0
edits
Changes
Template:Networking rut cloud of things (view source)
Revision as of 17:03, 27 November 2019
, 17:03, 27 November 2019no edit summary
[[Image:Cloud of things adding device 3.png]]
[[Image:Cloud of things adding device 3.png]]
There are two ways to register your device(s) '''Bulk''' and '''General'''. Bulk is used to register more than one device at once. In this example we will be using the '''General''' option.
There are two ways to register your device(s) '''Bulk''' and '''General'''. Bulk is used when you are registering a lot of devices at once. In this example we will be using the '''General''' option.
[[Image:Cloud of things adding device 4.png]]
[[Image:Cloud of things adding device 4.png]]
In '''Device ID''' section write the serial number of your router. You can add more than one item by pressing '''Add another device''' button. There is a possibility to assign your routers to groups, but we are not doing that in this example.[[Image:Cloud of things adding device 5.png]]
If everything was done correctly, it will show you that the registration was successful.
[[Image:Cloud of things adding device 6.png]]
[[Image:Cloud of things adding device 6.png]]
Then navigate to Registration page:
Then you will need to '''Accept''' the '''Pending Acceptance'''.
[[Image:Cloud of things adding device 7.png]]
[[Image:Cloud of things adding device 7.png]]
Finally you will receive a message showing that the device has been accepted.d.
[[Image:Cloud of things adding device 8.png]]
[[Image:Cloud of things adding device 8.png]]
[[Image:Cloud of things adding device 9.png]]
[[Image:Cloud of things adding device 9.png]]
Click „Accept“ button to accept this device.
Click „Accept“ button to accept this device.
