40
edits
Changes
Draft:802.11r WiFi roaming configuration example (view source)
Revision as of 04:58, 26 September 2024
, Yesterday at 04:58no edit summary
__TOC__
==Introduction==
==Introduction==
This article provides a basic configuration example of WiFi roaming.
This article provides a basic configuration example of WiFi roaming.
==Firmwware==
<p style="color:red">The information in this page is updated in accordance with [https://wiki.teltonika-networks.com/view/FW_%26_SDK_Downloads'''00.07.09'''] firmware version. .</p>
==Prerequisites==
==Prerequisites==
* Main gateway with WAN access (Any RUTOS router. RUTX50 is used in this example)
* Main gateway with WAN access (Any RUTOS router. RUTX50 is used in this example)
* Access Points (Any WiFi-capable RUTOS device. RUTX11 (Router 1) and RUTX50 (Router 2) are used in this example)
* Access Points (Any WiFi-capable RUTOS device. RUTX11 (Router 1) and RUTX50 (Router 2) are used in this example)
Before you start configuring the router <b>turn on "Advanced WebUI" mode</b>. You can do that by clicking the "Basic" button under "Mode", which is located at the top-right corner of the WebUI.
Before you start configuring the router <b>turn on "Advanced WebUI" mode</b>. You can do that by clicking the "Basic" button under "Mode", which is located at the top-right corner of the WebUI.
[[File:Networking_rutx_manual_webui_basic_advanced_mode_v1.gif|border|class=tlt-border]]
[[File:Networking_rutx_manual_webui_basic_advanced_mode_v1.gif|border|class=tlt-border]]
==Configuration==
