Changes

The <b>Modem</b> serial type is used to manage modem functionality which could be accessed using shell interface. For this purpose you may want use CR/LF (Carriage Return, Line Feed) capable applications like PuTTY on Windows and microcom, minicom, cutecom or similar applications on Linux.

The <b>Modem</b> serial type is used to manage modem functionality which could be accessed using shell interface. For this purpose you may want use CR/LF (Carriage Return, Line Feed) capable applications like PuTTY on Windows and microcom, minicom, cutecom or similar applications on Linux.

{{#ifeq:{{{dual_modem}}} | 1 |

{{#ifeq:{{{dual_modem}}} | 1 |

[[File:Networking_rutos_manual_serial_utilities_modem_control_default_{{{default}}}_dual_modem_v1.png|border|class=tlt-border]]|

[[File:Networking_rutos_manual_serial_utilities_modem_control_dual_modem_.png|border|class=tlt-border]]|

[[File:Networking_rutos_manual_serial_utilities_modem_control_default_{{{default}}}_v2.png|border|class=tlt-border]]

[[File:Networking_rutos_manual_serial_utilities_modem_control.png|border|class=tlt-border]]

}}

}}

       <td>off {{!}} on; default: <b>off</b></td>

       <td>off {{!}} on; default: <b>off</b></td>

       <td>Turns Full Duplex mode on or off. This option is available only on the RS485 device.</td>

       <td>Turns Full Duplex mode on or off. This option is available only on the RS485 device.</td>

     </tr>|}}

     </tr>|}}|}}

 

 

     <tr>

     <tr>

        <td>Start up message</td>

      <td>Start up message</td>

       <td>string; default: <b>none</b></td>

       <td>string; default: <b>none</b></td>

       <td>Message to print to serial device when modem control is ready.</td>

       <td>Prints message to serial device when modem control is ready.</td>

     </tr>

     </tr>

</table>|}}

      <td>Canonical mode</td>

      <td>off {{!}} on; default: <b>off</b></td>

{{#switch: {{{name}}} | TRB143 = | #default = ==Console==  

{{#switch: {{{name}}} | TRB143 = | #default = ==Console==  

<b>Console</b> mode requires no further configuration than the settings above and is used as a direct-access method to the device's shell interface. For this purpose you may want use such applications as PuTTY on Windows and microcom, minicom, picocom or similar applications on Linux.

<b>Console</b> mode requires no further configuration than the settings above and is used as a direct-access method to the device's shell interface. For this purpose you may want use such applications as PuTTY on Windows and microcom, minicom, picocom or similar applications on Linux.

[[File:Networking_rutos_manual_serial_utilities_console_default_{{{default}}}_v1.png|border|class=tlt-border]]

[[File:Networking_rutos_manual_serial_utilities_console_status.png|border|class=tlt-border]]

 

[[File:Networking_rutos_manual_serial_utilities_console_general.png|border|class=tlt-border]]

<table class="nd-mantable">

<table class="nd-mantable">