40
edits
Changes
Draft:802.11r WiFi roaming configuration example (view source)
Revision as of 05:56, 26 September 2024
, Yesterday at 05:56no edit summary
==Introduction==
==Introduction==
This article provides a basic configuration example of WiFi roaming.
This article provides a basic configuration example of 802.11r WiFi roaming.
==Firmwware==
==Firmwware==
==Prerequisites==
==Prerequisites==
* Main gateway with WAN access (Any RUTOS router. RUTX50 is used in this example)
* Main gateway with WAN access (Any RUTOS router. RUTX50 is used in this example)
* Access Points (Any WiFi-capable RUTOS device. RUTX11 (Router 1) and RUTX50 (Router 2) are used in this example)
* Access Points (Any WiFi-capable RUTOS device. RUTX11 (Router 1) and RUTX11 (Router 2) are used in this example)
Before you start configuring the router <b>turn on "Advanced WebUI" mode</b>. You can do that by clicking the "Basic" button under "Mode", which is located at the top-right corner of the WebUI.
Before you start configuring the router <b>turn on "Advanced WebUI" mode</b>. You can do that by clicking the "Basic" button under "Mode", which is located at the top-right corner of the WebUI.
==Configuration==
==Configuration==
[[File:Networking rutos configuration examples wifi roaming configuration scheme v2.png|border|class=tlt-border]]
===Gateway router===
----
# Login to the router's WebUI, navigate to the '''Network → Interfaces → Edit LAN''' page. Enter main gateway's IP address and save. We will leave it default (192.168.1.1) for this example.
<ol>
<li>Connect your AP/WiFi router to the gateway router using LAN to LAN connection.</li>
<li>Login to the router's WebUI, navigate to the '''Network → Interfaces → Edit LAN''' page. Configure as follows:</li>
<ol>
<li>Enter IP address on the same subnet as main gateway. We will use 192.168.1.2 for Router 1 and 192.168.1.3 for Router 2 in this example.</li>
<li>Enter <b>IPv4 gateway</b>. We will use our gateway router's IP - 192.168.1.1.</li>
<li>Disable <b>DHCP server</b>.</li>
</ol>
</ol>
