2,658
edits
Changes
Template:Networking device manual device recovery bootloader (view source)
Revision as of 16:41, 6 September 2024
, Yesterday at 16:41no edit summary
<li>While holding the reset button, plug the power cable into the {{#switch: {{{series}}}| TRB2xx|TRB2M = gateway | TSW2 = switch | TAP100 | TAP200 = AP | #default = router}}. Continue holding the button for another 5 seconds.</li>
<li>While holding the reset button, plug the power cable into the {{#switch: {{{series}}}| TRB2xx|TRB2M = gateway | TSW2 = switch | TAP100 | TAP200 = AP | #default = router}}. Continue holding the button for another 5 seconds.</li>
<li>Release the reset button.</li>
<li>Release the reset button.</li>
<li>he LEDs will begin to blink rapidly, indicating that the device has entered bootloader mode.</li>
<li>The LEDs will begin to blink rapidly, indicating that the device has entered bootloader mode.</li>
</ul>
</ul>
|<ul>
|<ul>
<li>While holding the reset button, plug the power cable into the {{#switch: {{{series}}}| TRB2xx|TRB2M = gateway | TSW2 = switch | TAP100 | TAP200 = AP | #default = router}}. Continue holding the button for another 5 seconds.</li>
<li>While holding the reset button, plug the power cable into the {{#switch: {{{series}}}| TRB2xx|TRB2M = gateway | TSW2 = switch | TAP100 | TAP200 = AP | #default = router}}. Continue holding the button for another 5 seconds.</li>
<li>Release the reset button.</li>
<li>Release the reset button.</li>
<li>he LEDs will begin to blink rapidly, indicating that the device has entered bootloader mode.</li>
<li>The LEDs will begin to blink rapidly, indicating that the device has entered bootloader mode.</li>
</ul>}}
</ul>}}
