Changes

==Prerequisites==

==Prerequisites==

* Main gateway with WAN access (Any RUTOS router. RUTX50 is used in this example)

* Main gateway with WAN access (Any RUTOS router. RUTX50 is used in this example)

* Access Points (Any WiFi-capable RUTOS device. RUTX11 (Router 1) and RUTX11 (Router 2) are used in this example)

* Access Points (Any WiFi-capable RUTOS device. RUTX11 ('''Router 2''') and RUTX11 ('''Router 3''') are used in this example)

Before you start configuring the router <b>turn on "Advanced WebUI" mode</b>. You can do that by clicking the "Basic" button under "Mode", which is located at the top-right corner of the WebUI.

Before you start configuring the router <b>turn on "Advanced WebUI" mode</b>. You can do that by clicking the "Basic" button under "Mode", which is located at the top-right corner of the WebUI.

Key (PMK) can be synchronized)</li>

Key (PMK) can be synchronized)</li>

</ol>

</ol>

* Note: 802.11v and 802.11k can be enabled in '''Network → Wireless → SSIDs → Edit SSID → Additional setting''', which can improve performance of Fast transit. Please see the reference: [https://wiki.teltonika-networks.com/view/802.11k/v_wireless_roaming_configuration_guide'''802.11k/v wireless roaming configuration guide'''];

* Note: 802.11v and 802.11k can be enabled in '''Network → Wireless → SSIDs → Edit SSID → Additional setting''', which can improve performance of Fast transit. Please see the reference: [https://wiki.teltonika-networks.com/view/802.11k/v_wireless_roaming_configuration_guide'''802.11k/v wireless roaming configuration guide''']

[[File:Networking rutx50 webui wireless ssid 802.11r FT configuration v1.png|950px|center|border|class=tlt-border]]

[[File:Networking rutx50 webui wireless ssid 802.11r FT configuration v1.png|950px|center|border|class=tlt-border]]