VLAN Configuration===
 
===Testing VLAN Configuration===
 +
----
 +
'''To further test if the changes were successful.'''
    +
Change your wired connection from your PC to your device LAN 3 port.
    +
====PC Network Settings====
 +
----
 +
====How to Assign Tagged Vlan To Your PC====
 +
----
 +
Open network settings on your PC '''Ethernet''' interface:
    +
1. Open network Ethernet interface '''"Properties"''' on your PC.
   −
'''To further test if the changes were successful.'''
+
2. Click '''"Configure"''' inside '''"Ethernet Properties"''' tab.
    +
3. Select '''"Advanced"''' tab in the new window.
    +
4. Set '''"VLAN ID"''' to values that were assigned to LAN3 port in the VLAN configuration '''(WebUI -> Network -> VLAN -> Port Based -> Poer based VLAN -> (VLAN ID | LAN 3))''' in this case values are '''"1"'' and '''"3"'''. Depending on the vlaue your network device will be assigned to different LAN network.
   −
[https://www.realtek.com/en/directly-download?downloadid=627bfc4037f338432811cfa48b5a5724 Realtek Ethernet Diagnostic Tool]
+
5. After setting VLAN ID always execute command in your PC command line: '''ipconfig/renew'''
      −
Change your wired connection from your PC to Ethernet Port 3 on the Router.
  −
  −
Open the Realtek Ethernet Diagnostic Utility application on your pc.  Click on "Realtek PCIe Gbe Family Controller"
      
[[File:Networking_rut_manual_vlan_tagged_based_device_settings_realtek_setting_v1.png|border|class=tlt-border]]
 
[[File:Networking_rut_manual_vlan_tagged_based_device_settings_realtek_setting_v1.png|border|class=tlt-border]]
Retrieved from "https://wiki.teltonika-networks.com/view/Special:MobileDiff/130176"

Navigation menu