Changes

Navigate to '''Network > LAN''' and click [[File:Edit button.png]] to modify existing LAN interface.

Navigate to '''Network > LAN''' and click [[File:Edit button.png]] to modify existing LAN interface.

[[File:Vxlan over wired lan config rut2.png|border|class=tlt-border]]

[[File:Vxlan over wired lan config rut2.png|border|class=tlt-border]]

#For testing purposes, both routers should be part of the same LAN segment, so assign unique IP addresses to prevent conflicts.  

#For testing purposes, both routers should be part of the same LAN segment, so assign unique IP addresses to prevent conflicts. RUT2 will now be accessible using its newly assigned IP address.

#Additionally, only one DHCP server, so disable DHCP on RUT2.

#Additionally, ensure that only one DHCP server is active by disabling the DHCP server on RUT2.

[[File:Vxlan over wired lan settings RUT2.png|border|class=tlt-border]]

[[File:Vxlan over wired lan settings RUT2.png|border|class=tlt-border]]

#<li value="3">Asure that Bridge interfaces option is enabled

#<li value="3">Asure that '''Bridge interfaces''' option is enabled

#Click on the droplist and add vxlan1 interface

#Click on the droplist and add vxlan1 interface

#Click [[File:Save & Apply.png|90px]] twice

#Click [[File:Save & Apply.png|90px]] twice