505
edits
Changes
→Configuration on RUT1 device
# Click [[File:Save & Apply.png|90px]] twice
# Click [[File:Save & Apply.png|90px]] twice
[[File:Vxlan_over_wired_wan_settings_rut1.png|border|class=tlt-border]]
[[File:Vxlan_over_wired_wan_settings_rut1.png|border|class=tlt-border]]
#Default port is 4789
Navigate to the '''Network > Devices'''
Navigate to the '''Network > Devices'''
#In '''Add new device''' section select Type '''VXLAN'''
#In '''Add new device''' section select Type '''VXLAN'''
#<li value="3">Enter name of the new VXLAN interface
#<li value="3">Enter name of the new VXLAN interface
#Enter VNI (VXLAN Network Identifier). It identifies a specific virtual network in a data plane and performs a function similar to a VLAN ID in regular networks. The same VNI have to be used in RUT2 VXLAN interface settings.
#Enter VNI (VXLAN Network Identifier). It identifies a specific virtual network in a data plane and performs a function similar to a VLAN ID in regular networks. The same VNI have to be used in RUT2 VXLAN interface settings.
#
# Enter the Remote address corresponding to RUT2 wired WAN interface IP address
# Enter the Remote address corresponding to RUT2 wired WAN interface IP address
# Click [[File:Save & Apply.png|90px]] twice
# Click [[File:Save & Apply.png|90px]] twice
