Changes

[[File:BGP enable.png|none|border|left|class=tlt-border|700x700px]]

[[File:BGP enable.png|none|border|left|class=tlt-border|700x700px]]

On <b>BGP Instance</b> tab configure it like this:

Configure <b>BGP Instance</b> tab like this:

[[File:IBGP instance v2.png|none|border|left|class=tlt-border|700x700px]]

[[File:IBGP instance v2.png|none|border|left|class=tlt-border|700x700px]]

If you have followed the steps correctly, the configuration should be complete. Here are the results you can expect to receive:

If you have followed the steps correctly, the configuration should be complete. Here are the results you can expect to receive:

PC1 to PC2:

<b>PC1 to PC2:</b>

  Pinging 192.168.2.10 from 192.168.1.10 with 32 bytes of data:

  Pinging 192.168.2.10 from 192.168.1.10 with 32 bytes of data:

  Reply from 192.168.2.10: bytes=32 time=3ms TTL=62

  Reply from 192.168.2.10: bytes=32 time=3ms TTL=62

PC2 to PC1:

<b>PC2 to PC1:</b>

  Pinging 192.168.1.10 from 192.168.2.10 with 32 bytes of data:

  Pinging 192.168.1.10 from 192.168.2.10 with 32 bytes of data: