Changes

[[File:MQTT gateway modbus client configuration v2.png|border|class=tlt-border|1100px]]

[[File:MQTT gateway modbus client configuration v2.png|border|class=tlt-border|1100px]]

#<li value="9">Choose "Data type" - '''ASCII''', "Function" - '''Read holding resgiter (3)''', enter "First register number" - '''72''' and "Register count/Values" - '''3''' You can name each individual configuration, and then select enable on configurations that you want to use. In this example, register to get Routers name is used.

#<li value="9">Choose "Data type" - '''ASCII''', "Function" - '''Read holding resgiter (3)''', enter "First register number" - '''72''' and "Register count/Values" - '''3''' You can name each individual configuration, and then select enable on configurations that you want to use. In this example, register to get Routers name is used.

#Press the "'''Test'''" button in Request Configuration Testing to see if the Slave device responds to requests, a response similar to the image below should be shown.

#Press the "'''Test'''" button in Request Configuration Testing to see if the Server device responds to requests, a response similar to the image below should be shown.

[[File:MQTT gateway modbus client configuration v3.png|border|class=tlt-border|1100px]]

[[File:MQTT gateway modbus client configuration v3.png|border|class=tlt-border|1100px]]

[[File:MQTT gateway modbus client configuration v4.png|border|class=tlt-border|1100px]]

[[File:MQTT gateway modbus client configuration v4.png|border|class=tlt-border|1100px]]

|from '''1''' to '''999'''

|from '''1''' to '''999'''

|-

|-

|7. Slave ID - Indicates to which slave request is sent

|7. Server ID - Indicates to which Server request is sent

|from '''1''' to '''255'''

|from '''1''' to '''255'''

|-

|-