Changes

Hardware Related Commands TRM250 (view source)

Revision as of 13:02, 20 August 2024

589 bytes removed ,  20 August
no edit summary
Line 17: Line 17:  
The command is used to read the voltage value of ADC channel.
 
The command is used to read the voltage value of ADC channel.
   −
===[https://wiki.teltonika-networks.com/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=194&zoom=100,68,181 AT+QSCLK Enable/Disable Entering into Sleep Mode] ===
  −
----
  −
The command is used to control whether the module enters into sleep mode. When entering into sleep mode is enabled, DTR is pulled up and WAKEUP_IN is pulled up, the module can directly enter into sleep mode. If entering into sleep mode is enabled, DTR is pulled down and WAKEUP_IN is pulled down, there is a need to pull the DTR pin and the WAKEUP_IN pin up first, and then the module can enter into sleep mode.
      
===[https://wiki.teltonika-networks.com/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=194&zoom=100,68,842 AT+QTEMP Read Temperature] ===
 
===[https://wiki.teltonika-networks.com/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=194&zoom=100,68,842 AT+QTEMP Read Temperature] ===
Retrieved from "https://wiki.teltonika-networks.com/view/Special:MobileDiff/130924"

Navigation menu