Line 1: |
Line 1: |
| == Introduction == | | == Introduction == |
| | | |
− | This article contains instructions o how to set up VLAN using a Teltonika-Networks device. | + | This article contains instructions o how to set up VLAN using a Teltonika-Networks device. Fallowing this example you will be able to create two different networks (network interfaces) and limit speed on one of the interface (or both of them). |
| + | |
| + | For this example I will be using RUTX11 device. |
| + | |
| + | == Creating VLAN == |
| + | |
| + | To create VLAN fallow all the steps bellow: |
| + | |
| + | * Access your devices WebUI by typing your Routers Private or Public IP in you browser (my router has private IP 192.168.1.1) |
| + | * Next navigate to: '''Network > Vlan > Port Based''' |
| + | * Now you'll need to add new VLAN and change first VLAN (ID:1) configuration. So basically you need to choose witch port you will use for yourself and turn that port Off in VLAN (ID:1). In my example I've choosen second ethernet port for myself. |
| + | I've turned off in first VLAN's LAN 2 port and in my new VLAN 3 I've turned on (by choosing Untagged) LAN2 port: |
| + | [[File:Vlan1.png|thumb]] |