Changes

#<li value="8">Enter new request name and press [[File:Add Button.png|50px]] in Requests configurations

#<li value="8">Enter new request name and press [[File:Add Button.png|50px]] in Requests configurations

[[File:MQTT gateway modbus client configuration v2.png|border|class=tlt-border|1100px]]

[[File:MQTT gateway modbus client configuration v2.png|border|class=tlt-border|1100px]]

#<li value="9">Choose Data type and Function, enter First register/coil/input to be read or written and Register count. You can name each individual configuration, and then select enable on configurations that you want to use. In this example, register to get Routers name is used.

#<li value="9">Choose "Data type" - '''ASCII''', "Function" - '''Read holding resgiter (3)''', enter "First register number" - '''72''' and "Register count/Values" - '''3''' You can name each individual configuration, and then select enable on configurations that you want to use. In this example, register to get Routers name is used.

#Press the Test button in Request Configuration Testing to see if the Slave device responds to requests, a response similar to the image below should be shown.

#Press the Test button in Request Configuration Testing to see if the Slave device responds to requests, a response similar to the image below should be shown.

[[File:MQTT gateway modbus client configuration v3.png|border|class=tlt-border|1100px]]

[[File:MQTT gateway modbus client configuration v3.png|border|class=tlt-border|1100px]]