Changes

#<li value="9">Choose Data type and Function, enter First register/coil/input to be read or written and Register count. You can name each individual configuration, and then select enable on configurations that you want to use. In this example, register to get Routers name is used.

#<li value="9">Choose Data type and Function, enter First register/coil/input to be read or written and Register count. You can name each individual configuration, and then select enable on configurations that you want to use. In this example, register to get Routers name is used.

#Press the Test button in Request Configuration Testing to see if the Slave device responds to requests, a response similar to the image below should be shown.

#Press the Test button in Request Configuration Testing to see if the Slave device responds to requests, a response similar to the image below should be shown.

[[File:MQTT gateway modbus client configuration v3.png|alt=|border|class=tlt-border|1100px]]

[[File:MQTT gateway modbus client configuration v3.png|border|class=tlt-border|1100px]]

[[File:MQTT gateway modbus client configuration v4.png|thumb]]

[[File:MQTT gateway modbus client configuration v4.png|border|class=tlt-border|1100px]]

#Press Save & Apply

#Press Save & Apply

''List of available Modbus parameters can be found [https://wiki.teltonika-networks.com/view/{{{name}}}_Monitoring_via_Modbus#Get_Parameters here]''

''List of available Modbus parameters can be found [https://wiki.teltonika-networks.com/view/{{{name}}}_Monitoring_via_Modbus#Get_Parameters here]''