Changes

VXLAN Configuration Example (view source)

Revision as of 12:42, 8 October 2024

801 bytes removed ,  Tuesday at 12:42
→‎Configuration testing
Line 87: Line 87:  
#Click [[File:Save & Apply.png|90px]] twice
 
#Click [[File:Save & Apply.png|90px]] twice
 
[[File:Vxlan over wired lan physical settings RUT2.png|border|class=tlt-border]]
 
[[File:Vxlan over wired lan physical settings RUT2.png|border|class=tlt-border]]
−
  −
===Configuration testing===
  −
----
  −
The best way to test the configuration after setting up VXLAN between the routers is to ping between devices on either side of the routers using their LAN IPs and check the ARP tables. This ensures that devices on the same LAN segment can communicate over the Layer 2 (L2) network through the routers.
  −
  −
Configuration testing from RUT1 side:
  −
  −
[[File:Vxlan ping rut1 to rut2.png|border|class=tlt-border]]
  −
  −
If the MAC address for the specified IP address in the ARP table matches the RUT2's MAC address, it confirms that the configuration is functioning correctly.
  −
[[File:Vxlan arp rut1.png|border|class=tlt-border]]
  −
  −
  −
Configuration testing from RUT2 side:
  −
[[File:Vxlan ping rut2 to rut1.png|border|class=tlt-border]]
  −
[[File:Vxlan arp rut2.png|border|class=tlt-border]]
      
==VXLAN over Mobile network==
 
==VXLAN over Mobile network==
Retrieved from "https://wiki.teltonika-networks.com/view/Special:MobileDiff/133863"

Navigation menu